Wheel size of Lada Granta liftback: table of tire sizes for Lada Granta Sport

>Selection of tires and wheels for the Lada Granta:

Tires and discs on LADA Grantaostal models Lada: Lada 110, Lada 111, Lada 1111 OKA, Lada 112, Lada 1200, Lada 1200dl, Lada 1300, Lada 1300SL, Lada 1500, Lada 2104, Lada 2105, Lada 2107, Lada 2108, Lada, Lada 2109, Lada 21099, Lada 4X4, Lada 4×4 Bronto, Lada 4×4 Urban, Lada 4×4 Urban, Lada Classics, Lada Fora, Lada Granta, Lada Granta Cross, Lada Granta Sport, Lada Kalina Cross, Lada Kalina Sport , Lada Largus Cross, Lada Nadezhda, Lada Niva, Lada Niva II, Lada Niva II, Lada Nova, Lada Priora, Lada Riva, Lada Samara, Lada Taiga, Lada Vesta, Lada Vesta Cross, Lada Vesta Sport, Lada Vesta SW, Lada Vesta SW Cross, Lada XRay, Lada XRAY Cross, Lada Kalina, Lada Kalina Cross, Lada Largus, Lada Largus Cross,

Lada Granta 2011Lada Granta 2012Lada Granta 2013Lada Granta 2014

Lada Granta 2015Lada Granta 2016Lada Granta 2017Lada Granta 2018Lada Granta 2019

Lada Granta 2020Lada Granta 2021

Disc parameters for Lada Granta:

PCD 4×98 with a diameter from 13 to 16, a width from 5 to 6 and a profile from ET35 to ET38, like the VAZ Kalina

Tire parameters:

Tire sizes from R13 to R14, width from 175 to 185 and profile from 60 to 70.
Minimum tire size: 175/65 R14, maximum:

le>

Viatti Strada Asimmetrico175/65 R14 82H

le>

Kama 505175/65 R14 82T

le>

Viatti Strada Asimmetrico185/60 R14 82H

le>

Kama Euro 519175/65 R14 82T

Selection of tires and wheels for the Lada Granta car

Using automatic selection of tires and wheels for the Lada Granta , you can avoid many problems associated with their compatibility and compliance with the recommendations of automakers. After all, they have a huge impact on a significant part of the vehicle’s operational properties, primarily on handling, fuel efficiency and dynamic qualities. In addition, tires and rims in a modern car are one of the active safety elements. That is why the choice between them should be made as responsibly as possible, which presupposes the presence of a whole range of knowledge about these products. Unfortunately, most car owners prefer not to go into such technical nuances. A fully automatic selection system in this case is perhaps the only way to avoid the wrong choice when purchasing tires and rims. And it is very wide, which is due to the diversity of the range of such products presented in the Mosavtoshina online store.

11-12-2014
669 586

Tire size is one of the most important parameters that can significantly change the behavior of a car on the road. In our review we will tell you about the permissible tire size on the Grant, as well as what the size of the tires affects during the operation of the car. Let's start with the tire and wheel sizes allowed by the manufacturer.

Choosing wheels for the Lada Granta: tire and wheel sizes, bolt pattern, table

What is the tire pressure of Lada Granta

Each tire manufacturer determines the pressure for tires individually, based on their technical indicators and characteristics. Exact data is always indicated in the vehicle's operating manual.

Name	Atmospheres (Bar)
Front (summer)	2.1
Rear (summer)	1.9
Front when fully loaded	2.4
Rear at full load	2.8
Winter (front/rear)	2.2 / 2.1

Old family (until 09.2018)

Sedan

Equipment	Tire size with load capacity and speed indexes*	Disc size
rim width (inches)	rim offset (ET), mm**
Standard	175/70 R13 82T, N	5J	35
Standard Norm Lux	175/65 R14 82T, N 185/60 R14 82T, N 185/55 R15 82T, N	5J, 51/2J, 6J	35
Sport	185/55 R15 195/50 R16	5J, 51/2J, 6J	35

R is not a radius, but a designation of the radius of the tire, and the number is the diameter of the rim in inches.

Liftback

Equipment

Tire size with load capacity and speed indexes*

Disc size

rim width (inches)

rim offset (ET), mm**

All modifications

175/65 R14 82T, N

185/60 R14 82T, N

185/55 R15 82T, N, V

5J, 51/2J, 6J

* Speed indices: T – up to 190 km/h, H – up to 210 km/h, V – up to 240 km/h. Load capacity indices: 82 – 475 kg.
**Rim offset (ET) is the distance from the mating plane of the disc to the middle of the rim.

Wheel hub bolt pattern 4x98, DIA - 58.5.

