A letter from a resident of the village was published on the website of the “Let Them Talk” program. Karsnun Olga Postnikova. According to the woman, her husband is accused of murdering the Petrov brothers, whose bodies were found in the Sura River on June 1. In her appeal, Postnikova assures that during the search of the house, detectives planted a package similar to the one in which the corpses of the businessmen were wrapped. The man is then allegedly taken to the prison, a bag is put over his head, he is beaten and forced to leave his fingerprints. The suspect is currently in jail. The woman declares: her husband did not kill anyone, they are trying to plant a package with a knife in the cafe she owns, and the investigator is influencing the court.
Let us remember that the brothers Alexey and Denis Petrov owned a ritual business; in Karsun they were going to open the production of monuments. On January 9, the young people left for work and disappeared under unclear circumstances. Volunteers and law enforcement officers joined the search for entrepreneurs. A few days later, a Nissan X-Trail car was found in the Inzensky district, in which they left.
The brothers' bodies were discovered in early June at the bottom of the Sura River. 6-8 stab wounds were found on the body of one of them, and gunshot wounds on the bodies of both. Also on one of the corpses there was a transfer case from a UAZ car, the second corpse was tied with an industrial cable with an industrial electric motor attached to it.
The woman who applied to the “Let Them Talk” program reports that she is an individual entrepreneur in the field of funeral services and also owns a cafe. Last fall, the Petrov brothers came to her and her husband to set up the production of tombstones.
“The investigation accuses my husband, Dmitry Postnikov, because he allegedly has a motive, although they were not involved in funeral services,” writes Postnikova. — On June 3, they came to search my husband and found a package allegedly similar to the one in which the corpses were wrapped. The package was planted by local operas. The search was carried out without witnesses and without video recording, with violations of all rules. The husband is detained and taken away in a black jeep to the city of Ulyanovsk. On the way to the city, he is transferred from a jeep to a gray Priora and taken to the gate, put a bag over his head and beaten for 30 minutes, while forcing him to touch some kind of sticky bag or tape. I suspect so that his prints remain on the package. Then they bring you to the investigative department and, without providing a lawyer, begin to interrogate you, without giving you the opportunity to make one call. Detained for 48 hours without presenting evidence. He was placed in a temporary detention facility, where he was systematically beaten, forcing him to confess. The beatings have been removed. After 48 hours, investigator Khutarev went to court with a petition for a preventive measure to take my husband into custody, although there were no grounds for this, but the judge of the Leninsky District Court of the city of Ulyanovsk did not stop it. He imposed a preventive measure of detention for a period of 2 months. The lawyer filed an appeal with the regional court, the prosecutor also could not provide evidence of my husband’s involvement in the murder, but the court left the preventive measure unchanged. We changed two lawyers because I had the impression that investigator Khutarev was influencing them and the court. One lawyer initially took the case, and then refused after talking with the investigator. To this day, the man sits in a pre-trial detention center. On June 18, two times unknown people in a car with fake license plates tried to enter the cafe as visitors and plant a package with a knife, as 2 witnesses can confirm. My husband did not kill anyone and did not organize murders. Why laws do not apply to servants of the law. I ask you to help me understand this matter, since I don’t know who to turn to for help against werewolves in uniform.”
If you find an error, please select a piece of text and press Ctrl+Enter.
How to choose the right model
First of all, we became better acquainted with the mechanical engineering industry, learned what the main parts and components of a car are made of. We looked at pictures and many photographs before choosing a suitable model, which we decided to sketch.
And this is where the fun began. To draw someone alive, we always study his character, characteristics and habits. But the car is not alive. Does he have something that makes him different? And as it turned out, there is! And features, and even character. These two points can easily include the capabilities that the designers have endowed their equipment with. Namely, speed, technical issues, appearance and interior comfort.
We learned that the cars themselves are different:
- Passenger cars, such as sports cars, limousines, family cars, sedans, minivans, coupes, station wagons, hatchbacks, etc.;
- Freight vehicles (refrigerators, trucks, dump trucks);
- Buses;
- Special. For example, truck cranes or firefighters.
And since we decided to draw a cool car, we researched different models, taking into account that its speed and maneuverability were at their best, and that it looked decent. And our choice fell on a sports car.
Wheels
We are finishing the wheels, the arches for which already exist. In the arches we draw two semicircles, one, which is smaller, inside the other. And another circle in the center. Literally two lines help to achieve volume in the tires.
