Many inexperienced owners of the Lada Granta Liftback (Sedan) claim that the door sills from the Lada Kalina are compatible with the Granta. This is partly true, if you don’t measure it down to the millimeter.
In fact, after installing the plastic thresholds from Kalina, an overlap of a couple of centimeters is formed. The value is not critical, for many it is completely unnoticeable, but complete compatibility should not be asserted.
Review of prices for original thresholds and their analogues for the Lada Granta Liftback
Article/index OEM | Price in rubles per unit |
Original (Sedan, Liftback) | |
Lada 99999219004200 | from 350 |
Lada 999992190042/24 | —/— |
Lada 999992190042/27 | —/— |
Lada 999992190042/42 | —/— |
Analogs | |
Stainless steel9999921924 | from 1600 |
Polished steel LAGR.31.3772 | from 2500 |
NP.6002.3 (stainless) | from 1600 |
LAGR.31.3773 (engraving, drawing) | from 2000 |
NPLAGRA011 | from 1600 |
*prices are current as of 10/01/18.
Preparatory stage before installing thresholds on the Lada Granta Liftback
Required tools:
- Phillips head screwdriver;
- a set of linings, the type is chosen by the owner based on preferences;
- plastic pistons (at “6”) and cone-shaped screws with a flat head for screwing in in the amount of 16 pieces, 4 for each of the thresholds;
- stationery knife, side cutters;
- doorway seal, subject to damage (wear) of the previous one.
Do-it-yourself installation of plastic thresholds on the Lada Granta
You ordered the treasured thresholds from the store, picked them up and are about to install them. To do this, you will need the following set of tools:
- Crosshead screwdriver;
- Slotted screwdriver;
- A stationery or pocket knife (the latter is preferable);
- Wire cutters;
- Self-tapping screws or self-tapping screws (if not included, select your own).
First of all, we will remove the protective rubber bands that seal the connection between the door and the thresholds. Afterwards you will need to detach the small plastic element that protects a small area on the inside. The factory carpet is attached with ordinary construction staples; they will have to be bent using a slotted screwdriver or knife (be extremely careful). Having folded back part of the interior covering, find the standard rectangular holes. Clips (a kind of plastic sleeve) are placed in these holes. Using a knife, you will need to make slits in the sheathing in places where the carpet covers the holes.
Please note that the slot must clearly follow the shape of the clip. If you make it smaller, the clips will not sit in the mounting hole and may rise up when the screw is screwed in.
At this stage, it is already possible to return the door seal to its proper place. All that remains is to figure out how the trim will be located on the threshold and simply screw it on using self-tapping screws or screws prepared in advance. Do not overdo it: it is very easy to twist the self-tapping screw, you should not tighten it too much. Otherwise, you will have to remove the clip and replace it with a new one (a twisted one will not hold the fastener, and such fasteners will be of no use).
Video instruction
To protect the carpet in the interior of Lada Granta, Kalina and Priora cars, the plant installs plastic door sill covers. However, these accessories are not available on simpler trim levels. Let's figure out whether such threshold covers are needed and how difficult it is to install them yourself.
The main purpose of internal door sill trims is to protect the edges of the carpet from dirt and dust. This is especially true for owners who transport children in their cars.
Currently, you can buy a set of plastic door sill covers for 300-650 rubles (without delivery). You can find them in online stores by catalog numbers:
- Front right (Granta/Kalina – 1118-5109076; Priora – 2170-5109076)
- Front left (1118-5109077 and 2170-5109077)
- Rear right (1118-5109078 and 2170-5109078)
- Rear left (1118-5109079 and 2170-5109079)
If the kit does not include mounting screws (16 pcs) and bushings (16 pcs), then they can be found using article numbers 1118-8212786 and 1118-8212778, respectively.
Sequence of actions when setting thresholds
- We place the car on a level platform, open the doors, and begin dismantling work.
- We start with the driver's door, unscrew the four standard screws from the trim, and remove it.
- We insert polymer pistons into the holes, they fit perfectly.
- We apply the threshold and screw it with self-tapping screws.
When it comes to installing stainless steel trims and decorative inserts on the outer threshold, we use double-sided tape instead of screws. We pre-treat the surface, remove dust, dirt, and moisture.
Some service stations and tuning studios practice fitting metal onto self-tapping screws, but not every owner agrees to drilling a number of through holes in the car. By analogy, we complete the installation on the remaining sections of the thresholds.
