Windshield wiper blades for LADA VAZ Priora [2170, 2172] 11.06-07.18

The length of the windshield wipers on the Lada Priora on the driver and passenger sides is 20″ (508 mm), the rear ones are 13″ (330 mm).

Standard sizes of wipers on Lada Priora:

The size of brushes for Lada Priora depends on their location and the type of car body.

Wiper parameters for hatchback and station wagon:

• Length of driver's windshield wipers: 508 mm (20″).
• Passenger wiper length: 508 mm (20″).
• Rear wiper length: 330 mm (13″).

Windshield wiper parameters for a sedan:

• Length of driver's windshield wipers: 508 mm (20″).
• Passenger wiper length: 508 mm (20″).

Important: the rear wiper is not included in the factory equipment of the Lada Priora sedan.

If necessary, the original frame wipers for this Lada model are replaced with alternative sizes - 530 and 510 (mm), 550 and 500 (mm) or 630 and 480 (mm). Increasing the size helps to clean the glass better.

Other names:

The head car of the family of Russian cars of the III group of small class LADA Priora is the VAZ-2170.

Years of production Years of production of all modifications of the model: 2006-2018.

Possible sizes of wipers on the driver's side for Lada Priora of all years of production.

Data in inches.

Possible sizes of wipers on the driver's side for Lada Priora of all years of production.

Data in inches.

Possible sizes of rear wipers for Lada Priora of all years of production.

Possible sizes of wipers on the driver's side for Lada Priora of all years of production.

Data in inches and (mm).

Possible sizes of wipers on the driver's side for Lada Priora of all years of production.

Data in inches and (mm).

Possible sizes of rear wipers for Lada Priora of all years of production.

Data in inches and (mm).

Disclaimer: Although the data represents official manufacturer figures, the information above is for reference only and is not guaranteed to be completely accurate. For cars of the same model manufactured for the USA, Europe and Japan, the size of the wipers may differ.

We choose wipers for the Lada Priora: frameless, frame, hybrid. For every taste and budget: from budget to premium, from trusted manufacturers. Bonus: price comparison and installation video!

Original dimensions of wipers for Lada Priora

Driver's wiper length: 508 mm (20 inches). Passenger wiper length: 508 mm (20″). Fastening type - hook.

This car has running blade sizes and a common fastening, so the choice of windshield wipers for it is quite wide.

In addition, since when cleaning the glass with original-sized wipers, a decent gap remains on the glass, car owners install larger brushes to increase the cleaning area of ​​the windshield. There are different options here: 550 + 500, 530 + 530, 530 + 510, 530 + 500.

What does the length of the brushes affect?

The shape of the front glass is selected based on parameters such as the size of the car and the effect of glass on aerodynamic resistance. Therefore, both the height and width of the glass on cars of different brands and models differ. Therefore, the length of the wiper blades suitable for these cars also differs. After all, the windshield wiper lever is selected in such a way that, when in a completely vertical position, its tip falls at the center of the height of the glass. In this case, properly selected wiper blades run almost flush with the seal at the top and level with the dashboard at the bottom, allowing the blades to clean the area that gives the driver maximum visibility.

Quick comparison

I offer brief recommendations for wipers. Choose what is more important to you and buy. A detailed description, installation video and price comparison are below.

Frameless windshield wipers for Priora

Of the frameless kits, I would probably immediately recommend the Bosch Aerotwin Retrofit AR 532 S brushes (article 3397118986). These windshield wipers are recommended by the manufacturer for Priora, and they just have an extended driver blade (530 mm + 500 mm). They are made in Belgium, they are reliable, durable, easy to clean and do not creak. Read more about Bosch Aerotwin.

You can also consider piece brushes from Bosch . You can install a pair of Aerotwin Retrofit AR 20 U 500 mm brushes (article 3397008535). As an option, two Aerotwin Retrofit brushes: AR 21 U and AR 20 U with a length of 530 mm and 500 mm, respectively (article 3397008536 + 3397008535).

Among the more budget-friendly options for frameless brushes, pay attention to the wipers of the Canadian manufacturer Rainblade (article 358356 + 358349) - two brushes 530 and 510 mm.

Removing and disassembling the windshield wiper motor

All the important parts of the rear windshield wiper are located under the trim. To remove it, I had to tinker, since it was attached to special holders, which are not so easy to remove without special tools. Fortunately, I had a nail puller at hand and it was perfect for removing these fasteners.