Since the car is depicted in motion, we add some touches on the wheels.
How to draw a Priora without cool, fashionable wheels? This is impossible! Circles of different diameters will allow you to achieve the desired effect. It is not necessary to make them stamped; you can draw regular disks or any others.
At the final stage, remove all the extra lines that were there at the beginning, and outline the main ones more brightly.
If you only have a pencil at hand, then the work is ready, but if you have pens or paints, it is better to add color to the drawing.
Now you know how to draw a Lada Priora car step by step. Having learned how to depict the rear view, begin to study the front. See more photos and draw.
Lada Priora belongs to the family of domestic passenger cars; the manufacturer is AvtoVAZ OJSC. In April 2007, sales of this model began. A little later, they began to produce this model with a hatchback body. And in 2009, production of this model began in a station wagon modification.
In the future, it is planned to change the appearance of the front bumper, the exterior mirrors with side turn indicators will be replaced, and additional options will be added. They also recently began producing this model with an automatic transmission.
In addition, on the basis of the Lada Priora, it is planned to create electric vehicles, which will appear in small quantities in the near future. Lada Priora makes it clear to the consumer that domestic cars can be presentable, just like foreign cars.
How to draw a vase
Each of us in our lives has had something to do with VAZ cars, but few people know how these cars appeared and why they are interesting. For many, they are commonplace, an integral part of road traffic in all corners of the former USSR.
We have also heard that the first models were created on the basis of Fiat, but are you familiar with the fact that the famous “nine” was designed by Porsche designers? And what do Niva cars drive in 100 countries around the world? And that this same “Niva” rose to a height of more than 5000 meters above sea level?
Many people still wonder why the same cars are called by different names - “Zhiguli”, “Lada”. It turns out that the name “Lada” was invented for export, while foreigners use the word “Zhiguli”. So love our cars, be interested in the history of the company whose cars we have been driving since 1970!
In this lesson I will show you how to correctly draw a VAZ car models 2114, 2109, 2106, 2107 in a step-by-step manner and with a simple pencil for novice users.
Easy drawings
Here is the simplest option for how to draw cars. These pictures for beginning artists will help you take the first steps on the path to perfection.
How to draw individual elements
In addition to the question of how to draw a “Priora”, another one is appropriate: how to depict the “Lada Priora” badge. The car logo must be present in the drawing, so learning how to draw it will be useful.
New Lada: Farewell, Lada Priora: history of the model towards the end of production. | Reviews | Articles
The first step is to draw an oval. Then we draw another oval inside the oval, and another one inside it. Using a ruler, we draw straight lines, thereby dividing the ovals into equal parts. Then we begin to depict the icon itself. Once the logo has appeared, you can remove the auxiliary lines!
As you can see, drawing the “Lada Priora” BPAN is not difficult!
Video lessons
The domestic car Lada Priora is a very popular car, according to young people, and is not inferior to foreign cars of the same price segment. Fans of Lada Priora literally live by this car, travel to meetings with owners of similar cars and exchange tuning tips. Questions constantly arise about how to draw a Priora bpan on landing with a pencil step by step and how to do it easily or whether you need to have artistic skills to complete the drawing. This is not at all necessary; as it turns out, you can make a beautiful picture with your own hands without special preparation. The instructions offered by the group “how to draw a car” will help you with this, here it is.
How to draw a fire truck
Modern fire engines are significantly different from those that first appeared in 1904. The old cars could accommodate 10 people and practically nothing of fire equipment. But modern models are so spacious that they have plenty of fire extinguishing equipment built into them.
- We draw three parallel horizontal lines, which we divide in half with one vertical line.
The next way to draw a special equipment car will be interesting even for those guys who are not very good at drawing.
- Draw a rectangle and divide it vertically in half.
— online training
Even in ancient times, people got tired of walking on their own two feet and began to tame various large animals for riding.
It all started with an ordinary donkey and an extraordinary horse, but after the wheel came from deep space and man tamed it, everything changed. The horses were used for sausage, and the wheels were taken in pairs and, together with boards of various configurations, carts were created. Today we will move much further and learn how to draw a Lada Priora. Lada Priora is a non-working transformer produced by VAZ, with a half-life of no more than one year. Most often it moves on four wheels, if it moves at all. At first, the Lada was conceived as a Soviet radio operator-spy, introduced into the German rear, but due to small government orders it had to be melted down into a car, so it looks very bad. Most often, to save kinetic energy, of the possible four doors, only the driver's door opens, and the hood is equipped with an automatic mechanism that opens only after an engine breakdown. The external resemblance of the Lada to automobile transport is so strong that an honest Russian person does not think twice about buying it, and the chemical compounds released in the cabin make him love the Lada and encourage it in every possible way.