Reviews
№ | Positive |
1. | Alexander , 32 years old: of course, there was a catastrophic lack of additional inserts in the standard configuration. After two years of using the car, the paint began to peel off. On the recommendation of friends, I installed overlays from Lada Kalina. They are a couple of centimeters longer, but the fastenings are the same. |
2. | Kirill , 32 years old: after buying a car from the showroom, I installed polymer door sills. Now the paint will not be damaged. |
3. | Mikhail , 41 years old: a garage friend bought stainless steel pads and installed them with double-sided tape. It looks beautiful. I did it by analogy. No complaints, I'm happy. |
4. | Vitaly , 35 years old: despite the negative comments about the thresholds from Kalina, I installed them for myself and they fit well. I sawed off two centimeters in length. |
5. | Vyacheslav , 44 years old: on the recommendation of his comrades, he glued the stainless steel overlays onto double-sided tape. My advice to motorists. |
Negative | |
1. | Victor , 29 years old: dissatisfied with the quality of manufacturing of domestic plastic pads. There is no money to buy stainless steel. I heard that you can insert it from a second generation Opel Astra, albeit cut a little in length. I will try. |
2. | Vasily , 41 years old: despite the wide range of accessories, there is no good quality. Instead of wasting money, I installed rubber pads, having previously cut them according to the blank. |
3. | Ignat , 39 years old: when buying pads, I preferred stainless steel, I didn’t like plastic. Although I overpaid a little, I am confident in its practicality. |
Conclusion Despite a number of negative reviews, it is necessary to install door sill covers. As for the cost, we start from the size of the allocated budget for accessories. Obviously, we consider plastic as the best option. We also take into account the temperature conditions in which the machine will be operated.
Read also: Girl sitting on guy's lap
Video - LADA GRANTA and door sills
Price: | 3,000 rub. |
Availability: | Available to order |
Vendor code: | gsp-2190.03 |
Applicability: |
On years | since 2011 until 2021 |
By brand | Lada Granta (VAZ 2190) (+), Lada Granta (VAZ 2191) (+), Lada Kalina-2 (VAZ 2192) (+), Lada Kalina-2 (VAZ 2194) (+) |
Options: | |
Save: |
How to install standard door sills for Lada Granta?
In order for the element to really last a long time, you need to take care of the quality of the installation. First, you will need to purchase the kind of Lada Granta door sills that fit the model. You can also focus on accessories from the Lada Kalina, which have identical dimensions.
You can also consider modern products, but they exactly meet the stated requirements in terms of parameters. Once the pads have been purchased, installation can be carried out according to the following instructions:
Product description:
Original door sills "Granta Sport" are supplied to AvtoVAZ for installation on special modifications of cars, which are called Granta Sport.
Attention!
Thresholds "Granta Sport" are ORIGINAL!
The price is for a set of 2 pieces!
Thresholds "Granta Sport" are made of impact-resistant, unstructured ABS plastic using thermo-vacuum molding. Products obtained using this technology have a number of advantages over similar products made from other materials:
- high hardness, wear resistance and durability;
- non-toxic, increased impact resistance and elasticity;
- good adhesion to primers and paints and varnishes;
- resistance to solutions of acids and inorganic salts;
- resistance to fuels, lubricants and alkalis;
- exceptional resistance to atmospheric conditions;
- wide range of operating temperatures (long-term operating temperature, from -40 to +80°C).
What are the thresholds for the Lada Granta?
Regular plastic models, durable steel analogues, as well as designer products are produced. Grant's standard plastic door sills attract buyers with their low cost.
With careful use, the elements will last for more than a year. But stainless steel linings, although they have a higher price, can last several times longer. Their only drawback is the appearance of small scratches on the surface a few years after installation.
Special designer products are also very practical, but have an original and stylish look. For the most part, for the new Lada Granta, door sill covers from private developers may have an attractive glowing emblem or name.
Additionally, the elements are coated with a special compound that prevents minor damage to the steel surface. True, such accessories are quite expensive and require time-consuming installation.
Delivery methods to Togliatti
We deliver tuning to the regions of Russia and the CIS countries through transport companies: Business Lines, PEK, Energia, Ratek, KIT, Baikal Service and ZhelDorExpedition.
The exact cost of delivery to the destination city can only be calculated by an employee of the transport company after the goods are delivered to their warehouse. The cost of delivery by our car to the terminal is 100 rubles.
