Wheels on the VAZ 2107: sizes and parameters of cast and forged wheels on the VAZ 2107

Car wheels perform not only basic operational functions. It’s hard to imagine the stylish appearance of a vehicle without well-groomed and pleasing wheels. The choice of products on which tires will be installed must take into account a number of factors.

Tuning decisions should in no way be made to the detriment of the technical characteristics of the car. The selection of wheels for a VAZ-2107 will be successful if you take into account a number of technological and design features of the model.

Throughout the entire period of mass production, the VAZ 2107 was equipped with stamped wheels with a diameter of 13 inches (R13) for standard 175//70 R13 tires. Export versions, as an exception, were equipped with light alloy models of the same size.

In addition to diameter, there are a number of other parameters of car rims:

• width;
• bolt pattern;
• departure;
• centering hole.

The standard rim width of the VAZ-2107 of various models ranges from 5 to 5.5 inches. This size is of great importance for the directional stability of the car; the coefficient of adhesion to the road surface depends on it. Symbol: 5.0J or 5.5J.

The bolt pattern in production models is indicated by the symbols 4x98, where 4 is the number of holes for mounting bolts, 98 is the diameter in millimeters of the circle on which they are located. To put it simply, 98 mm is the distance between the central axes of opposite holes. Novice car enthusiasts underestimate another important parameter. The diameter of the hole itself affects the reliability of fastening the wheel to the hub; it must be taken into account when choosing mounting bolts.

Overhang is the distance between the plane of contact of the disk with the hub and the plane that conventionally cuts the rim in the center. There are positive and negative offsets. In the first case, the wheel is recessed into the arch, in the second it is moved towards its outer boundary or even protrudes beyond it. The standard offset of VAZ-2107 wheels is positive and amounts to 29 mm (ET29).

The centering hole for production models is marked with DIA 58.5. The numbers indicate the hub diameter in millimeters. The value of this parameter is important when choosing new disks; if the centering values ​​do not match, a special sealing ring is additionally purchased. The tightness of the fit of the central hole of the disk to the hub is a determining factor; the correct operation of the tires and the absence of “runout” of the wheel depend on it.

What wheels are suitable for the VAZ 2107 in a non-standard version?

Any manufacturer will always recommend for installation as an option exactly the same dimension that he sets himself, since when using it he can guarantee the operation of the car without any risk of mechanical failure.
This means that when developing the model, all calculated loads were taken with these wheels, and other parameters can harm the car. AvtoVAZ allows the following options for replacing disks for the VAZ 2107:

• If a driver wants to change all 4 standard wheels on a car, and their original radius was R13, he should consider “stamping” or “casting” with dimensions of 5.5J × 13 ET32 or 6.0J × 13 ET32, which will be especially convenient for installation of winter tires, which should be slightly wider than summer tires to increase the specific area of ​​adhesion to the road surface. Tires suitable for this size are 175-195/70-80/R13.
• When a car enthusiast prefers a 14 radius, but for some reason he is not satisfied with the factory size, he has the opportunity to use the 6.0J × 14 ET32 size and tires with a width of up to 195 mm and a profile height of at least 60 mm on his Lada. These characteristics are so universal for VAZ that you can install all-season tires on them and not spend extra money on seasonal re-shoes.
• When a car owner sets the radius to R15, he should still adhere to the factory size, changing the rim width to a maximum of 6.5J or the overall tire size to 205/50/R15, since otherwise he will not be able to do without modifications to the suspension, or the deadline car service will be significantly reduced.

Alloy wheels on the VAZ 2107
In some cases, some car enthusiasts prefer to install alloy wheels with dimensions R16 or R17 on their “sevens”, however, this inevitably increases the overall width of the wheel and its offset (ET). This leads to the need to strengthen the suspension elements and the use of low-profile tires, which do not work well on country roads or in winter.

In order to choose the right stamped or cast wheels for a VAZ 2107, drivers should not go beyond the limits of wheel offset ET23-34 mm, width 5.0J-6.5J, and also should not set the radius above 16. In addition, you must carefully observe bolt pattern and drilling pattern upon purchase, as this is the main indicator of compatibility.