After unscrewing the rear wiper mount, I unscrewed the mount of the motor itself. I disconnected it from the block and took it home for inspection.

There appears to be no damage. Then he unscrewed the mount of the motor housing and pulled the structure out of it. The mechanism itself is covered in lubricant; there was plenty of it.

I looked at the gears, they were intact. Next, I examined the wires attached to the microcircuit. They had a raid. I thought this was probably the reason and decided to move them a little (in a good way, it would be better to resolder them), the “dust” flew off.

That’s it, there’s nothing more to look at, I put the mechanism back together and went to connect the motor to the wiring block to see if it works or not.

I turn on the ignition and rear window wiper. That's it, the rear wiper is working. Hooray! I screwed everything into place and went for inspection.

Price comparison

For comparison, we took prices from one well-known mass online store. This will reduce the impact of pricing by different companies on cost variation.

Comparison of prices for wipers on Priora

As can be seen from the graph, the most expensive are hybrid Denso. Frameless Bosch and Rainblade are 20-30% cheaper. Frame brushes are noticeably cheaper than frameless brushes.

Wiper design

The main parts of the windshield wiper are the supporting frame and the cleaning element.

The supporting frame is made of metal or plastic. Wipers with a metal frame are more durable and strong. This frame is used to make winter windshield wiper blades.

Wipers with plastic frame

There is another type of brush design - frameless brushes. The frame in such brushes is a cleaning rubber band and the wiper itself is made entirely of rubber.

The cleaning element is made of soft rubber or silicone, which ensures a tight fit to the windshield and excellent cleansing of moisture.

Wiper size and mounting

The size of the windshield wiper blade installed on the Priora is 500 mm or 20 inches, this size is the same for both wipers.

The type of fastening of the wiper is “hook” (HOOK), that is, the end of the metal part of the windshield wiper is bent into a hook on which the blade is fixed.

A rear window wiper is installed on cars with hatchback and station wagon body types. The principle of attaching the rear wiper of the Priora is similar to the front one - “hook”.

The size of the rear wiper blade on the hatchback and station wagon is 330 mm.

HOW WERE THE RESULTS EVALUATED

Technical indicators were assessed by a group of experts on a 5-point scale; these assessments were recorded in the test report. Ratings for the price/quality ratio were also given on a 5-point scale: according to the principle “more is better.” The calculation method is simple: dividing the cost of each product by the number of points scored, the best attitude was given a score of 5 points, and the worst - 1 point. The rest received proportional intermediate grades. Thus, an “excellent” student could ideally receive 5 points for both technical results and optimal pricing policy. The same applies to the outsider, who in both cases was threatened with one.

Choosing a wiper based on weather conditions

Nowadays, there are many different types of wipers. Each of them implies its use in certain conditions. They are divided into two types: summer and winter.

Summer

In the summer, even inexpensive wipers can provide good cleaning of the windshield. Since weather conditions allow the cleaning gum to remain elastic for a long time. Therefore, in the summer, you can use any type of wipers. But frameless ones cope best with large amounts of moisture on glass; they have a more expensive price compared to their competitors.

The cost of frameless wipers starts from 300 rubles per piece.

The cost of frame brushes is from 100 rubles per piece.

Winter

In winter, at low temperatures, snow or ice frozen on the windshield begins to melt and drain when the heater operates in the cabin. This greatly interferes with visibility; ordinary windshield wipers are not able to cope with this task, since their rubber band will “stiffen” at low temperatures and will not press tightly against the windshield.

Winter glass cleaners are able to remain flexible during low temperatures. These wipers are framed and have frame protection from snow and ice getting into them.

The cost of winter wipers starts from 500 rubles per piece.

In winter, the use of frameless wipers is not advisable because when brushing a large amount of snow off the glass, such a brush is more likely to be damaged.

Types of wiper blades

How to choose the right size of windshield wipers according to the grant without compromising their quality?

Car wiper blades can be divided into the following categories:

1. Frame wipers are the most common and “ancient” type of wipers. The design of this product is a thin metal plate on which a rubber strip is securely attached.

Types of frames: a – four-support (three rocker arms); b – six-support (five rocker arms); c – eight-support (seven rocker arms); 1 – rocker arms; 2 – clamp (support); 3 – adapter; 4 – tape; 5 – hinge.

The main advantage of such a product is its low cost and uniform fit of the brush to the windshield. The disadvantages of this design are its fragility. Over time, the fastening becomes loose and the rubber strip separates from the guide plate.