Characteristics

Any car tire has a number of characteristics that must be taken into account in order to choose the right tire for your car. The first most important characteristic of rubber is size. Tire size parameters using the 175/65 R14 marking as an example:

175 is the width of the tire, measured in millimeters.
65 is the profile height, measured as a percentage of the tire width.
R - indicates that the tire is radial (from the English word radial), but certainly not that the radius designation follows, as many people think. Wheels have no radius, only diameter. The radius of a tire is its type of construction. There is also a bias tire type.
14 is the tire diameter in inches. To convert this figure into the usual centimeters, you need to multiply the inch value by 2.54.

Tire sizeThe second important characteristic of any tire is the maximum weight and speed index. It is most often recommended to install 82 H tires on Grant cars. This marking indicates that this tire can withstand loads of up to 475 kg and operates effectively at speeds of up to 210 km/h.

The maximum load parameter is indicated for one tire. Therefore, for a set of 4 tires, the maximum load in this case will be 1 t 900 kg. Considering that the average total weight of the Grant is 1.5 tons, the load on the tire is calculated with a good margin.

Next, you need to pay attention to the presence of thorns. Many versions of winter tires are produced without studs at all. Some have sparse thorns.

Each manufacturer strives to come up with a new, improved type of studs. They differ in shape, size and material from which they are made. Their main purpose is to pierce the ice for better starting and braking on icy surfaces.

Additional Information! In many countries, including Russia, there is a legal restriction on having too many studs on a tire. This is due to the fact that the spikes damage the asphalt surface.

The next important factor is the depth of the tread pattern and the pattern itself. The tread determines the quality of wheel grip on the road surface. The more technologically advanced the pattern on the rubber is, the better the tires will have noise, drainage and reliability characteristics.

In addition, there are many other characteristics. In general, the better the quality of the tire, the more reliable and stable ride it will provide. Low-quality cheap tires can also wear out extremely quickly and lose studs, so such savings are not always appropriate.

What other tires and wheels are suitable for the Grant?

A survey was conducted among VKontakte users, asking them to choose alloy wheels for Granta. 42% of participants recommend installing R15 wheels on the Grant. 27% chose R14. Third place (17% of voters) believe that 16 wheels on Grant will look best. The left tire compatibility table is built for 175/70 R13, and the right one is for 185/55 R15:

Green indicates the minimum deviation of the wheel diameter (up to 3 mm); Orange indicates a diameter deviation from 3 to 6 mm.

Based on reviews from owners, we have compiled a list of compatibility of Lada Granta tires and wheels:

Lada Vesta wheel sizes, standard and alternative

R14 wheels on Granta can be installed with the following tire parameters: 175/60 R14, 175/55 R14, 175/50 R14, 175/45 R14, 175/40 R14, 185/55 R14, 185/50 R14, 185/45 R14 , 185/40 R14, 195/50 R14, 195/45 R14, 195/40 R14, 205/55 R14, 205/50 R14, 205/45 R14, 205/40 R14 and 205/32 R14.
R15 wheels on the Grant are installed with the following parameters: 175/50 R15, 175/45 R15, 175/40 R15, 185/50 R15, 185/45 R15, 185/40 R15, 195/50 R15, 195/45 R15, 195/ 40 R15, 205/50 R15, 205/45 R15, 205/40 R15 and 205/32 R15.
R16 wheels on the Grant are equipped with tires: 175/50 R16, 175/45 R16, 175/40 R16, 185/45 R16, 185/40 R16, 195/45 R16, 195/40 R16 and 205/32 R16.
R17 wheels for the Grant (the same number voted for R13 wheels); it is recommended to install them with tires: 185/40 R17, 195/40 R17 and 205/32 R17.

Don't forget about the rim width:

When installing tires or wheels that differ in parameters

from those recommended by the factory, you can:

be refused warranty repair of the chassis;
be stopped by a traffic police inspector, who has the right to draw up a report on the car’s non-compliance with the requirements of the Technical Regulations;
fail to pass technical inspection.

Choosing wheels for the Lada Granta: tire sizes, rims, bolt pattern

When choosing tires for a car, look at the equipment, year of manufacture and sizes of Grants wheels. In addition to the drilling parameters, it is necessary to consider:

Disc diameter. Among car enthusiasts, r14 is considered the most popular, with r15 and r16 wheels in second place. The larger the diameter, the better the appearance of the car and its behavior on the road.
The diameter of the central hole must correspond to the size of the car hub. For Granta it is 58.6 mm.
Rim width - the size of the surface on which the tire is located. "Lada Granta" is available with a width of 5; 5.5 or 6 inches.
Overhang is the distance from the hub mounting pad to the axial plane passing through the middle of the rim and dividing it into 2 equal rings. This value shows how far the tire can extend from under the car's fender. The parameter affects the width of the wheelbase. The standard size for a disk with a diameter of 13 inches is 35 mm.

For the correct selection of wheels, there is a detailed size formula. The number 5 or 6 in it means the desired rim width, expressed in inches. J indicates that the disc is intended for a vehicle with front or rear wheel drive, but not all-wheel drive. The letter x indicates a forged or cast wheel. Numbers 13, 14 or 15 are the disc diameter in inches, ET is the offset in mm.