Which tire should I choose?

Marking of standard tires on VAZ 2107 is 175/70R13 82T.

“175” — tire profile width;

“70” - the ratio of parameters such as the height and width of the tire profile;

“R” is the designation for a radial tire (note that this is not a radius, as most people incorrectly believe);

“13” is the diameter of its landing (namely the diameter, not the radius);

“82” is the load capacity index, which indicates how much pressure can be applied to each tire;

"T" is the maximum speed at which this tire can be used.

This is interesting: What kind of bolt pattern on Ford

Parameters of forged wheels on VAZ 2107

The most practical and wealthy Lada owners install forged wheels on their cars, which have undoubted advantages over casting and stamping. Forged products, having high strength, weigh much less than analogues made from other materials, and their special structure and hardening method during manufacturing prevent microcracks from forming in the material when hitting a serious obstacle.

Compact wheels - radius R13 and R14 - should be purchased only in the ranges described above: 5.0J-6.0J × 13 ET29-32 or 5.5J-6.0J × 14 ET32, which is suitable primarily for installing winter tires on change to larger rims for high-speed driving around the city on larger wheels.

Important! Most cars produced before 1992 had tube tires, and it will not be possible to save old tires, even if they were just lying in the garage without use, because all the “forging” is oriented exclusively for tubeless tires.

Medium-sized forged wheels are an ideal combination with high-quality 15-radius tires, since the all-season version will allow you to operate the car for many years without worrying about the wheels at all. The permissible size of disks can reach 5.5J-6.0J × 14 ET29-32. Those drivers who dream of wide rims can set the size to 6.5J with a 23 mm offset, but they need to be prepared that the front wheels will definitely catch on the fender liner when cornering.

Forged wheels for "seven"

Forged wheels with parameters R16 and R17 are considered exclusive to the VAZ 2107, which are most often installed on later Lada models, such as Priora, Kalina, Largus and others.

This means that, of course, this drilling and bolt pattern is available on the market, but the small wheel arches of the “seven” can only be used for wheel sizes 6.0J-7.0J × 16-17 ET23-34, and this is the maximum range of parameters.

Please note! It is quite difficult to select such wheels, since they most often have an offset that is not compatible with the “classics”.

With a maximum tire width of 215 mm, the wheels, of course, will look very advantageous on the road, but at the same time they will most likely touch the calipers, which will require their processing, or, conversely, they will protrude beyond the body. In such situations, the driver will have to install additional plastic protection around the perimeter of the wheel arches on the body to prevent it from quickly becoming dirty on a rainy day.

You may be interested in this About the wheel bolt pattern on Opel cars

Those who like to highlight their “seven” in the general traffic flow should be reminded that when installing forged wheels on 17, the maximum profile height is only 40 mm, which is popularly called “insulating tape”. This means that the lack of an air buffer between the rubber and steel on the suspension part of the car often leads to the transfer of vibrations from the road to the hub, suspension, frame and interior of the car, which not only causes driver discomfort, but also reduces the period of maintenance and routine maintenance. repair work.

R17 wheels for "seven"

Selection principles

The selection of wheels is made taking into account the design features of the vehicle and operating conditions, assessing the impact of many factors.

VAZ-2107

on 14 disks it looks more attractive than the standard version, but Honor understands that the new alloy will lead to additional financial costs due to a change in tire size.

A car with 15 rims looks beautiful, but requires the use of low-profile tires, otherwise the tires will rub against the wheel arch protection. Operation in off-road conditions, maximum loading of the trunk with this option is fraught with negative consequences.

Wide wheels with a long offset increase stability, but tend to heavily pollute the car in bad weather conditions. The large curb weight of the car leads to friction between the tires and the fender liners.

The selection of accessories is carried out taking into account the correspondence of the parameters of the tires used to the standard sizes of the wheels. Dimensions of 13 inches exclude the use of wide-profile tires due to the small volume of the wheel arch.

Choosing non-standard wheels means replacing car tires. It is necessary to take into account the acceptable tire sizes for the VAZ-2107 recommended by experts:

• diameter 13-15 inches;
• width 165-185 mm;
• tire profile – 55-80%.