This type of windshield wiper is less suitable for winter use.

2. Frameless - in such products there is no metal frame, and the brush is a rubber-plastic plate that can be installed on the lever of almost any car.

Included with this product is an adapter, with which you will not have any difficulties installing the windshield wiper on both foreign and domestic cars.

Frameless model with built-in spoiler

Frameless products are great for winter use. Ice, snow or rain cannot reduce the efficiency of wipers of this design.

Frameless windshield wipers do an excellent job in the summer, so after winter use there is no need to replace them with products of a different design.

3. Winter - a frame type of windshield wipers, in which the working surface is packed in a protective cover. Additional protection allows the wiper to operate effectively by preventing the icing process even after heavy rain with a subsequent decrease in air temperature.

Winter model with rubber cover

The main disadvantage of wipers of this design is the high aerodynamic resistance, due to which such blades begin to vibrate on the windshield at high speeds. For this reason, it is recommended to replace them as soon as the danger of spring frosts has passed.

4. Hybrids are the best for winter use. The design of hybrid windshield wipers has good aerodynamic performance, no freezing and insufficient contact with the surface of the windshield.

The only drawback of such products is their high cost, but given the increased wear resistance and all-season use, you can spend a little more money on purchasing high-quality wipers for your car.

5. In addition to the listed models of windshield wipers for winter use, you can install heated wipers.

Replacement

Replacement should only be carried out with the hood closed, otherwise the wiper will not rise.

With the wiper raised, pull the wiper blade down with controlled force. After which the brush will be removed.

If the wipers have not been changed for a long time, then it is necessary to apply quite a bit of force, since the debris and dirt accumulated over the period of operation acted as “glue” and firmly fixed the brush in its seat.

Before installing a new brush, it is necessary to clean the surface of the hook from rust.

Installing a new brush is done by inserting the brush into the wiper hook.

The wiper blade replacement process is complete.

Literally every little detail affects the safety of driving a vehicle. For example, even the size of the wipers of a Lada Priora car, which are designed to clean windows in rainy weather or during snowfall, is of great importance. If you select these parts incorrectly, uncleaned areas will appear on the glass, due to which you risk not noticing another car or pedestrian, or getting into a traffic accident.

Standard size of wipers for Lada Priora

The standard equipment of the Priora comes with standard windshield wipers, the size of the blades is:

• on the right and left wipers of the Lada Priora sedan - 508 millimeters;
• on the rear windshield wiper, which is used in station wagon or hatchback cars, - 330 millimeters.

The standard windshield wipers of all Priora models work quite well, but many car enthusiasts are dissatisfied with the area that does not clear and remains right in the center during snowfall or heavy rain. To fix this problem, they install an extended length windshield wiper. If you are interested in this possibility, the maximum dimensions of the wipers will be as follows:

• 630 millimeters for a brush located on the driver’s side of the vehicle;
• 480 millimeters for the wiper on the passenger side of the windshield.

You can also vary this parameter, install wipers with lengths of 53 and 51, 55 and 50, 53 and 53, 53 and 50 centimeters, respectively.

what are the reasons and how to fix it?

Trunk volume and other features of the Lada Priora. Lada Priora station wagon trunk size. Lada Priora station wagon dimensions

Often those who have this car notice that the wipers on the Prior work too slowly, as a result of which visibility deteriorates. This problem is especially typical in winter, when the windows become heavily fogged and covered with snow. Because of this, visibility is greatly reduced, which can lead to dire consequences. To prevent this from happening, you need to repair your wipers on time. However, first it is advisable to understand the cause of the malfunction.

Why windshield wipers do not work well: reasons and solutions

If you notice that the washers on your car are not working well, you need to immediately find out the cause of this problem. Often this is:

• lack of lubrication;
• increasing the resistance to movement of brushes in the hinges;
• collector contamination.

Everything can be solved if you approach the procedure correctly. In the first case, it is necessary to choose a solution as a lubricant that does not thicken at high temperatures. If the lubricant does not help, you will have to use a modification. Lada Priora windshield wipers consist of many connections and contacts that create additional resistance, as a result of which the motor power decreases. You can minimize current loss using the following tools:

• 5-pin connector;
• three 5-pin relays with socket;
• wires 25 mm;
• round terminals.