"Lada Grants": bolt pattern

Depending on the configuration, it can have different types:

For the Lada Granta Standard sedan there are options 5Jx13ET35, as well as 5Jx14ET35 or 6Jx14ET30.
The “Norma” package can be purchased with 5Jx14ET35 or 6Jx14ET30 wheels for 2011 models. Since 2012, wheels with a 38 mm offset have been produced.
Grants Lux discs can be 5Jx15ET35 or 6Jx15ET.
The “Sport” package is available on standard 15-inch wheels with a 35 mm offset or 16-inch wheels with low-profile 195/50R tires.

One of the criteria for choosing wheels for Granta, Vesta Cross, Kalina and other models is the shape and size of the bolts and nuts. It is necessary to take into account the shape of the recess in the mounting hole of the disk. Most often, the kit includes bolts with a cone-shaped clamping part with an angle of 60°, less often - flat or hemispherical. On some brands, the header is 1.3 mm in size.

The surfaces of the bolt and the disk must correspond exactly to each other. Otherwise, the tightening will weaken over time. In addition, the bolt must be long enough, but not cling to the surfaces of the brake discs.

The 16-valve Lada Granta Liftback in the Sport package comes from the factory with original 16-inch wheels. Exclusive Grants Sport models are equipped with 17-inch wheels with wide low-profile tires. In this case, it is recommended to buy an additional set of winter tires - such assembled wheels are too rigid and are not suitable for driving at low temperatures.

The Lada Granta wheel size is selected according to the following rules:

For p13 stampings, tires with a profile from 65 to 75 and a width of 175-185 mm are suitable. Standard factory tires have dimensions of 175/70/R13.
For p14, tires with a profile of 55-65 and a width of 175-185 mm are allowed. Installed on Granta Universal models 2021 and later.
The standard equipment for p15 wheels is tires with a standard size of 185/55/R15. These sizes are suitable for summer and winter tires.
The Granta has 16 rims and is equipped with tires with a profile of no more than 50 and a width of 195 mm.
The best option for a Granta with 17 wheels is tires with parameters 205/40-45/R17. In this case, the bolt pattern on the Grant remains the same.

When buying winter tires, you should pay attention to the narrowest options. This will increase traction due to weight distribution

The lowered profile is inconvenient for driving on uneven roads in winter and summer - even small potholes are well felt by the driver and passengers.

Table of ideal wheel and tire parameters

Based on the opinions of auto experts and reviews from owners, compatibility tables for wheel and tire sizes on Lada Granta, Kalina and other models of this brand were compiled.

Table 1. Lada Granta bolt pattern

Table 2. Lada Granta bolt pattern

Table 3. Lada Granta bolt pattern

If the Lada Granta wheel size does not correspond to the recommended one, the car owner may be denied warranty repairs. In addition, such a car runs the risk of not passing the next technical inspection.

What does the size of tires and wheels affect?

Car style	will improve	will improve	will improve
Road holding	will improve	will improve	will improve
Steering precision	will improve	will improve	will improve
Tire grip	Will not change	Will not change	will improve, but only on dry roads
Resistance to hydroplaning	Will not change	Will not change	will get worse
Comfort on rough roads	will get worse	Will not change	will improve
Road noise	Will not change	Will not change	will intensify
Gasoline consumption	Will not change	will increase	will increase
Tire wear	Will not change	Will not change	will increase

It is worth noting that it is better to choose winter tires for the Lada Grant as narrow as possible. Thus, the pressure of the car on the road surface will be greater, and therefore the grip on the road will improve. Also, do not forget that wide tires are more sensitive to the ruts on the road, and low-profile tires will transfer even the smallest bumps to your butt.

The smaller the unsprung masses

(this includes a lot of tires and wheels), the better the car will hold the road and accelerate faster. For example, if you put wheels on a car that are 2 kg lighter each, then acceleration to 100 km/h will be reduced by 0.2 seconds.

Attention! Installing larger wheels may lead to problems with ABS and ESC calibration (the systems may not work correctly).

Let us remind you that for safety and to increase the service life of your tires, you should maintain the recommended pressure in the Lada Granta tires.

Where can I buy

: in our online store (category Discs for Grants).

Keywords: Lada Granta wheels | Lada Granta tires | Lada Granta Sport

Share on social networks:

Front wheel bearing size VAZ 2108

Home/Car brands/Lada/Granta

Select car generation:

Lada Granta

Dimensions may vary depending on the installed engine and vehicle equipment!