READ Replacing the bearing of the air conditioning compressor Golf 4

Freelance options

VAZ-2107 cars are equipped with stamping, which has certain advantages and disadvantages. Stamped discs serve for a long time and reliably, bend and do not burst upon impact, and can be easily repaired even at home. Such models are easy to use, affordable, and do not attract the attention of intruders. However, the relatively large weight increases fuel consumption, makes acceleration and braking difficult, and creates inconvenience during installation and dismantling.

We recommend: Tire wear indicator: its location and explanation

Innovative light alloy models are divided into 3 categories based on their manufacturing method:

• cast;
• forged;
• prefabricated

Cast ones are made from alloys based on aluminum or magnesium, which allows them to reduce their weight by a third compared to standard versions. The fragility and inelasticity of the material upon impact leads to chips or even bursting of the wheel.

Forged products are distinguished by increased strength and lower density due to hot stamping technology. Deformation requires a lot of force, but the inflexibility of the material forces the suspension to take on the full force of impacts when driving on a bad road.

Prefabricated ones consist of 2-3 segments fastened with bolts. You need to pay special attention to the fastening material. Steel bolts rust quickly, titanium bolts do not corrode. Components can be manufactured using different methods and from different materials. This technological solution makes it possible to reduce weight, increase the interchangeability of parts and the maintainability of products.

Selection of tires and wheels for the VAZ 2107 car

Using automatic selection of tires and wheels for a VAZ 2107 , you can avoid many problems associated with their compatibility and compliance with the recommendations of automakers. This is due to the significant role they play in ensuring a number of operational characteristics of any modern vehicle. In addition, one cannot fail to note the importance of tires and rims as active safety elements. That is why the choice between them should be made as responsibly as possible, which presupposes the presence of a whole range of knowledge about these products. Unfortunately, or, conversely, fortunately, a significant part of car enthusiasts prefer not to study the technical structure of their own car thoroughly. This situation makes the automatic selection system an extremely useful tool in preventing you from making the wrong choice when purchasing tires and rims. And there is plenty to choose from, thanks to the widest range of such products presented in the Mosavtoshina online store.

Wheel disks

A car's wheel rims are part of its suspension. Like any other detail, they have their purpose.

Why are disks needed?

Wheel rims perform several functions at once:

• transmit torque from hubs or axle shafts to tires;
• ensure uniform distribution and compaction of tires around their seating circumference;
• contribute to their correct position relative to the car body and its suspension.

Types of rims

Today, there are two types of rims for car wheels: stamped and cast. The former are made of steel, the latter - from alloys of light but durable metals.

Stamped discs

Each type of wheel rim has its own advantages and disadvantages. The advantages of stamped ones include:

• low cost;
• reliability;
• resistance to shock loads;
• absolute maintainability.

In order to buy a regular “stamping”, just go to any auto store or market. A huge selection, low prices, constant availability on sale - this is what the undemanding car owner needs.

Stamped discs are reliable and maintainable

There is often no need to buy steel wheels, because they are practically eternal. It is almost impossible to break them. The main malfunction of such disks is deformation due to the wheel falling into a hole, hitting a curb, etc. However, this problem is solved by rolling it on a special machine, and at home - by leveling it with a hammer.

A deformed stamped disk can be easily repaired by rolling it on a special machine

As for the shortcomings, there are fewer of them. Basically, motorists note the lack of aesthetics and individuality, as well as the heavy weight, which affects fuel consumption. As for the appearance, indeed, the “stamping” does not differ in either design or attractiveness. They are all the same. But the heavy weight is a controversial issue, since it was taken into account when developing the car, therefore, the engine characteristics are designed for it.

Alloy wheels

Alloy wheels, first of all, give the car its individuality. With them the car becomes more beautiful and looks more modern. It is this factor that most influences the result of the choice between “stamping” and “casting”.

Alloy wheels are lighter and have a custom design

In most cases, car owners, when buying alloy wheels, do not even suspect that such products do not bend like steel ones under critical load, but split. They can, of course, be restored later using argon welding or other technologies, but it will not be possible to return them to their original technical characteristics.

