Windshield wiper blades lada x-ray 2015-2018: sizes and articles

Ready-made kits Formed kits Rear wiper

Windshield wipers Bosch AeroTwin A868S
  • Wiper type: Frameless
  • Driver's wiper, cm: 65
  • Passenger wiper, cm: 34
  • Mount type: 7

Windshield wipers SWF VisioFlex 119269

  1. Wiper type: Frameless
  2. Driver's wiper, cm: 65
  3. Passenger wiper, cm: 34
  4. Mount type: 7

Windshield wipers Valeo Silencio X-TRM VM383

  • Wiper type: Frameless
  • Driver's wiper, cm: 65
  • Passenger wiper, cm: 34
  • Mount type: 7
Windshield wiper Bosch AeroTwin Plus AP650U+Windshield wiper Bosch AeroTwin Plus AP340U
  1. Manufacturer: Bosch
  2. Wiper type: Frameless
  3. Mounting type: 234578
  4. Driver length. wiper, cm: 65

Driver's part number wiper, cm: 3397006952 Passenger length. wiper, cm: 34 Article passage. wiper: 3397006941 Champion Easyvision Multi-Clip EF65 windshield wiper + Champion Easyvision Multi-Clip EF35 windshield wiper

  • Manufacturer: Champion
  • Wiper type: Frameless
  • Mounting type: 234578
  • Driver length. wiper, cm: 65

Driver's part number wiper, cm: EF65/B01 Passenger length. wiper, cm: 35 Article number passage. wiper: EF35/B01 Trico ExactFit EFB6514L windshield wiper + Trico ExactFit EFB3514L windshield wiper

  1. Manufacturer: Trico
  2. Wiper type: Frameless
  3. Mount type: 7
  4. Driver length. wiper, cm: 65

Driver's part number wiper, cm: EFB6514L Passenger length. wiper, cm: 35 Article number passage. wiper: EFB3514L Windshield wiper Valeo First Multiconnection VFB65 + Windshield wiper Valeo First Multiconnection VFB35

  • Manufacturer: Valeo
  • Wiper type: Frameless
  • Mounting type: 12347
  • Driver length. wiper, cm: 65

Driver's part number wiper, cm: 575789 Passenger length. wiper, cm: 35 Article number passage. wiper: 575780

Rear windshield wiper Bosch AeroTwin A280H
  1. Manufacturer: Bosch
  2. Wiper type: Rear
  3. Mount type: 11
  4. Wiper length, cm: 28

Wiper article, cm: 3397008005 Rear windshield wiper Champion Aerovantage Flat AF28

  • Manufacturer: Champion
  • Wiper type: Rear
  • Mount type: 11
  • Wiper length, cm: 28

Wiper article, cm: AF28/B01 Rear wiper Denso Rear DRB-028

  1. Manufacturer: Denso
  2. Wiper type: Rear
  3. Mount type: 11
  4. Wiper length, cm: 28

Wiper article, see: DRB-028 Rear wiper SWF Original 116116

  • Manufacturer: SWF
  • Wiper type: Rear
  • Mount type: 11
  • Wiper length, cm: 28

Wiper article, cm: 116116 Rear wiper Trico ExactFit Rear EF280

  1. Manufacturer: Trico
  2. Wiper type: Rear
  3. Mount type: 11
  4. Wiper length, cm: 28

Wiper article, cm: EF280 Rear windshield wiper Valeo Silencio Standard U28

  • Manufacturer: Valeo
  • Wiper type: Rear
  • Mount type: 11
  • Wiper length, cm: 28

Wiper code, cm: 567765

Source: https://katalogi.top/wiper/42803010708/

Dimensions of Lada X-ray wipers - Size tables

home ⇒ equipment ⇒ wipers ⇒ lada ⇒ lada wipers

The length of standard windshield wipers for Lada Xray cars is 26″ (650 mm) on the driver’s side, 14″ (360 mm) on the passenger’s side, and 16″ (400 mm) on the rear.

The left brush of the 5-door crossover Lada Xray reaches 650 (mm) in length, the right one - 360 (mm). The length of the rear window wiper blade is 400 (mm).

Wiper parameters for crossover:

  • Length of driver's windshield wipers: 650 mm (26″).
  • Passenger wiper length: 360 mm (14″).
  • Rear wiper length: 400 mm (16″).

Important: wipers on Lada Xray have the smallest type of fastening among simple designs - a bayonet lock (Bayonet).