Intercity freight transportation is paid separately upon receipt of the goods you ordered!
This is exactly the settlement that our system automatically identified. If you are located in another location, please indicate it below to correctly calculate the delivery cost:
With “Kalina 2 Sport” thresholds, your Lada Granta (VAZ 2190, 2191 Liftback), Kalina 2 (VAZ 2192, 2194), Datsun will receive an updated appearance. The modern design of the sills allows you to give the car a sporty appearance.
Made from impact-resistant ABS plastic. Painting is carried out using factory technologies in compliance with all technological stages, which ensures high quality of products. Installation is carried out in a regular place.
The price on the website is indicated with painting in the body color, do not forget to indicate the desired color in the “additional information” line, it is also possible to buy thresholds without painting, the cost in this case will be 1,700 rubles per set.
When painting, you can combine colors, as in the presented photo.
Price: RUB 3,000 Availability: Available for order Article: gsp-2190.03 Applicability:On years | since 2011 until 2021 |
By brand | Lada Granta (VAZ 2190) (+), Lada Granta (VAZ 2191) (+), Lada Kalina-2 (VAZ 2192) (+), Lada Kalina-2 (VAZ 2194) (+) |
Product description:
Original door sills "Granta Sport" are supplied to AvtoVAZ for installation on special modifications of cars, which are called Granta Sport.
Attention!
Thresholds "Granta Sport" are ORIGINAL!
The price is for a set of 2 pieces!
Thresholds "Granta Sport" are made of impact-resistant, unstructured ABS plastic using thermo-vacuum molding. Products obtained using this technology have a number of advantages over similar products made from other materials:
- high hardness, wear resistance and durability;
- non-toxic, increased impact resistance and elasticity;
- good adhesion to primers and paints and varnishes;
- resistance to solutions of acids and inorganic salts;
- resistance to fuels, lubricants and alkalis;
- exceptional resistance to atmospheric conditions;
- wide range of operating temperatures (long-term operating temperature, from -40 to +80°C).
Delivery methods to Togliatti
We deliver tuning to the regions of Russia and the CIS countries through transport companies: Business Lines, PEK, Energia, Ratek, KIT, Baikal Service and ZhelDorExpedition.
Read also: Cartoon about an excavator and KAMAZ
The exact cost of delivery to the destination city can only be calculated by an employee of the transport company after the goods are delivered to their warehouse. The cost of delivery by our car to the terminal is 100 rubles.
Intercity freight transportation is paid separately upon receipt of the goods you ordered!
This is exactly the settlement that our system automatically identified. If you are located in another location, please indicate it below to correctly calculate the delivery cost:
Every car enthusiast encounters clutter and contamination of trim elements in the cabin; thresholds for the Lada Granta can help solve the problem; we will look at their price description and do-it-yourself installation in this article. Dirt is carried into the interior on shoes - a natural process. To protect the body and trim from dirt, the car contains mats and door sills made of polymer materials. And if modern cars have floor mats by default, they are often left without protection, especially in budget trim levels. In this case, you will have to install them yourself.
Why install Granta door sill covers and which products should you choose?
The main task of the overlays is to protect the transition from the threshold to the floor of the cabin. The driver and passengers will no longer cling to the mat. At the same time, water in the area of the thresholds will not flow to the base.
For modern Granta, sill covers can increase the life of the car and protect it from unnecessary damage and rust formation. The elements will also give the vehicle a more stylish and solid look.
When choosing accessories, you should pay attention to the activity of car use. If the owner rarely travels by transport, then plastic door sill covers for the Lada Granta will do just fine, which will save personal funds.
If the car is used for work or daily personal trips, then the installation of stronger and more durable elements will be required. These can be ordinary steel plates or designer accessories.
The advantages of the last two types are their high wear resistance. In most cases, the linings will serve the owner as long as the car itself. They do not require special care, but you need to remember the need for professional installation of designer products.
Grant's original illuminated door sills need to be connected to power. Otherwise, the LEDs simply won't work.
Price and articles. Where can I buy?
You can buy door sill covers for the Lada Granta both from official dealers and in any auto accessories store, both online and regular. Noting right away that in car dealerships the selection of such accessories is usually small, and the prices are significantly more expensive than in online stores. For convenience, we post a table with the most popular options, as well as prices and their catalog numbers, at which you can buy linings in various online stores.