Types of windshield wipers installed on Priora

To improve the efficiency of their windshield wipers, many drivers experiment not only with the sizes, but also with the types of these devices. Today on the market you can find the following types of wipers that are quite suitable for installation on the Lada Priora:

• ordinary classic products in which the brush is securely and firmly attached to a special aluminum or plastic frame. If you are looking for the most durable solution, we can recommend purchasing models such as the Bosch Twin 500 (more expensive option) or Bosch Eco 500 C (ideal solution for those who want to save money and get quality products);
• frameless wipers. According to many car enthusiasts, they clean the glass much better, without leaving dirt on it, and also last much longer. The most common models are the Bosch Aerotwin Retrofit AR 532 S or available products from the Canadian brand RainB. The dimensions of frameless windshield wipers are the same - 53 and 51, 53 and 50 centimeters for the windshield and 500-510 millimeters for the rear window;
• hybrid wipers. They are manufactured by the South Korean manufacturer Denso and differ from conventional ones by the presence of a higher quality frame that fits tightly to the surface to be cleaned. Thanks to this, the efficiency of the devices increases significantly. The length of such windshield wipers is 50 centimeters on the driver and passenger sides.

In addition, you can purchase piece brushes from the same manufacturers and install them, for example, on a standard frame.

As you can see, the correct selection of wipers for your Lada Priora car will help you not only solve all problems with glass contamination and the appearance of uncleaned areas on it in inclement weather, but will also provide the opportunity to increase the efficiency of the windshield wipers and improve their appearance. In addition, many models of modern devices from the world's best manufacturers last much longer than standard products.

Brush sizes

• according to the technical manual, the size of the driver's wiper is 600 mm;
• The size of the passenger cleaner is 410 mm.

Heater damper lada priora 2170 2170 sedan

Alternatively, you can use longer windshield wipers:

1. On the passenger side, you can install a longer wiper, its size should be no more than 450 mm, this will allow it to engage a larger amount of surface.
2. As for the driver's brush, it is better not to experiment here. For example, if you install a 610 mm wiper, this will cause it to touch the car body during operation, and accordingly, a knock will appear (video author - TheLadaKalina 2).

*prices are as of September 17, 2018.

The given prices are for budget components; when purchasing products from famous brands, the cost increases.

The standard size of the Lada-Grant windshield wipers on the windshield, which is indicated in the instruction manual, is 60 cm on the driver’s side and 41 cm on the passenger’s side. At the same time, on the left (driver's side) the maximum size of the brushes is indicated. If you set it even 1 cm more, the wipers will knock and fail faster. On the right passenger side it is possible to increase the length of the brushes. The maximum length in this case will be 45 cm.

Most often, when replacing, drivers prefer to choose a longer wiper on the passenger side as it cleans the windshield better. The price in this case differs slightly.

Read more: Description of window regulators on Chevrolet Lanos and other models, repair and replacement

Motorists approach the issue of selecting wipers for Lada individually. Some people don’t like blades that are too long, while others, on the contrary, are sure that the more area the windshield is cleaned, the better.

Most often, frameless wipers “Lada-Grants” are offered with a size of 60 x 45 cm. They are easy to use and have a longer service life.

The cheapest option is the frame brushes that come with a new car, but they don’t last long.

How to understand that the length of the wipers is chosen incorrectly:

• The glass is difficult to clean even after prolonged operation of the wipers. Ideally, the brush should clean the windshield in an average of three passes over it. The quality of cleaning decreases when the wiper is not pressed tightly against the glass.
• During operation, the brush touches the rubber seal on the windshield and cleans in stripes.
• During operation, the wipers (right and left) touch each other and slow down movement, and accordingly affect the driver’s viewing angle. This indicates that the wiper blades are too long. Sometimes long brushes can even touch the driver's door, which is accompanied by a knock.
• Wipers that are too small clean a small area of ​​the windshield, reducing visibility through it, especially on the driver's side.

The length of the driver's windshield wiper is 600 mm. The length of the passenger wiper is 410 mm. The type of fastening is “hook” (hook in English).

Foreign manufacturers indicate the length of the windshield wiper in inches, so the suitable length for a passenger blade is 16″. Sixteen inches - 406 mm, probably because of this, brushes with lengths of both 40 and 41 cm can be installed on the right side of the Granta. If desired, you can install a passenger windshield wiper up to 45 cm, but I would recommend staying in the range of 400...410 mm.

I have added brush article numbers to the selection: they will help you find specific products in stores that sell auto parts (this is faster and, most likely, cheaper). Also, the articles will allow you to avoid compromises in the form of several centimeters in the length of the brushes - choose only what is made specifically for your car.