In most cases, restoration of alloy wheels is impossible

Video: which discs are better

Basic parameters of rims for VAZ 2107

Each part of any mechanism has its own characteristics and parameters, according to which it is actually selected. Discs are no exception. These parameters include:

• diameter;
• width;
• departure;
• hub center hole diameter;
• bolt pattern;
• drilling

• 
  Wheels of different cars have different parameters

Find out more about the characteristics of the VAZ 2107: https://bumper.guru/klassicheskie-modeli-vaz/poleznoe/gabarityi-vaz-2107.html

Disc diameter

Diameter is the main parameter that determines the possibility of installing a disk on a specific car. Standard VAZ 2107 wheels have a diameter of 13 inches.

The diameter of the disc determines its size

Naturally, the larger the wheel size, the better the car looks. Moreover, with larger rims, the car “swallows” small holes and road potholes better. On the “seven” you can install wheels no larger than 14 inches in size without changing tires or modifying the chassis.

We recommend: “Kurgan trailers” - quality at a reasonable price

Disc width

The width of the rim, or rather its rim, characterizes the width of the tire that can be used with it. The standard width of the “seven” disk is 5 inches, but parts up to 6 inches wide can be installed.

The diameter and width together determine the size of the disc. In the marking it is designated as follows: 13x5, 14x5, 15x5.5 or vice versa: 5x13, 5.5x14, etc.

The width of the tire depends on the width of the rim

Disc offset

Reach is probably the most difficult characteristic to understand. It determines the distance from the interface plane of the part with the hub to the conventional plane dividing the disk rim in half. Depending on the model, discs can have either positive or negative offset. In the first case, the mating plane of the part does not cross the conventional boundary, which divides it into two equal halves. Looking at a car equipped with wheels with a positive offset, it will seem to you that the wheels of the car seem to be recessed inside the arches. With a negative offset, on the contrary, the mating plane shifts toward the longitudinal axis of the car itself, and the disk “sticks out” outward.

The standard “seven” disk has an offset of + 29 mm. However, for this parameter a standard deviation in one direction or another is provided, equal to 5 mm. In other words, the VAZ 2107 will fit wheels with an offset from + 24 to + 34 mm. The amount of overhang is measured in millimeters and is indicated on the marking as follows: ET 29, ET 30, ET 33, etc.

With a positive offset, the wheel seems to be recessed in the arch, with a negative offset, it sticks out.

Changing the offset value of the “sevens”, most often in a negative direction, is used to give the appearance of the car a sporty style and aggressiveness. But here it is important not to overdo it. The fact is that when the offset changes in one direction or another, the distance between the point of attachment of the wheel to the suspension and the support point on the road surface also changes. And the more the standard distance is changed, the greater the load the wheel bearing will be subject to. In addition, the changes will also affect the car’s handling, and this is no longer safe.

Center hole diameter

Any wheel rim is designed for a certain size of the hub, or rather, its centering flange. It is on this that the disk is mounted with its centering hole. For "seven" discs, the central hole has a diameter of 58.5 mm. In standard labeling this is designated as “DIA 58.5”. No deviations are allowed here, but some tuning enthusiasts manage to install on VAZ 2107 wheels with a smaller hole diameter by boring it, or a larger one by using special centering rings.

Centering rings are used when installing disks with a large diameter centering hole on a car.

Bolt pattern

A parameter such as the bolt pattern indicates the number of holes for mounting the disk and the diameter of the circle along which they are located. The factory 7 wheel rim has four holes for mounting bolts. They are located on one circle, the diameter of which is 98 mm. On the marking the bolt pattern is indicated as follows: “LZ/PCD 4x98”.

As you understand, installing wheels with a different bolt pattern on a VAZ 2107 simply won’t work, especially if its values ​​differ not only in the size of the circle, but also in the number of holes. However, there is a way out, and more than one. The first option is to use special spacers between the disc and the hub. Such spacers have two bolt patterns: one standard for fastening to the hub, and the second for mounting the disk. The second option is suitable only for disks with the same number of bolts and a slight deviation from the diameter of the circle on which they are located. During installation, naturally, problems will arise with tightening the bolts at the final stage. It will not be possible to tighten them completely, which is why the wheel will dangle while moving. But this problem can be solved using special bolts with an offset center. You can either buy them or order them from a familiar turner.

