Acoustic shelf
We chose a sunny, warm day with a friend and, having purchased the necessary tools, began. Tools:
I note that gluing with vibroplast is simply a necessary measure, the rear shelf is made of iron 0.2-0.3 mm thick, when you touch it it just rings loudly and vibrates. After gluing it became hard and dull. They began to try on the shelf, it stood up without problems, but they encountered a well-known problem - the original holes are 18 and are located slightly to the side, they measured out the ovals from below and, having taken a beer, decided to cut with a Bulgarian, first they covered the glass with cardboard (there the tint film could burn out), and the bottom with thick blankets. Bulgarian
After struggling for about 20 minutes, we realized there was a lot of noise, fire, metal shavings, but there was little use:((We decided to go and get a jigsaw from our friends who installed music. Things went smoother and faster. And the tools in the garage really helped:))
Hole BEFORE cutting
They cut out the holes, it looked downright scary in real life. We placed the shelf in place and began to attach the “pancakes” in place.
I note that the choice of speakers was different; I was given Herz, Kikx, Macaudio to choose from. For some reason, the choice settled on Kicks. Aluminum diffuser, tweeters powered through a magnet-inner tube. The final
The shelf from below was screwed to the metal shelf with self-tapping screws, nothing rattles. The sound is clear, when cranked almost to maximum, there is almost no distortion, while the front Hertz at 16 wheezes and choke. In principle, I don’t want to install an amplifier; I’m not a fan of additional equipment and wasting money. I listen to music for 4-5 minutes on the way to work and back, and rarely on weekends. In general, it’s normal for me. There are no complaints about the shelf, everything is neat, competent, and does not require any modifications. It was difficult to attach the left and right seat belts, but everything was in place and functional. The middle belt fit into the hole without any problems. Now in the future we will buy two ready-made podiums aimed at the front doors and dynamics standards of 16, maybe like Kicks;) PS Thank you very much to my friend Kos for the real help.
how to remove the rear shelf of a Lada Priora hatchback | Topic author: Svetlana
Mikhail probably used a sledgehammer.
Alexandra Frankly takes out.
installation of an acoustic shelf on a Priora sedan. – YouTube
installation of a Free Air Oriole subwoofer in a Priora sedan shelf – Duration: 16:46. Dmitry Gruzdev 86,222 views · 16:46. Subwoofer in the back.
How to install a lock to open the trunk with a button on the Lada Kalina
Replacing the cabin filter on a Volkswagen Polo sedan video
What kind of oil to fill in the Volkswagen Golf 2 1.3 engine
How to remove the rear parcel shelf on a Priora sedan video: comments
Thanks for your help on this issue. I did not know it.
Of course, I apologize, but this doesn’t quite suit me. Who else can tell me what?
In my opinion, you are wrong. I'm sure. Let's discuss this. Write to me in PM, let's talk.
There's something to it. I see, thank you very much for your help in this matter.
You are making a mistake.
This message is incomparable))), I’m very interested