What can you do with Lada:
- You can turn the vehicle into a monoblock with one door at the back. This way you will save on door handles, side windows and strengthen the body;
- If you are a bachelor, you can remove all the seats except the driver's. This way you will increase the space inside the car and be able to transport 3 times more weight in the cabin, or one whole live cow;
- By removing the roof, you can easily turn your Priora into a bathtub on wheels;
- With the help of an invisible cord, you can move even without gasoline if you tie the car to another vehicle;
- In the film Transformers, Lada and other VAZ products were not used due to the uncertainty of whether this device belongs to vehicles;
- In American films, Priora will never explode unless there is a bear in a hat with earflaps inside it.
And now you yourself will try to draw this car with a pencil.
How to draw Priora Bpan
We will draw a car with a lowered suspension, Priora BPAN, focusing on the rear of the car. We draw the already familiar silhouette without auxiliary lines, using a hard pencil.
Focusing on the low ground clearance, we draw in the details and carry out the drawing in a spectacular black and white color combination.
We invite you to look at the drawings of Priora BPAN, made by different authors. Perhaps you will take note of someone's artistic discovery.
Popular drawings
Look at popular drawings of the car. Here are the most fashionable models that become the target of different artists every day. If the cars are good, their drawings will also look very presentable.
How to draw a Priora with a pencil
Let's make a pencil drawing of the priors in profile. Let's show off her swift silhouette and clear lines.
Using a hard pencil leaving thin lines, we draw the area on the sheet where the drawing will be in the form of a rectangle consisting of 4 squares. Divide each square in half with a horizontal line. Based on this drawing, it will be easier for us to maintain the proportions of the car.
Let's start drawing the lines of the body, showing the doors, roof, front and rear bumpers.
Having removed the thin contours of our auxiliary markings with an eraser, we add wheels, door handles, thresholds to the drawing, making all the lines clear using a soft pencil.
Drawing and back
Now the stage of drawing the rear wing with the door begins. We start with the arch of the future wheel, drawing it according to the same principle as the arch of the front one. We outline the straight line that we still have from the first stage. We schematically show the lines of the bumper.
Here it becomes clear that the algorithm for how to draw a Priora is simple. If at first everything somehow didn’t fit, you had to erase and redraw, but with the roof everything is much easier. We sketch the roof lines and mark the windows.
Let's start creating the trunk and body. Draw the existing lines and add some elements. Make the headlights LED, which means that there is an oval and a circle inside the shape. Draw a place for the license plate; it should look like a parallelogram with the edges rounded at the bottom.
Now we complement the lower part of the rear bumper with additional lines and details.
How to draw a Priora with a pencil step by step
Lada Priora is a very popular car among our Russian motorists. It is in no way inferior to cool foreign cars. This car is produced at . It was created on the basis of the previous car of the same plant, VAZ-2110. Only car designers worked hard and made many changes that improved this outdated car and eventually the Lada Priora was born. Many people want to learn how to draw this car. Here we will draw the Lada Priora with a pencil step by step, and then paint it. Our car is slightly embellished. The body is lowered slightly and the windows are tinted. So let's get started!
Stage 1. First we draw sketches of the lines of the future Lada Priora. Two lines parallel to each other at the top of a sheet of paper. One straight line down. Between them are two curves on one side of the sheet. Two curves on the other side, connected by a convex line downwards.
Stage 2. We begin to draw the front wing. See how this is done in a larger view. Let's draw the outline of the wing, it is slightly curved. Below it we designate in the form of an arch a recess in the body for the front wheel. We make this arch a double line.
Stage 3. Now we draw the middle lower part of the body. This is where the front door is located. We draw straight lines at the bottom and two convex lines from the wheel - the place of the door.
Stage 4. Here you need to draw the location of the rear door and the rear fender. We draw one straight line running parallel to the lower part of the body. Then we show the arch above the rear wheel and outline one line of the rear bumper.
Stage 5. Draw the roof of the car. The lines of the front and middle windows extend down from the roof. At the rear we show the sloping rear window.