If it is necessary to replace the standard brushes for this model, it is recommended to change only the short passenger 360 (mm) to 380 (mm).

General parameters of Lada X-ray wipers Drawing General view of the windshield wiper blade Driver (in)
Front on the driver's side: Possible sizes of wipers on the driver's side for Lada X-ray of all years of production. Data in inches. Passenger (in) Front on the passenger side: Possible sizes of windshield wipers on the driver's side for Lada X-ray of all years of production. Data in inches. Rear (in) Rear: Possible sizes of rear wipers for Lada X-ray of all years of manufacture.


(drawing of wipers)

26»14»16 »

Size tables for Lada X-ray wipers Year Model year Driver (in) Front driver side: Possible sizes of driver side wipers for Lada X-ray of all years of production. Data in inches and (mm). Passenger (in) Front on the passenger side: Possible sizes of windshield wipers on the driver's side for Lada X-ray of all years of production. Data in inches and (mm). Rear (in) Rear: Possible dimensions of rear wipers for Lada X-ray of all years of production. Data in inches and (mm).

201526" (66 cm)14" (35.6 cm)16" (40.6 cm)
201626" (66 cm)14" (35.6 cm)16" (40.6 cm)
201726" (66 cm)14" (35.6 cm)16" (40.6 cm)
201826" (66 cm)14" (35.6 cm)16" (40.6 cm)
201926" (66 cm)14" (35.6 cm)16" (40.6 cm)

Disclaimer: Although the data represents official manufacturer figures, the information above is for reference only and is not guaranteed to be completely accurate.

Source: https://razmery.info/tehnika/dvorniki/razmery-dvornikov-lada-x-ray.html

Price comparison for original size wipers

For the graph, we took prices from one site - a popular online auto parts store. This will avoid confusion in pricing.


Comparison of prices for wipers on Lada X-Ray

As we can see from the graph, the most inexpensive wipers are Kamoka, Bosch and SVF kits are 30-40% more expensive, piece brushes with a multi-adapter are slightly cheaper than kits.

Wiper blades Lada x rey size

Price for two wipers

Price for two wipers

Bought more than 10 times

Price for two wipers

Rear wiper for Lada [VAZ] XRAY (2015 - 2021)

  • Price for one wiper
  • Wiper blade sizes
  • By courier/pickup on August 5
    and later - free
  • The difference between frame and frameless brushes

  1. Aerodynamics Use all year round
  2. Appearance
  3. Close contact with glass Frame durability
  4. Close contact with glass Use all year round
  5. Aerodynamics
  6. Structure of windshield wiper blades

  • On this page you can choose the model of windshield wiper blades you like most for the Lada [VAZ] XRAY car (2015 - 2021).
  • All presented options have a mount compatible with the selected vehicle and are characterized by high quality workmanship. In order to find out the differences between specific models of wipers, delivery modes, and also ask other questions you are interested in, contact our consultant managers online or call the numbers provided
  • When choosing windshield wipers for Lada XRAY from us:

We guarantee that the wipers will definitely fit the Lada XRAY

We will deliver your order free of charge, within the limits of the courier service.

Every week we give gifts and additional discounts!

Once you place an order, you become our friend. Discounts, bonuses and personal approach for our friends!

The cleanliness of the windshield, and therefore safety on the road, depends on the wiper blades. As a preventative measure, it is recommended to replace brushes at least once a year. Let's look at how long the wipers on the Lada XRAY are and what size is best to replace them with.

Front wipers

Lada XRAY windshield wiper blades have different lengths and, accordingly, different catalog numbers:

  • driver's brush - 650 mm;
  • passenger brush - 360 mm.

Upon closer examination of the front windshield wipers on the Lada XRAY, you will notice that longer blades can be installed.

For example, replace the driver's side with a 700 mm one, and instead of a short 360 mm passenger side, you can install a 400 mm wiper blade ( 70
mm and 400 mm ).
This will increase the windshield cleaning area slightly. The dirty triangle at the bottom of the glass will become smaller, and the clean area at the top will expand. However, in winter, the edge of the wiper on the passenger side will touch the ice on the edge of the glass:

Buttons on the Ford Focus 2 dashboard

  1. Example of installation of brushes 650 mm and 380 mm:

Fastening windshield wiper blades on Lada XRAY, Bayonet arm type (pin). That is, when choosing wipers, make sure that an adapter of this type is included in the kit.

  • Or order the adapter separately, search for “Bayonet Lock Adapter”.