The price depends on the type and the specific seller, the table shows the average value based on the most popular online stores.
Types of door sills for Grants
Cars from domestic manufacturers are delivered incompletely and with defects, which the owner has to eliminate on his own. Modern VAZ products, although different from their Soviet-made counterparts, still have a lot of minor flaws. In this regard, foreign cars have gone far ahead. On Grant, the thresholds are made of easily soiled material that quickly becomes dirty. To avoid this, you will have to install them yourself.
The domestic market of auto accessories includes more than one thousand items, for every color and taste. Car door sills can be divided into 3 main groups:
What's the difference? Let's try to figure it out.
Plastic elements are most often found on our way. They are inexpensive, and some cars are equipped with them from the factory. The manufacturing quality of such linings is quite high. The features of the plastic from which the linings are made allow them to absorb impacts on the body sills and leave the factory paint layer intact. If it receives a strong blow, the plastic takes everything on itself and, in the worst case, it simply breaks. In the warm season this is unlikely, but in winter it is a common occurrence. The fact is that the plastic from which these protective elements are made changes its properties in the cold and becomes more brittle. But it is better to replace the trim than to repair damage to the surface of the body. Even if the paint layer can be restored, almost nothing can be done about the dent. In car dealerships there are linings made of durable shockproof plastic, but finding them is quite problematic: demand greatly exceeds supply.
Decorative thresholds appeared on mass sale not so long ago. Basically, they are made of fiberglass: an elastic material that is resistant to abrasion. Although fiberglass is susceptible to cold and hardens in the cold, it is more resistant than plastic elements in the lower price segment. They are intended not so much for protection, but to complement the design of the car. Still, the material is universal and lends itself well to painting. Here you can also find overlays with various bells and whistles, such as backlighting. It looks very interesting, especially in the dark. The only disadvantage of luminous overlays is the fragility of the design. And they will have to be washed much more often than utilitarian plastic.
Read also: Valvoline 5w30 engine oil
Chrome door sills for Lada Grante are the most expensive option. This set looks very presentable, because they are mostly made of stainless steel. Steel ones are the most durable of all and are less susceptible to mechanical damage, and they do not react at all to aggressive environments (road reagents, dust and dirt). Stainless steel is very elastic, thanks to which it absorbs almost any impact. Such protection is not cheap: steel linings are the most expensive on the domestic market of automobile accessories. Steel allows you to apply chrome or nickel to the surface, this makes the car look more attractive.
What pads are best for the Granta? We think it's plastic. Kalina is equipped with plastic protection from the factory. And practice of use shows that plastic elements cope with their task perfectly. By the way, there is a tendency among car owners to use overlays from Kalina on Grant. You can use this experience if you haven’t found anything suitable in the auto store. Plastic covers are quite cheap and very practical.
Door sills for Lada Granta - article numbers, prices, where to buy, and do-it-yourself installation
Every car enthusiast encounters clutter and contamination of trim elements in the cabin; thresholds for the Lada Granta can help solve the problem; we will look at their price description and do-it-yourself installation in this article. Dirt is carried into the interior on shoes - a natural process.
To protect the body and trim from dirt, the car contains mats and door sills made of polymer materials. And if modern cars have floor mats by default, they are often left without protection, especially in budget trim levels.
In this case, you will have to install them yourself.
Price and articles. Where can I buy?
You can buy door sill covers for the Lada Granta both from official dealers and in any auto accessories store, both online and regular.
Noting right away that in car dealerships the selection of such accessories is usually small, and the prices are significantly more expensive than in online stores.
For convenience, we post a table with the most popular options, as well as prices and their catalog numbers, at which you can buy linings in various online stores.
ManufacturerDescriptionArticlePrice (average), rub
Lada | Stainless steel | 99999219004200 | 1 600 — 2 500 |
SOYUZ-96 | Polished steel | LAGR.31.3772 | 2 100 — 3 000 |
Rival | Stainless steel | NP.6002.3 | 2 000 — 2 500 |
Soyuz 96 | With an image | LAGR.31.3773 | 1 000 — 2 600 |
Auto ARMOR | Stainless steel | NPLAGRA011 | 1 000 — 1 500 |
Types of door sills for Grants
Cars from domestic manufacturers are delivered incompletely and with defects, which the owner has to eliminate on his own.
Modern VAZ products, although different from their Soviet-made counterparts, still have a lot of minor flaws. In this regard, foreign cars have gone far ahead.