Step 6. Let's point out some small parts of the machine. This is, for example, the front mirror. It is mounted near the front window and from there the driver sees everything that is happening behind the car. See how to draw it in a larger view. This is a small rectangle, almost a square, attached to a special holder.
Stage 7. Draw the rear part of the body. There is a trunk where you can put various items you need on the road. Headlights (small circles and ovals) should be placed along its edges. And at the bottom of this part, the car numbers are indicated on a special plate.
Stage 8. Now we need to show the rear bumper. This is the lower part at the rear, protruding slightly forward from the overall body of the car. A small rectangle on the bumper shows a reflective element.
Stage 9. It's time to draw the wheels of our Lada Priora. We draw semicircles under the arches, do this with double lines and show the thickness of the wheel with additional lines.
Stage 10. Draw several strokes on each wheel. On the tires and in the center.
Stage 11. Here between these lines you need to draw various small circles, larger and smaller in size, as well as protruding elements in the center. So we showed cool alloy wheels on the wheels of the Lada Priora.
Stage 12. This is what the black and white version of our car looks like.
Stage 13. Color the Lada Priora. We chose the color “Port Wine” for it. The car windows are heavily tinted. Wheels are gray.
SIMILAR LESSONS
Outline and front part
The first step is to create a sketch. Using light pressure from the pencil onto the paper, draw two parallel, slightly inclined lines and one at the bottom. Two curves pass through them on the left side, and on the right there are similar curves below. Between the latter there is another segment (similar to the letter “n”).
Now we proceed to a detailed analysis of the front wing. We make one of the contours clearer. We finish drawing the front, door handle and wheel arch. The lines should be smooth and curved so that the image does not look flat.
We add clarity to the middle side part of the front. Add lines at the bottom showing that the car is in motion.
The picture is becoming more and more like the real thing. We are drawing the details of the car. Draw the front mirror, but you can't do it with a simple rectangle, as the picture will turn out flat. Sketch out the shape of a parallelogram, proceed from it, drawing out the mount to the car and the sides; on the left side they should be larger.
How to draw a Lada Priora step by step
Stage 1 Despite the smoothness of the lines, we will start working on the image with straight lines that form the silhouette of the car body. The location of the car in the picture is a 3/4 turn. This good angle makes it possible to examine the details without losing the integrity of the image.
Stage 2 Having received the basis for the drawing, we move on to a more clear outline of the outline: we draw the hood, wheel arches, the bottom of the bumper, a smooth transition of the rear pillar. This smoothness is a new feature compared to the “ten”. We apply the radiator grille, headlights, entire bumper, side and front windows, mirror, wheels.
Stage 3 We mark all the small parts: windshield wipers, wheels, lights.
New Lada: Hood deflector VORON GLASS mukh0325: photo, price, description, applicability. Buy in the Autodok online store
Stage 4C of the sketch: we remove the lines of the draft base, check all the contours, make them clearer.
Stage 5: Draw in color. Giving the image volume, we lighten the convex parts of the car body.
Useful Tricks
What to do if you really want to make a drawing, but you don’t have enough skills?
You can use some tips that will allow you to find a compromise between desires and capabilities.
- Use a ready-made diagram, that is, coloring. In fact, this is in no way a compromise on oneself creatively, but rather a thoughtful and careful approach to working with what is not a professional (or even semi-professional) skill.
Drawing a car with paints
If you plan to paint the picture with paints, then it is better to take a watercolor sheet of paper - this way the strokes will be smoother and more beautiful. Otherwise, recommendations for making a drawing in paints will be as follows:
- you need to fill the contours with color only after the pencil base has been completely completed;
- before coloring, erase all auxiliary lines - they will interfere;
- if, in addition to the car, there are other elements in the drawing, then it is better to start with large details of the environment (roads, trees on the side of the road), but it is better to leave those objects that are in the background for last.
Drawing a Priora hatchback
Now let's depict a Priora with a different body type - a hatchback, with a shortened rear overhang. The model is slightly shorter than the sedan and, almost imperceptibly to the eye, taller.
The lines of the front part are familiar to us; we pay attention to the sides of the body, which, as experts say, look especially impressive. Slowly, carefully draw all the lines first with a hard pencil, then highlight them with a soft one. Only after the pencil sketch is perfected do we move on to adding color.
When drawing a Priora hatchback with pencil or gouache, we try to convey its passionate, sporty character in the image.
| : 46325 | Tags: |
