How to properly install parking sensors on the Lada Granta

Many owners of AvtoVAZ cars are interested in installing parking sensors on the Lada Granta. The use of personal vehicles implies a certain level of comfort at all stages of work. Beginners and experienced users may have certain difficulties when parking, which can be solved by installed parking sensors.

If this is not a “Luxury” Granta package or a custom-built car, then the parking element is not included in the basic set. But even the average driver, who does not have much knowledge of how a car works, can make his life easier by installing parking sensors himself.

Review of manufacturers and tips for installing parking sensors on the Lada Granta Liftback

A parking sensor, also known as parking sensors, is installed as standard equipment on the Lada Granta Liftback in the Luxury Premier configuration. Previous modifications do not have this bonus.

You can install parking sensors on the Granta Liftback (hereinafter referred to as DP) yourself; the installation work is not complicated. The main thing is to follow the instructions and avoid haste.

We will tell you further about how to professionally install the DP on the Lada Granta Liftback.

Additional installations and features of interior equipment Grants “Standard”

The initial equipment of the Granta Standard cabin is quite modest, but this in turn is a kind of advantage. The buyer, if desired, will be able to ideally re-equip the vehicle for personal use and supplement it with everything necessary.

When purchasing from a car dealer, you can find out the cost of all installations and their availability. And since the price of the car itself is quite small, with a minimal investment you can buy everything you need and even re-equip it yourself. The most popular modifications among new owners of the standard equipment are the following:

1. Passenger handrails.

2. Central locking.

3. Airbags.

4. Anti-theft alarm.

5. Lamp lamps for the rear row and trunk.

6. Rear seat headrests.

The car is initially equipped with ISOFIX child seat mounts and special latches for locking the rear locks. Additionally, the standard Lada Granta equipment to provide increased protection includes an immobilizer that allows you to lock the vehicle systems. The vehicle is equipped with daytime running lights.

The rear seats have a common design without a 40:60 split, and a special automotive fabric with increased strength and wear resistance is used as a cover for the seats. Like all other models in this series, there is a sun visor for the driver.

The model is equipped with 13-inch wheels; in addition, the owner receives a spare 13-inch full-size wheel. The model's bumpers are painted in body color, which allows you to give the car a perfect look.

The buyer is offered the Grant Standard equipment in a color scheme consisting of classic colors (white, black, silver). Metallic tones for this modification must be ordered separately.

It is also possible to further re-equip the exterior with new bumpers and a radiator grille, since the standard assembly features simplified but durable body elements.

Modifications of parking sensors on the Lada Granta Liftback

The installation location of the monitor (display) is universal, at the driver’s personal discretion. For convenience, the DP is mounted on the front console above the rearview mirror.

The parking sensors beep if the distance to an obstacle is 0.2-0.5 m. The shorter the distance, the more frequent the signal.

Types of systems

The parking sensor design described above is considered outdated and primitive. Two sensors built into the rear bumper are able to “see” only solid obstacles located behind the car. Objects in the form of poles and street trash cans that are shifted away from the center of the car may not be detected by the devices. The reason is that the area behind the vehicle is too narrow. There is no front collision insurance at all.

Therefore, the following types of parking radars are installed on modern cars:

1. Budget version - 3 sensors in the rear bumper, one in the middle, two on the sides. Unfortunately, with such an arrangement, there are “blind” spots behind the car.
2. Full coverage of the space without “blind” spots is provided by 4 ultrasonic devices mounted in the rear body kit at intervals of 40 cm.
3. Two sensors in the front bumper and 4 in the rear. This system allows you to safely park in reverse and maintain a distance from large objects located in front.
4. The most expensive version - eight devices (4 pieces in each body kit) is relevant for novice drivers. Parking sensors fully control the space in front and behind the car.

Note. To prevent sound or voice signals from distracting the driver while driving, a group of tracking devices has been disabled, and in some modifications one specific parking sensor can be deactivated.