Review of summer tires on LADA Granta

Continental ContiPremiumContact 2 tires, manufactured in Portugal, have a number of advantages: minimally short braking distance, economical gas mileage, and comfortable travel. Among the minor disadvantages is a decrease in maneuverability on wet road surfaces. Cost – from 2500 rub.
Nokian Tires Hakka Green 2 - rubber produced in the Russian Federation. Pros: good handling, short braking distance on wet roads, economical fuel consumption. The downside is lack of smoothness. Cost – from 2250 rub.
Turkish-made Pirelli Cinturato P1 tires are distinguished by good braking on dry roads, low gas consumption and handling. A minor drawback is the unclearness of the course and lack of smoothness. Cost – from 2690 rub.
KAMA-217 is a factory all-season tire. Suitable for leisurely driving around the city or in nature. Wears out quickly on uneven road surfaces and when driving fast. Cost – from 1571 rub.
Bridgestone ECOPIA P-EP150 tires are characterized by handling and maneuverability. Among the disadvantages, users highlight increased noise levels at high speeds. Cost – from 2060 rub.

Today the market is filled with many different brands and modifications of tires, both for summer and winter. Therefore, when purchasing tires of a particular brand, car enthusiasts only need to know the required tire sizes.

Lada Granta is a budget mass car produced by Volzhsky Automobile. This car has gained great popularity among citizens of Russia and the CIS countries. In view of its demand, the issue of replacing winter tires on Grant is relevant.

The safety of all road users, as well as the comfort of the driver and passengers while driving, depends on well-chosen winter tires. This article will discuss the features and main characteristics of winter tires for the Lada Granta, and describe the rules for choosing winter tires for the Granta liftback and its other modifications.

Tires on Grant.

Lada Granta (2011 - 2021)

Additional Information

Drilling (PCD): 4×98
Reach (ET): 35 - 35 mm
Center Hole Diameter (DIA): 58.5mm

Fastener to hub: Bolt
Thread: M12 x 1.25

#TIRES STOREBuy tires on GrantaTires 175/70 R13 summerSummer tires, rating, pricesBuy wheels on Granta

Tire

Disk

Size Load index Speed index Pressure Size Reach Drilling I4, Petrol, 1.6i 86 hp 175/70R1382T1.95Jx13ET354x98175/65R1482H25Jx14ET354x98185/60R1482H-5.5Jx14ET354x98185/55R1 582H26Jx15ET354x98 I4, Petrol, 1.6i 97 hp 175/70R1382T1.95Jx13ET354x98175/65R1482H25Jx14ET354x98185/60R1482H-5.5 Jx14ET354x98185/55R1582H26Jx15ET354x98 I4, Petrol, 1.6i 105 hp 175/70R1382T1.95Jx13ET354x98175/65R1482H25Jx14ET354x98185/60R1482H-5.5J x14ET354x98185/55R1582H26Jx15ET354x98most often purchased

Summer tires 175/65 R14 for Lada Granta - store offers

View all offers

Found an error in your data? Please let us know about it.

Wheels on a car are, without a doubt, one of the main components of the entire structure. Currently, the AvtoVAZ concern installs wheels and tires of various diameters on the Lada Granta model range, depending on the configuration of a particular car. In this article we will take a closer look at which tires and wheels are best suited for this model from the Russian manufacturer, as well as how increasing the diameter and width of the wheel from the “stock” one affects the car’s behavior on the road.

Non-standard tire size for LADA Granta

On some cars it is possible to install wheels in the size range R16 or R17. But car owners should be aware that often such a change can only harm the car and worsen its overall quality indicators.

When releasing the Lada Granta, wheels with a diameter of R16 are used only on the Sport version, while the tire size is 195/50. In addition to this size, setting this diameter is possible at 175/50, 185/40, 195/40 and below.

For other Lada 2190 models, specialists and car manufacturers do not recommend installing disks whose diameter exceeds R15. Since it has been proven that the higher this indicator, the greater the risk of disc deformation. Therefore, when choosing new wheels and tires, you should not experiment with new sizes. Tires with dimensions that do not differ from the factory assembly are best suited for the car.

Factory tire and wheel sizes

In most cases, the Lada Granta is equipped from the factory with “stamps” and light alloy wheels with a radius of 13 and 14 inches, but not so long ago they also began to be equipped with 15-inch wheels.

Lada Granta in the “Standard” and “Norma” configurations were equipped with 13 wheels. But you need to look at the size of the front brake disc, it can be 14th wheel radius

These durable steel wheels consist of a rim onto which the tire is directly attached. This entire structure, or rather its elements, are connected to each other using strong welding. And for convenience during operation, each disc contains information about the width of the rim profile, the moment of disc departure and other indicators.

After a certain point in time, the wheel rims will need to be checked for lateral and radial runout. Such maintenance should certainly be carried out at tire service stations or technical service stations. service.

Wheel rim bolt pattern on Lada Granta

The manufacturer advises installing wheels on the Lada Granta with a diameter (A) of 13 to 15 inches, with a profile width (B) of 5-6 J, with an offset (ET) of 33 to 38 millimeters, with the usual AvtoVAZ bolt pattern - PSD 4*98 ,DIA 58.5 .