The bolt pattern includes the number of mounting holes and the diameter of the circle on which they are located

Sverlovka

Such a parameter as drilling is necessary so that the car owner, when buying wheels, does not make a mistake with the size of the mounting holes. If they are larger than the diameter of the bolts, the disc will not fit tightly and will begin to wobble over time. If they are smaller, the bolts simply will not fit into the holes. The diameter of the holes for the mounting bolts in the standard 7 wheels is 12.5 mm. For fixation, M12x1.25 type bolts are used.

Drilling determines the diameter of the disk mounting holes

Which cars will fit wheels on the VAZ 2107?

Unfortunately, there are very few cars that have the same wheel parameters as the 7. VAZ 2107, in this sense, is almost unique. And it’s not at all about their diameter, width, or reach. It all comes down to the bolt pattern and the size of the hub hole.

Table: cars with similar wheel rim parameters

As for domestic cars, standard alloy wheels from VAZ 2112, VAZ 2170 can be installed on the “seven” without modifications. They have similar parameters.

We recommend: How to decorate a wedding car?

But you don’t have to waste time searching for suitable stock drives. Today you can freely buy wheels of a wide variety of designs, made from various alloys. The cost of a set of good “wheels” for a VAZ 2107, depending on the characteristics and manufacturer, varies from 10 to 40 thousand rubles. Not cheap, of course, but beautiful.

Is it realistic to install sixteen-inch wheels on a VAZ 2107?

Probably, everyone who had to see the “seven” on sixteen- and even seventeen-inch disks was very interested in how they were “dragged” there. It's actually simple. In some cases, the owners of such cars do not even digest the arches. It's all about the height of the tire, which is expressed as a percentage of the height of the rubber profile to its width. And if for a stock tire it is 70%, then in order to put fifteen-inch wheels on the “seven”, you need to put rubber on them with a height of 40–50%.

When installing larger diameter wheels on a VAZ 2107, low-profile tires are used

To install sixteen- and seventeen-inch wheels, it is better to raise the car a little using special spacers for shock absorbers, or increase the size of the arches by cutting them out. As for the tire profile height, it is better if it is no more than 25%.

Video: VAZ 2107 on seventeen-inch wheels

A bolt pattern is...

Bolt pattern (drill pattern or PCD) is a measurement that includes the number of bolts and the diameter of the circle between the mounting holes for vehicle rims. These parameters differ for each brand and model. The exact number of mounting bolts can be determined visually.

The Lada Granta bolt pattern process

You can measure the radius or diameter of the circle on which the holes are located using a ruler or caliper. To do this, choose the 2 most distant from each other. This method is convenient for an even number of fasteners (4, 6 or 8).

Another way to determine the diameter when fitting tires is to measure the distance between 2 adjacent holes. Then the resulting number is multiplied by a coefficient depending on the number of bolts. For 4 bolts it will be 1.414, for 5 – 1.701, for 6 – 2.

In this case, it is necessary to measure as accurately as possible - an error of 1-2 mm can lead to incorrect selection of wheels and problems with the chassis. To determine the bolt pattern indicators of each Granta model, special article tables have been compiled. This information can also be found in the vehicle's owner's manual or by examining the labeling.

Knowing the exact wheel bolt pattern data on the Lada Granta will help you avoid problems when purchasing.

VAZ products are equipped with three types of disks:

• Stamped - the most popular among car owners. They are durable, easy to straighten and have a low cost. Most often they are installed on stock cars and are covered with caps.
• Cast - they have less weight and look attractive. Among the disadvantages are a higher price and less durability.
• Forged - they are the most durable and durable.

When choosing any type of disk, the standard standards specified by the manufacturer are taken into account. The Lada Granta bolt pattern for all modifications and body types has the characteristics of 4x98. The first number indicates the number of bolts, the second is the diameter of the hole.

Does it depend on the size of the disks?