The screen with a scale does not give the driver a clear picture of what is happening behind and in front of the vehicle. It indicates approaching an obstacle and signals when the distance to the surface of the object becomes dangerous. The full picture can be seen on the liquid crystal display installed on the center console of many modern cars.

The display receives the image from at least two cameras combined with ultrasonic sensors. A marking grid is superimposed on the picture, using which the driver can easily determine the remaining distance to the object. Reversing is also accompanied by voice prompts (the function can be turned off if necessary). The parking sensors are designed in such a way that they are activated after switching to reverse gear; the system does not function while driving.

The latest modifications of electronic devices are equipped with several additional functions:

• the screen shows not only a picture with a superimposed grid, but also the trajectory of the car;
• instead of a display, the image is displayed directly on the windshield (the so-called projection), the driver does not need to look from the road to the screen;
• display of various useful data - date, current time, mileage and outside temperature.

Review of Manufacturer Prices

*prices are current as of October 11, 2018

Recommendations for choosing a manufacturer

There is a wide range of products on the market, but not always of high quality. Carefully check the package contents and the presence of a warranty card. Be sure to request the provision of a sales receipt as a guarantee of the legality of the transaction and the possibility of return if defects are detected.

Which parking sensor is better to choose?

Four sensors in the rear bumper of a car

When choosing parking sensors, you first need to focus on the number of sensors. Models currently available for:

• Two or three sensors. Parking radars with 2 or 3 sensors are generally considered to be outdated and uninformative. To cover all possible blind spots, there must be at least four parking sensors in the rear.
• Four sensors. All of them are installed on the rear bumper. And this amount is sufficient to “see” everything that is happening behind the car. Parking sensors with 4 sensors are very popular due to their low price, but do not provide information about obstacles ahead.
• Six sensors. Most drivers consider parking sensors consisting of six sensors (the so-called “all-round” parking sensors) to be optimal in terms of the combination of price and information content. Four are installed on the rear bumper, approximately 40 cm apart. Two more are mounted in the front bumper. This installation scheme for parking sensors has good information content and reliability. Modern models have the option of turning off sensors in the front or rear. If desired, the driver activates sensors only on the front or rear of the vehicle.
• Eight sensors . These are expensive models of parking sensors. But many novice drivers choose them, since parking radars with eight sensors detect any obstacles. The use of parking sensors with a large number of sensors has some peculiarities. Often, when driving, an overly sensitive radar distracts the driver. Therefore, devices with eight or ten sensors turn on for approximately 20 seconds at the beginning of movement. Then they are activated only when braking. Some models can be turned off by the driver using a button.

Typical characteristics of parking sensors

Preparatory stage before self-installation of parking sensors on the Lada Granta Liftback

Required tools and materials:

What is parking sensors in a car?

The vast majority of modern motorists prefer this useful device. Very often, especially novice drivers, have difficulty parking their car. They struggle with anxiety and fear of harming their own or a nearby car, and all these worries are in vain if they have equipped their car with parking sensors.

Parking sensors are designed to help motorists in the most inconvenient and difficult situations - for example, when you need to park with your back to a wall or another car and there is no way to visually assess the distance to an obstacle. By installing parking sensors in your car, you will greatly facilitate the process of parking, even in the most inconvenient places, you will be able to protect your car from accidental damage, and yourself from waste associated with such troubles. Therefore, many people prefer the parking sensors comfortable parking system and know what it is firsthand.

A parking radar, or an acoustic parking system (APS), is installed to provide easier maneuvering and avoid collisions while parking and driving the vehicle. The “smart” system is able to recognize all objects that are in an area poorly visible to the driver, and those that are completely impossible to see from the driver’s seat. The system notifies the driver through sounds and/or graphics that the vehicle is approaching an obstacle, and the alerted driver performs the necessary maneuvers to avoid a collision.