All these parameters are most clearly presented in this picture.

Table of ideal wheel and tire parameters

Thanks to this table, you can select the optimal tire and wheel parameters.

General background information

Ranges of possible values for tires and wheels Lada Granta Cross 2020.
Tires

Diameter	15″–15″
Width (mm)	195–195
Profile (%)	55–55
The smallest size	195/55 R15
The biggest size	195/55 R15

Wheel disks

Diameter	15″–15″
Width (inches)	5.5–6
Reach (mm)	33–33
Drills	4×98

Photo

Expert advice

When choosing tires for a car, you must first follow the manufacturer's instructions. Ask yourself a few questions.

On what roads will the car be primarily used?
Do you need increased cross-country ability?
How much of the route will be city roads and how much will be highways?
Will the vehicle carry heavy loads?

The answers to these and similar questions will help determine which tire parameters you need to pay special attention to.

How to choose the right wheels for Lada Granta Cross 2021?

3 types of rims:

Stamped (economical price category) - made from a sheet of iron by stamping on a press.
Light alloy - manufactured by casting (more reliable than stamped ones).
Forged (the highest quality and more expensive than the previous ones) - made from light alloys by stamping at high temperatures.

The choice depends on financial capabilities. However, it should be borne in mind that the quality of the road surface on which you have to drive every day must also be taken into account.

So, if it gets into a hole, a stamped disk will bend and will not cause harm to the tire, but a forged or cast one can cut it. There is a possibility that the cast disc may burst or crack.

It should also be noted that repairing “stamping” wheels is cheaper than repairing cast or forged wheels. But wheels with high-quality cast and forged disks kill the suspension less, because lighter and have more perfect geometry (better balanced).

The same wheels may or may not rub with tires on the same car - wheel alignment adjustment will help here.

What is the tire pressure?

It is the driver's responsibility to constantly monitor tire pressure. This will avoid standard problems associated with vehicle operation. An abnormal pressure value often causes:

deterioration of management;
uneven tread wear.

Often the car owner independently reduces the pressure in the wheels of his own vehicle. This reduces the load on the suspension, and the car “passes” various road irregularities an order of magnitude easier. But it is worth noting: a decrease in pressure even by 0.1 MPa leads to serious problems. The main ones include:

increased fuel consumption;
rapid wear of the outer tread segments;
the car becomes less maneuverable.

An overinflated wheel causes no less problems. The central part of the cylinder begins to wear off quickly. In addition, at ambient temperatures of more than 60 degrees Celsius, the tire may simply explode. Which will lead to driving into the oncoming lane.

A little about wheels

Tires - Today, these are one of the most high-tech products on which safe and comfortable movement by car directly depends. There are a large number of tires on the market today from many different manufacturers. They consist of a frame, a protector and a breaker layer between them. And also the toughest part of the tire - the bead, which is designed for reliable fixation and sealing on the rim.

Disks - In the modern world, a wheel includes two parts: the rim - which is a surface closed in a ring with sides on which the tire is fixed, and the disk - which is a support for the rim with holes for fixing the entire wheel to the hub, most often using bolts or hairpins. Currently, there are the following types of discs: stamped, cast, forged, composite and combined.

What is the effect of different tire and wheel sizes?

Options.	Increasing the diameter of the disc.	Increasing the width of the disk.	Increasing tire width.
Exterior of the car.	will improve	will improve	will improve
Behavior on the road.	will improve	will improve	will improve
Control stability.	will improve	will improve	will improve
Road grip.	Will not change	Will not change	Will improve
Resistance to gliding on the water surface.	Will not change	Will not change	will get worse
Comfort while traveling on rough roads.	will get worse	Will not change	will improve
Noise from the road surface.	Will not change	Will not change	will increase
Gasoline consumption.	Will not change	will increase	will increase
Tire wear.	Will not change	Will not change	will increase

View of Lada Granta with different types of tires

In order to more clearly understand how the appearance of a car will change depending on the type of tires and wheels, we offer a collection of pictures.

R13

Lada Granta on 13th wheels Lada Granta on 13th radius wheels With R13 wheels

R14

With R14 wheels

R15

With R15 wheels

R16

With R16 wheels.

R17

With R17 wheels.

Review of winter tires on LADA Granta

Nokian Hakapellitta 9 are Russian-made tires. Drivers note wear resistance, good car handling in winter and high-quality grip on the road surface. Disadvantages include high noise levels when driving and lack of smoothness. Cost – from 5400 rub.
Toyo Observer Ice Freezer is a tire made in Malaysia. They are distinguished by stability, controllability on ice and long braking distance on asphalt. Cost – from 3200 rub.
Continental Ice Contact are made in Korea. They are characterized by a high level of longitudinal and lateral grip and low fuel consumption. The downside is reduced driving comfort. Cost – from 4400 rub.
Hankook Winter Pike, country of origin – Russia. The positive side of tires of this brand is the good handling of the car on icy and snowy roads. The minus is the length of the braking distance. Cost – from 3200 rub.
GoodYear Ultra Grip tires are made in Germany. They are distinguished by high maneuverability on snow-covered roads and uncertainty of movement on asphalt surfaces. Cost – from 3500 rub.