Rear wiper

The standard rear wiper has a size of 300 mm. It can be replaced with a 400mm long brush. This will significantly increase the cleaning area:

What size wipers do you use on the Lada XRAY? Is the standard cleaning area sufficient for safe and comfortable vehicle operation? Take part in the survey, leave your feedback and recommendations. instructions for replacing windshield wipers on Lada XRAY.

Lada X-Ray windshield wipers are manufactured by various companies. The AvtoVAZ plant itself does not produce original parts. This is explained simply - the company purchases products from suppliers. Then it is packed into its own box.

Wipers for Lada X-Ray

The X-Ray car is a relatively young concept. Only one generation was produced in several bodies. Regardless of the year, the length of the brushes, their other parameters are the same for all cars.

The dimensions of the wipers must be observed. Otherwise, operational problems may occur. A brush longer than necessary will touch the body.

Which entails two problems:

ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline! Read more"

  • low degree of windshield cleaning;
  • damage to the paintwork.

Windshield wiper blades come in different sizes. The length on the passenger side is slightly shorter. If you purchase models that are not specifically designed for Lada X-Ray, it is advisable to stock up on a tape measure or ruler. This will avoid purchasing the wrong brushes and then returning them.

On-board computer Lada Priora operating instructions

Dimensions

Another important nuance is choosing the right fastening. On all modifications without exception, regardless of the year of manufacture, the installed motor uses a Bayonet arm type connection method (pin).

Important: before purchasing a suitable wiper, it is important to make sure that the appropriate type of adapter is included in the kit. If you don't have one, you can purchase a special adapter separately.

Standard parameters of X-Ray car brushes

Year of manufacture Generation - body Driver's side Passenger's side Rear Mounting type

From 2015 to presentFirst generation650 mm360 mm400 mm"pin"

Original articles

It should be noted that original wipers are almost no different from products sold by famous brands. It is only important to familiarize yourself with all the parameters of the purchased product. It is necessary to match not only the fastening, but also the length.

Original articles:

Article Type Group

H-380HybridPassenger side
H-650HybridDriver's side

Replacement options

It is not always appropriate to use standard, original components. There may be various reasons for this. Sometimes purely subjective. There are a large number of analogues on the market in the Russian Federation. Sets of pairs 650 mm and 360 mm are not a problem to purchase. All of them are divided into the following categories:

Installation can be carried out on any type of body (sedan, hatchback and others). The length of the brushes is completely the same for all body types without exception.

Frame

Frame brushes are not installed from the factory. Since at high speed they have a low degree of purification due to an unsuccessful aerodynamic shape. Every year, this type of brushes is represented on the shelves less and less.

Name Article No. Characteristics Cost

SWF116520/H301Male connectorFrom 400 rubles

Frameless

Frameless type brushes are installed on the conveyor. They allow you to easily move at speeds of 140 km/h or more. The unique aerodynamic shape avoids strong air resistance. There is no separation of the cleaning surface from the glass. This allows us to achieve a high degree of purification.

Name Article No. Characteristics Cost

Trico Flex FX650+FX350FX650+FX350 – driver and passenger sideMale connectorFrom 2 thousand rubles

Hybrid

Hybrid blades for Lada X-Ray combine all the advantages of the types of wipers discussed above. They are made of a single piece of rubber, but at the same time have a rigid frame. Thanks to this, high speed will not cause a decrease in the degree of cleaning of the windshield. Choosing which is better between frame and frameless ones is quite difficult. Hybrids are a good solution.

Niva Chevrolet crankshaft sensor how to check

Name Article No. Characteristics Cost

Denso HYBRIDDU-035LHybridFrom 600 rubles

Winter

Winter wipers are distinguished by their elasticity - even at sub-zero temperatures they clean the glass well. The main reason for this is the composition of the material used in manufacturing.

Special additives are used that allow the rubber not to change its properties and qualities under the influence of external factors.

Regardless of the time of year, quality winter brushes clean the glass and adhere well to the glass surface.

There are many varieties of this kind of brushes. These are not only ordinary frame ones, but also hybrid and simply frameless ones. Choosing certain ones is more a matter of taste. They all have their advantages and disadvantages. When choosing, you need to take into account the operating conditions of the vehicle.