The first parking sensors were equipped with high-class cars of very popular brands. This new invention immediately received positive responses from owners of expensive cars and became very popular. Now, thanks to large-scale production, parking sensors are installed by many manufacturers. If the car does not have parking sensors, then it can be installed without any problems at any car service center. If you have the skills to repair a car, or are familiar with maintenance, then you can carry out the procedure for installing parking sensors yourself, having previously selected the type of parking system you need.

Reviews

Conclusion

The parking sensors accessory is necessary for those drivers who often use the car in urban areas, in conditions of limited visibility. When purchasing a gadget, pay attention to its packaging and the presence of an instruction manual.

You can install parking sensors on the Grant Liftback yourself. The algorithm is intuitive; it is not necessary to contact a service center.

Follow safety rules, use insulation and corrugated hoses for laying wires.

Source

What are the features of using parking sensors?

Having studied enough information about the parking system and looked at the parking sensors in the photo, you have made your choice and installed the miracle device in your car. It should be remembered that technology needs human care. And in order for its operation to be trouble-free and correct, it is necessary to take into account the nuances listed below and try to prevent them. Problems in the operation of parking sensors can be created by:

• dirt, ice and snow stuck to the sensors;
• if the car is moving on an uneven road or on an incline;
• rough terrain can also cause misleading signals;
• increased noise;
• adverse weather conditions;
• radio;
• dents and holes in the asphalt;
• not closed sewer hatches;
• sharp or thin objects.

Be sure to take note of this and do not rely 100% on technology, because it cannot always ensure your safety.

The main prerogative of parking sensors is the ability to monitor areas that the driver cannot control from his seat, i.e. so-called “blind spots”. This will help avoid accidents and other difficulties for the driver on the road.

Autolikbez October 25, 2017

Not every driver is able to “feel” the dimensions of the vehicle and accurately drive close to various obstacles and other cars, which is quite important in urban conditions. An assistant in such a situation is a parking radar (parking sensors), which appeared in the design of imported cars back in the 90s of the last century. The task of the electronic device is to prevent a collision by giving a warning signal when approaching any object. What is parking sensors in a car and how it functions, read in this publication.

Lada Granta AT ICE-MAN › Logbook › Installing parking sensors

— 4 sensors — control unit — remote screen — leaflet with description — cutter — connecting wires, double-sided tape.

After reading several driver's manuals and consulting in the comments, I decided to install without removing the bumper (although many advise that it is easier to install by removing). The following fastening elements of the rear bumper were unscrewed: - 4 self-tapping screws on top (not useful, extra work - don’t unscrew them) - 3 bolts from below (I highly recommend it to make it more convenient to lay the wires and tie the wires from the sensors into the harnesses with ties) Wires to the interior (trunk ) are inserted through a rubber plug under the left headlight (rear view) through which the factory made an input for illuminating the license plate. squeezed it inside the trunk to make 4 additional holes. I took the included cutter and inserted it into the drill. I pasted a strip of masking tape onto the bumper and marked the drilling points along it:

How to install and connect

You can install parking sensors yourself. The instructions look like this:

• The sensors are placed in the bumper. It is recommended to install 4 sensors front and rear.
• For convenient work, it is recommended to dismantle the front and rear bumpers. Otherwise, you won’t be able to get high-quality holes.
• After dismantling the bumper, masking tape is applied. It is required in order to carry out correct markings and eliminate the possibility of damage to the paintwork.
• The recommended sensor placement height is 50-60 cm above ground level. The optimal distance between individual elements is 1/3 of the length.
• The surface is being marked. This requires measuring instruments and a pencil. The quality of the result depends on the correct marking, so you need to be careful.
• Appropriate holes are required to position the sensors. They can be obtained by drilling when selecting a suitable nozzle. When working, you need to be careful, because a mistake can cause damage to the bumper.
• Once the holes are created, the masking tape is removed and the edges are cleaned. To do this, you can use a knife and needle files.
• The wire passing through to connect the sensor is lowered into the hole. It is placed so that it is slightly recessed into the hole. If necessary, you can press on the sensor ears with a sharp object; a tight fit ensures long-term operation.
• All sensors must be positioned strictly horizontally. Many manufacturers mark the housing with a corresponding arrow, which simplifies installation. If the device is pointed at the ground, it can be triggered by the ground. Fastening is carried out using special glue and silicone.
• Secure the control unit in the luggage compartment. It is recommended to create a special sealed box for it, which will protect the main elements from environmental influences. The wires are routed through a standard rubber seal; additional insulation is provided to eliminate the possibility of damage.
• From the front bumper the wires are routed backwards. To do this, they are located under the casing or plastic protection.