What wheels were installed on different bodies and configurations?

In four different configurations of Lada Granta, the diameter of the wheels used ranges from 13 to 16 inches:

Standard - 5Jx13ET35, 5Jx14ET35, 6Jx14ET
Standard - 5Jx14ET35, 6Jx14ET
Lux – 5Jx15ET35, 6Jx15ET
Sport - 5Jx15ET35; in the sports package they also began installing wheels with a 16 radius and low-profile tires in size 195/50R

The first digital designation of these markings indicates the width of the rim in inches, the following indicators from 13 to 16 are the diameter of the disk, ET35 is the offset in mm.

The standard bolt pattern parameters are the same as those of old VAZ models - 4x98, that is, 4 holes, the centers of which are located along a circle with a diameter of 98 mm.

The diameter of the central hole according to the hub used is 58.6 mm. The most popular rim size among Lada Granta owners is considered to be R14, but many people prefer to drive on 15 rims.

Table

Also, as an alternative, there are special tables for determining drilling parameters. They provide all the information on recommended sizes and parameters for cars of all generations.

Compatibility table for Largus

The presented table allows you to determine the sizes and parameters of wheels for the Lada Largus in various configurations and versions. For other models, such tables can be found on the website - https://lada.online/

As for the Lada Kalina car, the recommendations for selecting tires are the same as for any other vehicle. Seasonality is very important. In winter, it is necessary to determine where the car will be used most. If on country roads and areas with snow and ice, then it is advisable to purchase studded tires. If the car owner spends a lot of time on short trips around the city, then ordinary Velcro winter tires are quite suitable. The choice of brand depends on financial capabilities and personal preferences.

In terms of size, there is not much difference in ride between the R13 and R14 wheels. 13-inch ones are more suitable for winter, and 14-inch products are better for use in the warm season.

The bolt pattern of various models of the Lada concern is most often similar. The Largus and Vesta models have identical parameters to the Renault Logan. As for “Kalina” and “Granta”, which have an identical base, their drilling is the same. You can use pivot tables to determine the parameter.

Source: kolesa.guru

Standard disk sizes

When talking about wheel sizes, it is not enough to just mention their diameter. The remaining parameters are important for understanding whether they are comparable to the hub of a Lada Granta car, as well as what type of tire they are intended for.

For example, rim width is the size of the tire seat. The mounting hole pattern gives an idea of whether additional spacer adapters will have to be used. As noted above, this car uses a 4x98 wheel installation scheme with a center of 58.6 mm.

Disc offset is a fairly important indicator, especially when using wide wheels. It reflects in mm the distance from the hub mounting pad to the plane that visually divides the rim into two rings of equal width. Disc diameters are measured in inches.

As standard, the Lada Granta is equipped with sizes R13, R14, R15. It is rare to find a model with 16 discs.

The table shows the recommended tire sizes and the corresponding wheels.

Tires	Discs
175/70R13	5Jx13ET35
175/65R14	5Jx14ET35, 6Jx14ET35
185/60R14	5Jx14ET35, 6Jx14ET35
185/55R15	5Jx15ET35, 6Jx15ET35
195/50R16	6.5Jx16ET29

The numbers indicated through a fraction in the tire size mean: tire width / profile height as a percentage of the width. The Latin letter “R” indicates the type of tire - radial. The last numbers correspond to the diameter of the disk.

Winter tires for Granta: features

When choosing winter tires for a Lada Granta car, you need to know exactly what modification of this car the tires are selected for. The first generation Lada Granta began production in May 2011 as a sedan in several trim levels. At the same time, Lada Granta Sport was introduced. In May 2015, production of the Lada Granta Liftback began.

The release of the first generation "Grants" ended in 2021. In 2019, mass production of the second-generation Lada Granta began in two bodies: a sedan and a liftback, in several trim levels. The in-plant designation of the Lada Granta sedan car is VAZ 2190, the Lada Granda liftback is VAZ 2191.

Parameters of standard nuts

One of the main parameters of nuts or bolts is the shape of their pressing surface, which can have several varieties. When selecting the necessary nuts, you should proceed from the shape of the recess in the mounting hole of the disk.

Most often it is necessary to use bolts or nuts with a cone-shaped clamping part. As a rule, the cone has an angle of 60°. Sometimes such bolts may have a 1.3 mm head and a nose at the end of the nut.