Name Article No. Characteristics Cost

Trico Ice 60 + 40 cm35-240+35-160Asymmetric spoilerFrom 2.1 thousand rubles

Replacement

The process of replacing brushes on a Lada X-Ray car is simple. But it requires some precision. The reason is the use of non-standard fastening. Most cars today use a hook type connection. The model under consideration is different - a “pin” is used. The replacement algorithm includes the following steps:

  • The windshield wiper blade must be moved to a horizontal position, perpendicular to the windshield;
  • then the plastic clips that secure the brush in its seat should be squeezed on both sides;
  • The yardman is removed from the leash with gentle swaying.

Installing new wipers is done in reverse order. The rear brush installation process is slightly different:

  • the axle is disconnected from the leash - it is necessary to overcome slight resistance, but tugging is not allowed;
  • Next, a new brush is installed - on axis No. 1 in the groove of lever No. 2;
  • press the lever until it clicks - it signals that the installation was successful.

The installation process usually takes no more than 10-15 minutes. It is important to be careful with plastic parts. They break easily.

Source: https://automotogid.ru/shhetki-stekloochistitelja-lada-h-rej-razmer/

Replacement

The process of replacing brushes on a Lada X-Ray car is simple. But it requires some precision. The reason is the use of non-standard fastening. Most cars today use a hook type connection. The model under consideration is different - a “pin” is used. The replacement algorithm includes the following steps:

  • The windshield wiper blade must be moved to a horizontal position, perpendicular to the windshield;
  • then the plastic clips that secure the brush in its seat should be squeezed on both sides;
  • The yardman is removed from the leash with gentle swaying.


Installing new wipers is done in reverse order. The rear brush installation process is slightly different:

  • the axle is disconnected from the leash - it is necessary to overcome slight resistance, but tugging is not allowed;
  • Next, a new brush is installed - on axis No. 1 in the groove of lever No. 2;
  • press the lever until it clicks - it signals that the installation was successful.


The installation process usually takes no more than 10-15 minutes. It is important to be careful with plastic parts. They break easily.

Rear wiper driver with brush assembly Xray

Dear customers, in order to avoid mistakes when sending the rear windshield wiper arm assembly with blade Lada X-Ray / Lada Xray, SANDERO 2014, in the “Comment” line, indicate the front or rear arm, your car model and year of manufacture.

Windshield wiper blades are indispensable assistants for the car owner; they ensure traffic safety and make the trip more comfortable.

As the automobile industry developed, car windshields became larger and their curvature increased.

The length of the windshield wiper blades has increased, they have acquired more “swings” to ensure normal pressure against the glass and have become more bulky.

This negatively affects the aerodynamics and reliability of the structure, impairs visibility and increases noise.

The Lada X Ray / Lada Xray is a relatively young concept. Only one generation was produced in several bodies. Regardless of the year, the length of the brushes, their other parameters are the same for all cars. The dimensions of the wipers must be observed. Otherwise, operational problems may occur. A brush longer than necessary will touch the body.

  • Which entails two problems:
  • — low degree of windshield cleaning;
  • — damage to the paintwork.

Frameless type brushes are installed on the AvtoVAZ conveyor. They allow you to easily move at speeds of 140 km/h or more. The unique aerodynamic shape avoids strong air resistance. There is no separation of the cleaning surface from the glass. This allows us to achieve a high degree of purification.

  1. Lada X-ray / Lada Xray windshield wiper blades have different lengths and, accordingly, different catalog numbers:
  2. driver's brush - 650 mm;
  3. passenger brush - 360 mm;
  4. rear brush - 300 mm.
  5. On all modifications of the Lada X-Ray / Lada Xray, regardless of the year of manufacture, the installed motor uses a Bayonet arm type connection method (pin).

With a detailed study of the front windshield wipers on the Lada X-Ray / Lada Xray, you can install longer blades.

For example, don’t touch the driver’s side, but instead of the short 360 mm passenger side, you can install a 380 mm wiper (650 mm and 380 mm). This will increase the windshield cleaning area slightly.

The dirty triangle at the bottom of the glass will become smaller, and the clean area at the top will expand by 1 cm.

The standard rear wiper 7701066673 has a size of 300 mm. It can be replaced with a 400 mm long brush. This will significantly increase the rear window cleaning area.

The cleanliness of the windshield and rear window, and therefore safety on the road, depends on the wiper blades. As a preventative measure, it is recommended to replace brushes at least once a year.

  • In any weather, windshield wiper blades provide comfortable movement for the driver and passengers: they are all-season.
  • Other articles of the product and its analogues in the catalogs: 7701066672, 7701066673, 287807006R.
  • Lada X Ray / Lada Xray, SANDERO 2014.
  • Any breakdown is not the end of the world, but a completely solvable problem!
  • How to independently replace the wiper and rear windshield wiper arm assembly on a Lada X-Ray / Lada Xray.
  • AvtoAzbuka Internet Store, repair costs will be minimal.