After this, the bumper is installed in place and the entire system is tested. The instructions are as follows:

• Maneuvering is carried out in the courtyard; it is not recommended to immediately drive onto a public road.
• The vehicle should be approached at different angles towards obstacles. Mistakes made can cause dead zones to appear.
• When the system is activated, you should stop the car and check the distance.

At first, you have to get used to the way the parking sensors work. When installing it yourself, you have the opportunity to carry out subsequent repairs and maintenance.

Malfunctions and their elimination

Most often the problem is poor contact. High humidity causes corrosion. Repair consists of removing the oxide mechanically. If the integrity of the main elements is damaged, they will have to be replaced.

source

Parktronic with camera

However, don't rely on the display and camera alone. For maximum safety, it is recommended to use all means. Using a camera, you can notice everything on the way, because in inexpensive systems without it, sensors do not respond to small animals. For example, dogs or cats. It also allows you to see without blind spots and is more weather resistant.

This wireless parking sensor with a rear view camera has proven itself to be excellent when working with heavy vehicles. If the sensors somewhere do not respond correctly, then the obstacle can be seen on the display in time.

Manufacturers are ready to offer drivers a lot of devices.

Wireless devices

The modern market offers many devices. The most popular product is wireless parking sensors with a rear view camera. It is often purchased by novice drivers who do not yet know how to confidently move along the road in traffic.

Like wired devices, wireless systems are designed to make parking as easy as possible. The system will warn the driver in advance about an obstacle behind. Some models implement this warning differently. Some devices have a display for this purpose; on cheaper and more accessible models, the warning is implemented through a simple sound signal. In some models, the signal is sent by voice. So, speaking parking sensors in the purest Russian language, instead of a beeping signal, they will tell the driver how many meters to the obstacle, and will warn when to stop.

Among the advantages that wireless devices have are ease of installation, no problems with pulling wires, comfort during use, and the small space that the device takes up.

The system operates thanks to the control unit. It processes radio signals and can output to a screen. The signals from different devices are different, but do not be afraid - they do not interfere with each other.

The display is connected to the on-board network, and can be installed anywhere in the car interior. This inexpensive parking sensor is suitable for many brands of cars. These models can also be used on trucks.

What to replace with

If the car is not equipped with a device to simplify maneuvering during parking, you can install parking sensors on the Lada Granta liftback yourself.

There are a large number of different devices available in Chinese online stores.

The main selection criteria are:

• Sensing distance range. In most cases 0.3-2 m.
• The voltage required to power the device is 9-12 V. Therefore, power can be supplied from various electrical elements of the vehicle.
• Operating temperature (varies within -35…+45°C).
• Sound signal with volume up to 80 dB.
• The presence of a housing with protection from environmental influences.
• Installing a display that shows the location of the sensor.

The Chinese Myhung driver can be downloaded on the Internet and is also included in the package.

Parking assistant

Parking assistants are the most advanced systems that allow you to park your car. Their essence boils down to the fact that the car itself controls the rotation of the steering wheel when parking. The driver can only press the gas and brake pedals. The choice of trajectory is completely taken over by the car.

Parking assistants include front and rear parking sensors. It is on the basis of their signals that the car first selects a space that is sufficient for parking, and then controls the rotation of the steering wheel.

These systems can perform parallel and perpendicular parking, as well as independently move out of a parking space. The driver only needs to choose the speed.

Parking using the parking assistant system . In this case, it is better to park the car in reverse. The car still parks itself, and when leaving the front the visibility is better.