The clamping surface of the fastener can also be flat or hemispherical. It is important that the clamping planes of the fastener and the disk fully correspond to each other. Otherwise, over time, as a result of strong dynamic loads, the attachment point will weaken. When choosing nuts with closed heads, you should pay attention to their length.

If the pin prematurely rests on its inner part, then it will not be possible to fully tighten it. Also, nuts that are too short may not leave room for the socket head of the impact wrench. Some wheel models only allow the use of hex or star nuts.

When choosing bolts, you need to consider their length. A reliable connection can only be achieved if the bolt is screwed in to the entire threaded thickness of the hub. However, if it is too long, then when the car moves, such fasteners will begin to cling to internal structures.

Ideally, the tip of the bolt should only protrude a couple of threads when fully tightened. Bolts are made only from steel, but nuts can be steel, aluminum or titanium.

What you should pay attention to when choosing tires for Granta

When choosing winter car tires, special attention should be paid to the road surface on which these tires are intended to be used.

If the tires are designed for mud and off-road use, they will cope better with drifts, sleet and ice, but may not be effective on wet pavement. In addition, powerful tires that perform well in suburban conditions can wear out greatly when driving on a clean highway. On the contrary, tires designed for everyday city driving may not cope even with light off-road conditions.

What drives can be installed

It is clear that any car manufacturer, just like AvtoVAZ, always recommends installing only its original sets of spare parts. But replacing a wheel rim with non-standard samples has long been considered completely commonplace.

Often such a replacement can even improve handling characteristics and reduce financial costs. The wrong approach to this issue can lead to the repair of suspension elements and the entire chassis of the car.

Owners of Grants sometimes notice that the standard set with winter tires copes with its functions worse than the less wide non-standard options. Wide wheels are prone to skidding and hydroplaning.

Regardless of the reasons why the discs are replaced, inexpensive stamped products, cast or forged options can be installed on the Lada Granta. If the stamp is made only of steel, then the material for the production of light alloy wheels can be aluminum, titanium and magnesium alloys.

Stamped wheels, despite their unattractive appearance, are in high demand due to their practicality. Firstly, this is the cheapest replacement option, and secondly, with strong impacts such a product will only bend, which can always be fixed, and the unattractive appearance can be easily hidden with inexpensive plastic caps.

But their high weight reduces the dynamics of vehicle acceleration and increases fuel consumption, which often tips the scales towards the purchase of cast and forged wheels, which, due to their lightness and high thermal conductivity, improve dynamics and contribute to faster cooling of the brake elements. Products made from titanium alloy have the most attractive appearance and have the best strength, but they are also the most expensive of this product segment.

Their aluminum counterparts are more popular. They are not as expensive as titanium, but in terms of strength they meet all safety requirements, and, moreover, they look great. The disadvantages of cast wheels include their worse strength characteristics than stamped steel options and high cost. A strong blow can permanently damage the disk.

Stamped and cast: which is better?

According to the production method, wheels for LADA Kalina are divided into two global categories: stamped (from steel sheet) and light alloy (forged, cast or combined).

For the first option, manufacturing involves welding individual structural elements of the product. The technology is simple, which has a positive effect on the cost of disks.

Among the advantages of “stampings” we note:

reliability;
maintainability (tendency to eliminate bent areas);
durability.

Negative aspects:

it is difficult to perform auto-balancing;
significant mass of products;
lack of design possibilities (same type);
low corrosion resistance.

Now let's touch on light alloy options. Such discs are more progressive products that are made from light metal alloys such as magnesium and aluminum, etc.

When choosing the kit you like, we recommend paying attention to the indication of the primary metal included in the material structure. If magnesium predominates, then the discs are light in weight, but the strength properties of this option are far from ideal

Aluminum gives the product strength and fluidity. This translates into good resistance to cracking under impact loads. Wheel alignment will also likely be required.

If magnesium dominates, then the discs are light in weight, but the strength properties of this option are far from ideal. Aluminum gives the product strength and fluidity. This translates into good resistance to cracking under impact loads. Wheel alignment will also likely be required.

To give preference to any of the above options, we recommend that you undertake an approximate analysis of the condition of the roads on which your LADA Kalina will travel in the future.

Advantages of "casting":

availability of a wide range of models;
light weight, which has a positive effect on handling and dynamics;
good dissipation of heat generated by brake units.

Parameter description

The installed rims have a huge impact on the behavior of the car on the road, its stability, handling and other characteristics. Safety, dynamics and appearance will depend on their size and parameters. To select, purchase and install a wheel on a car, you need to have information about the bolt pattern parameter. At the moment, for the entire model range you can buy both original factory products and those produced by various domestic and foreign companies. For example, the popular brand “K&K” has an agreement with the manufacturer and produces a special line for Lada models.

Grant's bolt pattern, original wheel and tire dimensions

New wheels made in an individual design will help perfectly decorate the appearance of the vehicle. However, the most common reason for replacement is wear and tear or a change of season. But car tuning is still very popular. They do it to give the car a sporty feel. One of the main elements to replace when tuning is the wheel rim.