Just COMPARE and BE SURE!!!

Don’t forget to share the information you find with your friends and acquaintances, as they may also need it - just click one of the social networking buttons below

Source: https://avtoazbuka.net/lada-xrey/povodok-steklootchestitelya-zadnij-so-shchetkoj-v-sbore-xray-detail

Dimensions

The driver and passenger side brush lengths are different. The difference is small - only 20 mm. If possible, avoid installing brushes of the same length. Otherwise, a path of water will form in the middle of the windshield during rain. Which will lead to a significant deterioration in visibility. The rear window is equipped with a 300 mm long brush.

The rear hemisphere allows for the installation of a brush 400 mm long. In this case, the lower part of the window will not be affected. But you will have to limit the stroke of the brush on the gearbox. To do this, you need to disassemble the motor that drives the brush.

Year of issueGeneration - bodyDriver sidePassenger sideRearMounting type
1987-20041530 mm510 mm300 mm"hook"

Original articles

It will no longer be possible to find original parts for this car produced by AvtoVAZ.

It is only important to note: in the assortment offered by stores, it will not be difficult to choose a high-quality analogue. In the last years of car production, the manufacturer no longer made brushes independently.

Ready-made solutions were purchased from Bosch.

Original articles used back in the Soviet Union:

vendor codeCar modelGroupPart serial number
21086-52050 – driver’s side 2108-520505 – passenger’s sideVAZ 2109Frame

Replacement options

There are quite a lot of companies involved in the production and sale of various brushes. Including for the VAZ 2109. When choosing, you should give preference to well-established manufacturers

But it is important to remember: there are always many counterfeits of well-known brands. Please inspect the boxes carefully before purchasing.

This will avoid purchasing a fake.

All presented brushes are divided into 4 main categories:

  • frame,
  • frameless,
  • hybrid,
  • winter.

Frame

Designated as classic. They are distinguished by their low price and simple design. The strength of such products is great. But a serious disadvantage is the poor aerodynamic shape. When air resistance occurs when driving at speeds over 100 km/h, the brush rises slightly above the glass surface. Which leads to a decrease in the contact area. Deterioration in the degree of glass cleaning.

Frameless

Brushes of this type do not have the disadvantages of classic models. They have an optimal aerodynamic shape and look aesthetically pleasing. At the same time easy to install. The only negative: low strength. At the same time, the cost is relatively low.

Hybrid

Hybrid – a design that has all the advantages of classic and frameless brushes. Today this is the best option. Low cost, coupled with low aerodynamic resistance and good cleaning properties, makes their use convenient and effective. The brush itself is made of a single piece of rubber. There is a frame inside. Some modifications are equipped with a spoiler. Which makes the brush even more streamlined.

Winter

Winter wipers are distinguished by their elasticity - even at sub-zero temperatures they clean the glass well. The effect is achieved by adding rubber to the rubber composition. It retains its flexibility regardless of the ambient temperature. As a result, its cleaning qualities do not change in any way.

Replacement options
Namevendor codeCharacteristicsPrice
Frame
CHAMPIONE51B02UniversalFrom 610 rubles for 1 piece.
Frameless
Trico FlexFX500+FX500Symmetrical spoilerFrom 1.7 thousand rubles
Hybrid
NWB AERO RAIN 50 + 50 cmND-020+ND-020ND (Aero rain wiper)From 2 thousand rubles
Winter
Maruenu Gyraless Snow 50 + 50 cmTS-50+TS-50With tourmalineFrom 4.5 thousand rubles per pair

When choosing new wipers, take into account:

  • mode of operation of the vehicle,
  • maximum driving speed,
  • the region in which the car is located.

If the car is used in the Far North, then it is advisable to purchase winter brushes. Driving at speeds over 100 km/h - the windshield will only be cleaned with the proper aerodynamic shape (frameless, hybrid blades). If you have no experience, you should contact a consultant.

Some drivers purchase several pairs of brushes at once:

  • for summer,
  • for winter,
  • for long trips and highway driving.

It is very comfortable. Allows you to avoid unnecessary expenses. Spare parts are always available.

What size of wipers (brushes) to choose for Lada XRAY

24 November 2021 LadaOnline 44 248

The cleanliness of the windshield, and therefore safety on the road, depends on the wiper blades. As a preventative measure, it is recommended to replace brushes at least once a year. Let's look at how long the wipers on the Lada XRAY are and what size is best to replace them with.