On Grant, the thresholds are made of easily soiled material that quickly becomes dirty. To avoid this, you will have to install them yourself.
The domestic market of auto accessories includes more than one thousand items, for every color and taste. Car door sills can be divided into 3 main groups:
What's the difference? Let's try to figure it out.
Plastic elements are most often found on our way. They are inexpensive, and some cars are equipped with them from the factory. The manufacturing quality of such linings is quite high.
The features of the plastic from which the linings are made allow them to absorb impacts on the body sills and leave the factory paint layer intact. If it receives a strong blow, the plastic takes everything on itself and, in the worst case, it simply breaks. In the warm season this is unlikely, but in winter it is a common occurrence.
What are the internal door sill trims for?
Door sill covers for Lada Grants primarily perform a protective function. With their help, you will protect the paint layer from mechanical damage and prevent road reagents, dirt and sand from getting under the carpet in the cabin. The fact is that passengers, when boarding, very often touch the floor covering in the cabin with their shoes, which is why particles of the road surface and other things that should not get there get there. If this is ignored, over time the body floor will begin to rust and deteriorate. And protection has no less priority: this part of the body most often comes into contact with shoes and chips, scratches and other defects appear in the area, worsening the condition of the metal of the body. There are no special lotions to protect the interior of the body from moisture and dirt, and therefore it is simply necessary to install door sill covers on the Lada Granta.
Another function they perform can be considered aesthetic. And now there are many options for decorative elements in car dealerships: simple, stylized for a specific car, chrome-plated, luminous, etc. There are so many of them, it would be difficult to list them all. In small towns there is little choice, and therefore very often car owners find a wide range in online stores. The difference in relief, colors, branded logos of manufacturers - all this makes threshold covers not only a protective element, but also a decorative one. You can always choose a set that matches the color of the interior.
Lada Granta internal door sill covers
Every motorist has had to deal with an unpleasant situation - significant contamination of the interior.
The penetration of dust and dirt compounds onto decorative carpet upholstery is not so dangerous, because cleaning can be done using a regular car vacuum cleaner.
But, nevertheless, now there are special sill covers, as well as internal linings that will help make your task easier.
https://www.youtube.com/watch?v=ZmgZhkJiMs0
What to do if moisture penetrates into the interior and provokes the occurrence of corrosion spots? To do this, there is an excellent and relatively inexpensive option for solving this problem - using door sills. Self-installation of linings directly on the Lada Granta sills takes no more than an hour and a half.
What options are there for Granta threshold covers?
Door sills for the Lada Granta can be roughly classified according to the following criteria:
- plastic products;
- steel options with increased strength;
- designer products.
Standard thresholds for Granta made of plastic attract an army of buyers with its affordable cost. If you use them with care, they can “live” for more than one year.
Thresholds on Grant, made of stainless steel, although they are characterized by a slightly higher cost, can “last” an order of magnitude longer. Their main drawback is the appearance of a small number of scratches after a long period of use.
Designer door sill covers will also delight you with their practicality and, in addition, they are endowed with a unique appearance. In most situations, these privately produced products carry a message or logo on their surface.
If the steel surface of an element has additional elements, they are coated with a special composition that prevents scratches. The price of these accessories for Lada Granta is very high, and the installation process is more labor-intensive.
Why is it installed and what type of product is preferable?
The main purpose of the accessory is the protective function of the transition area between the threshold and the bottom in the LADA Granta interior. The product eliminates the unpleasant moment when the driver or passengers “cling” to the mat. In addition, the pads will prevent water from flowing under the thresholds. It is also advisable to use internal linings.
Mounted accessories allow you to slightly extend the service life of the body, since they protect its elements from moisture and the appearance of corrosive formations. An undeniable advantage will be the fact that it gives the car a stylish look.
Before choosing thresholds for the Grant, you should carefully evaluate the activity of the car. If traveling is a rare activity, then it would be rational to make do with plastic decorative elements. This approach allows the owner to save a certain amount of money.
If the operation of the Lada Grant is active, then it is recommended to resort to installing durable products. These may include ordinary decorative elements made of steel or expensive and sophisticated design elements.
The main advantage of the last two options is excellent wear resistance. In the vast majority of cases, these linings will last a period equal to the period of operation of the Lada Grant. These accessories do not require special care, but will require professionalism during installation, especially with regard to designer products.