Sell your old car and immediately buy another car model. This tempting idea is perfectly implemented by the “Trade in” program or the “key-to-key” car exchange service. Popular in Western countries, procedures for simultaneous redemption of an old car for the cost of a new car are still new on the Russian market. What are their advantages? Let's talk about this further.
“Trade in” or changing the car “key to key”
The “Trade in” service involves the sale of a used car, the proceeds from which go towards paying for a new model. In this way, the owner only has to pay a fixed amount in order to transfer to a new vehicle.
Key-to-key car exchange differs from the previous service in that the owner exchanges his car for a suitable used model, subject to an appropriate surcharge.
These two relatively new ways of buying cars eliminate the risk of fraud that is common when a car is sold second-hand on the market. Transactions are formalized by leading auto companies in accordance with the current legislation of the Russian Federation.
Tuning of the engine, electrical equipment, gearbox and clutch of the VAZ 2108
If you want to improve the engine, it needs to be sealed, the carburetor and ignition distributor are adjusted.
The life of the VAZ 2108 engine directly depends on the condition of the timing belt.
When tuning a gearbox, you should know what you want to achieve, since with sports improvements the engine is “killed” very quickly.
Locking the differential will give you a win at any start, will give you confidence on a dangerous slippery road, but will contribute to the rapid wear of the rubber.
If the clutch wears out 50,000 km, then the next one wears out the same amount.
Exchange a car as soon as possible
If you have a desire to change a used car by exchanging it for a new model or become the owner of a car with improved external or technical parts, then the services of the Avtoskupki company are what you need.
Cars can be purchased in any condition and at any time. An expert assessment of the company’s specialists will allow us to formulate the best price for a specific car. In return, the client will be offered the most suitable car models with an objective surcharge.
What materials may be needed?
When insulating a car interior, you can use the following materials:
- Vibroplast Silver. This material has a fairly high level of flexibility and has a self-adhesive base. There is also aluminum foil that acts as a base. On the reverse surface there are markings in the form of squares with a side of 5 centimeters. The material has a special structure that does not absorb moisture and does not collapse under the influence of the environment. Other important operational features include anti-corrosion properties. Installation is quite simple; the surface should not be heated during use. The standard thickness of the material is 2 millimeters. Can be used to cover the floor, roof, sides of the body, doors, front shield and other elements of the car.
- An alternative insulating material to the first one can be called Gold vibrator. In this case, you should pay attention to the fact that the standard thickness of the layers is quite high, which means the insulating qualities increase. As a rule, the thickness of the material in question is 2.3 millimeters.
- BiMast Bomb is also a material that can absorb vibration. The material is a complex structure that has a bitumen base. It is worth noting that to activate the bitumen base, it is recommended to heat the material to 50 degrees Celsius, for which you need to use a heat gun. Like many other materials, this material does not absorb moisture. The conducted studies indicate that BiMast Bombs have a higher efficiency. The material is ideal for preparing acoustics for use. The thickness of one layer is 4.2 millimeters. VAZ 2108 interior tuning in almost all cases is carried out using a similar vibration-absorbing material.
- Splen 300 is a soundproofing material that has increased insulating properties. Its features include the fact that installation on a vertical or curved surface can be carried out without any particular difficulties. The structure does not absorb moisture and also does not react to other environmental influences. The thickness reaches 4 millimeters and can be used at temperatures from 0-40 to 70 degrees Celsius. Used to cover doors, tunnels, front engine shields. There are several options for this material. For example, splen 3008 has a thickness of 8 millimeters, splen 3022 has a thickness of 2 millimeters. Please note that it is recommended to apply the film at temperatures from 18 to 35 degrees Celsius. At ambient temperatures less than 10 degrees Celsius, the initial adhesion rate is significantly reduced. The protective layer should be removed immediately before using the material.
- Bitoplast 5 is used as a sealing material, as it has a polyurethane foam base. High water resistance means that the material does not decompose for several years and provides reliable insulation. Properties are maintained at a temperature of -50 degrees Celsius. The thickness can be 5 or 10 millimeters.
- Accent 10 is a good choice for reducing the amount of sound inside the car. The structure is represented by a metallized film base, which has a mounting layer on the surface. Studies indicate that the material is capable of absorbing up to 90% of outgoing noise. The thickness of one layer is 10 millimeters; it can be used at temperatures from -40 to +100 degrees Celsius. As a rule, it is used to improve the sound insulation of partitions in the engine compartment, hood or trunk.
- Madeline is a sealing and at the same time decorative material, which is made on a fabric basis. The material has a small thickness - up to 1-1.5 millimeters. There is an adhesive composition on the surface. It is used to isolate various gaps, the thickness of which reaches several tens of millimeters. The material can also be used for play in the air supply system to the cabin.
The above list of materials is only a small part of what can be found on sale.
Insert: Important: VAZ 2108 interior tuning should begin with work to improve sound and heat insulation; it is necessary to completely dismantle all trim elements.
How to profitably exchange a used car
To guarantee the legality of the used car exchange service and its objective cost, the purchase and sale process should be carried out at a trusted auto center. Here the client will be offered:
- Diagnostics of the old model, on the basis of which its cost will be determined;
- Selection of cars for exchange, completely new or with a clean mileage history: all cars undergo forensic examination, therefore the car dealership will never sell a car with a “dark past”;
- Legal support of the transaction: the client enters into a notarized agreement and, if necessary, can use the credit services of the car dealership’s partner bank;
- Efficiency of the service: the client does not need to look for buyers for his vehicle; he does not need to settle issues with the traffic police or the bank. The listed functions are the task of the auto center.
Read here! Tuning Ford
Thus, with minimal documents, it is possible to buy an improved car within one to three days. The used car exchange service makes it possible to regularly change the owner’s vehicle fleet by purchasing its best models.
Tuning ideas
Improvements are being made for the sake of comfort, beauty, and safe driving:
- Greater convenience is added by installing an electric drive for the trunk lock. Now you can open it without leaving your car.
- Electric windows are not a fad. They serve the safety of the driver and passengers.
- Tuning electrical equipment involves replacing factory wires with silicone ones.
- New windshield wipers give the car a well-groomed appearance.
- Old-style cars have poor sound insulation. Manufacturers didn't care about it back then. It is difficult to talk to each other while driving inside the V8. Tuners easily eliminate this inconvenience.
They remove the old trim throughout the entire cabin, even from the ceiling. Clean and degrease the surface. Glue two layers of insulating material. The old casing is thrown away. The modern one consists of two layers: foil and a material with increased viscosity at high temperatures.
The sheathing fills in any unevenness. The level of driving comfort increases because there is no wind noise, engine sound, or tire friction on the road.