Front wipers

Lada XRAY windshield wiper blades have different lengths and, accordingly, different catalog numbers:

  • driver's brush - 650 mm;
  • passenger brush - 360 mm.

Upon closer examination of the front windshield wipers on the Lada XRAY, you will notice that longer blades can be installed.

For example, replace the driver's side with a 700 mm one, and instead of a short 360 mm passenger side, you can install a 400 mm wiper blade ( 70 mm and 400 mm ). This will increase the windshield cleaning area slightly.

The dirty triangle at the bottom of the glass will become smaller, and the clean area at the top will expand. However, in winter, the edge of the wiper on the passenger side will touch the ice on the edge of the glass:

Example of installation of brushes 650 mm and 380 mm:

Fastening windshield wiper blades on Lada XRAY, Bayonet arm type (pin). That is, when choosing wipers, make sure that an adapter of this type is included in the kit.

  • Or order the adapter separately, search for “Bayonet Lock Adapter”.

Rear wiper

The standard rear wiper has a size of 300 mm. It can be replaced with a 400mm long brush. This will significantly increase the cleaning area:

What size wipers do you use on the Lada XRAY? Is the standard cleaning area sufficient for safe and comfortable vehicle operation? Take part in the survey, leave your feedback and recommendations. instructions for replacing windshield wipers on Lada XRAY.

logbook Drummer888 and xrom-spb

Keywords: lada xray windshield wipers | lada xray glass | accessories lada xray

6 0

Found an error? Select it and press Ctrl+Enter..

Similar materials

  • What size of wipers (windshield wipers) is better to choose for Lada Priora
  • About the size of windshield wiper blades Lada Largus
  • What size to choose for Lada Granta, Kalina 2 wipers
  • Source: https://xn--80aal0a.xn--80asehdb/car-description/reviews-tests/lada-xray-reviews-tests/1528-kakoy-vybrat-razmer-dvornikov-schetok-dlya-lada-xray. html

Replacing windshield wiper blades for Lada X-Ray - selection and installation

Among LADA X-Ray owners there are many complaints about the standard windshield wiper blades. Car owners note that they wear out quickly, which is why they do not clean the glass effectively - snow and water seep through them and stains remain on the windshield, significantly impairing visibility, especially at night.

It is the moment with the work of the wipers at night that is demonstrated in the video.

However, it is recommended to replace brushes at least once a year, and therefore soon any owner of a domestic crossover will have a question regarding replacement. However, it turns out that replacing windshield wiper blades on the Lada X-Ray is not as simple as it initially seems.

Choice

It’s worth noting right away that you don’t have to be tied to your existing size. So, the length of standard brushes is:

  1. Driver's side - 650 mm;
  2. Passenger - 360 mm.

The driver's brush should be set to the same length as from the factory - 650 mm. As for the passenger compartment, we recommend the option with a 380 mm product. This solution will not affect the cleaning efficiency in any way, but its zone will be slightly wider - the upper edge of the cleaning will move another 10 mm, and the “triangle” at the bottom of the glass will become smaller.

Where can I buy?

You can buy windshield wiper blades for Lada X-Ray in many online stores. Some suggestions are given in the table.

Brand, modelvendor codePrice, rub.)
AIRLINE AWB-HVS-SGLXR710
CHAMPIONAFL65+AFL381790
BOSCHA868S1690
Bosch AeroTwin Plus3397006952+33970069411710
Rekzit Super Flat913650+913350+km81110
Valeo First Multiconnection575789+5757801620
Bremax UWBUWB-26710
Osawa SW (winter)SW65+SW35+KM82410
Maruenu Flex Active SwordAS-65+AS-35+RQ-RN1250

Naturally, these are not all the products that are available on the market. As you can see, the cost varies over a fairly wide range, and therefore any owner will find goods for himself.

In addition, before purchasing, you should clarify the mounting method. The fact is that the windshield wiper arms of the Lada X-Ray are not standard, like those of many other AvtoVAZ models (with a hook), but are made like on Renault models, with a Bayonet-type mount.

To install them, you will need adapters. Some brush sets already have such adapters. Otherwise, you will have to purchase them separately. You can find them by article number 300 420.

By the way, there are situations when there is an adapter for the driver’s brush, but not for the passenger’s. Therefore, it is recommended to check with the manager at this point?

Rating
( 1 rating, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]