A similar rule applies not only to any Lada model, but also to any other car, regardless of manufacturer and model.

"Granta" is available in sedan, liftback and hatchback body styles. This allows car enthusiasts to choose the most convenient type of execution. The diameter, width and drilling of the discs do not depend on the body type.

During the operation of the vehicle, the former interest is often lost, the appearance becomes boring and you want to change something. In this case, tuning comes to the rescue, allowing for visual and technical improvements. It is possible to replace some car components with improved, sportier and more attractive ones. The main part on which the appearance depends is the rims. In this regard, car enthusiasts change them first. However, for any vehicle, wheels are not only part of the exterior, but also an important design element, the size of which, the method of their production, weight and many other characteristics determine the vehicle’s stable behavior on the road surface, handling and dynamic qualities.

"Lada Kalina Cross", wheel size R16

But it is not enough to simply improve the design of the car by installing new structural elements. It is important that these improvements do not reduce the vehicle's operating efficiency and performance. In order for the replaced parts to serve efficiently and for a long time, it is necessary to select and install original components that meet all quality and safety parameters.

A new set of wheels must comply with all parameters declared by the manufacturer. This applies to both the bolt pattern and the dimensions of the width and offset of the rim. It is also necessary to select high-quality tires for the season, since inaccurate sizes will negatively affect operation. The drilling parameter determines whether the selected rim can be installed on the car. If the parameter does not match, then it is necessary to use adapter rings, which entails undesirable interference in the factory design.

In any car model, the bolt pattern parameter is designated as PCD, which stands for Pitch Circle Diameter. An extremely simple explanation of the meaning of the term sounds like this: the required number of bolts to secure the wheel and the diameter of the circle on which the holes for them are drilled. The presented indicators are important when choosing a new set of wheels, so that the car owner does not have any difficulties during the purchasing process. Knowing the meaning of drilling, you can choose the most suitable ones from all the wheels available in the store.

Winter tires for Kalina Cross, size 195/60 R15

It is almost impossible to determine by eye what diameter the bolts are located on a particular car, in contrast to the number of fasteners, which can be easily counted. To measure the diameter, you need a ruler, or better yet, a caliper, as well as knowledge of special formulas, which vary depending on the number of fasteners.

It is very important to remember that the incorrect selection of wheels and tires for the Lada Granta can lead to breakdown, increased wear, or even an accident. If, however, a product was purchased with inappropriate fastener sizes, they must be returned to the store and replaced with the correct ones. It is not recommended to use non-corresponding wheels with different spacers for safety reasons.

Disc offset

Disc offset is considered one of the most important geometric indicators. If the diameter of the disc does not match the number of bolt holes or the distance between them, you will not be able to install this disc on the hub. However, a disk with an offset that does not correspond to the standard one (with a slight deviation) is most often easily installed on the hub, and it seems that it performs its functions without any problems. But how safe is it?

Often, sellers in tire stores claim that a slight deviation of the offset from the requirements of car manufacturers is acceptable, and if the wheel assembly is installed on the hub without problems, and when rotating does not touch the suspension and body elements, then this disc can definitely be mounted on the car. Moreover, wheel spacer sellers believe that reducing disc offset is not a problem and does not depend on specific parameters. Their goal is to sell a product: a wheel or wheel spacers, etc. However, you should be more careful and buy something that actually suits you.

Parameters for different brand models

To do this, you need to determine the following basic parameters:

The diameter of the rim, which is measured in inches.
The width of the rim, also measured in inches. Most often for the Civic it corresponds to 6.5.
Wheel offset, measured in millimeters. It is the distance from the vertical axis of symmetry to the plane of contact between the hub and the disk.
The number of holes for fastening with nuts and bolts, or simply a bolt pattern.
Hole for mounting the hub and its dimensions. Designated DIA and is the diameter of the center hole. Also measured in millimeters.

What a bolt pattern on the Grant:

The number of mounting holes and the diameter of their location circle is 4×98.
The diameter of the car's hub is 58.5 millimeters.
The rim diameter is 14 inches.
The rim offset is 37 millimeters.
Recommended width is 5.5 inches.

Lada Vesta wheel bolt pattern:

The rim drilling is 4×100.
Rim width - 6.0J, inches.
Wheel offset is ET 60 millimeters.
The diameter of the central hole is 60.1 millimeters.

"Vesta", wheel bolt pattern 4×100

The rim drilling is 4×100.
Rim width - 6.0J, inches.
Wheel offset - ET 50 millimeters.
The diameter of the central hole is 60.1 millimeters.

The "Kalina" bolt pattern for R14 wheels corresponds to the following dimensions:

The rim drilling is 4×98.
Rim width - 5.5J, inches.
Wheel offset is ET 37 millimeters.
The diameter of the central hole is 58.5 millimeters.