The Granta range is available with wheels with a diameter of 13, 14 or 15 inches. The exact figure depends on the configuration and year of manufacture of the car. The bolt pattern of the Lada Granta always remains the same - 4x98.

Acceptable parameters of non-standard disks

Tuning of the VAZ 2107 is carried out based on the design parameters of the car. The pursuit of stylish design should not be in dissonance with the requirements of safety and comfort.

The table below illustrates some selection criteria (standard indicators are highlighted in bold):

WheelTire Bolt patternPressure, bar

The central hole for the VAZ 2107 should have a diameter of 58.5 mm. The use of larger discs is possible using a special adaptive ring.

Connoisseurs of extreme design and low profile should take into account the permissible limits of experimentation:

• disc diameter from 13 to 15 inches;
• reach 24-34 mm;
• rim width 5-6 inches;
• central hole 58.5 mm;
• The bolt pattern is strictly 4x98.

When choosing an offset, you need to remember that wide rims require a smaller offset value.

In exceptional cases, extreme sports enthusiasts install products with different bolt patterns and central holes, but this is possible when replacing individual parts of the car (hub, brake drum). Experts do not recommend making changes to the design features of the car.

Knowledge of the design features of the VAZ-2107 and compliance with technical operation standards allows you to choose attractive wheel models without reducing the technical characteristics of the car and threatening driving safety.

Answers (2)

Follow the answers to this question

• Bolt pattern 4X98.

  Petr Expert The future lies with AvtoVAZ!

  10/12/2014 at 18:00

• During its existence, the VAZ 2107 was equipped only with 13-inch stamped wheels. The tires had the following parameters - 175/70 R13.

  Wheel sizes - the most important parameters: bolt pattern 4X98, offset ET 29, width - 5.0J, centering hole CO 60.1

  wheelman I know everything about tires and wheels

  10/12/2014 at 18:08

Similar questions

This is interesting: When do you need winter tires in Finland?

Compatibility of VAZ 2107 on wheels with other Lada models

The drilling rate of 58.5 mm and the bolt pattern of 4x98 mm are ideally combined with all other VAZ models with the exception of the Niva, which has moved from the category of compact runabouts to SUVs. However, it should be taken into account that on all later car models, starting with the VAZ 2108 and 2109, the width of the wheel arches changed slightly, as well as a different suspension design was used.

So, disks from the “nine”, of course, can be installed on the “seven”, but here you should remember about the important indicator ET - the offset of the disk relative to the point of its attachment to the hub, namely, when this dimension in the VAZ 2107 is from 23 to 34 mm , the VAZ 2109 fits wheels with parameters of 35-40 mm, and some products may not be compatible with the technical characteristics of the “Seven” body.

In conclusion, car enthusiasts should be reminded that the “Seven” has not left assembly lines for 6 years, and the newest modification is the same age. This means that its value on the market cannot exceed 200 thousand rubles. as of the end of 2021, and good forged wheels with radius R16 and R17 have a price of 10 thousand rubles. per wheel, which in combination with high-quality tires can exceed 30-35% of the cost of the car itself.

Wheel caps for VAZ 2107

Therefore, when operating such vehicles, the most optimal solution would be to install inexpensive stamping with factory specifications and cover it with simple caps made of plastic or rubber, and the VAZ 2107 wheel rim will look as impressive as the car brand can allow, and the driver will not have to select an exclusive one according to compatibility.

Features of wheel sizes for the most popular VAZ models

Among several dozen VAZ modifications, the most popular models over the entire 50 years were only 2 of them, as can be judged by the number of copies sold. The wheel sizes for these cars had the following parameters, which varied depending on the year of manufacture, technical equipment and equipment of the car:

• VAZ is the latest modification of the “classic”, produced on the plant’s conveyors for 30 years: from 1982 to 2012. During this time, it never changed its appearance, and bolt pattern
  was the same - 4x98 with a central hole diameter of 58.6 mm.

If in 1982 the plant produced models with tire dimensions ranging from 5J to 5.5J, then at the end of production the concern increased the permissible size to 6J.

The radius of the wheels invariably varied from R13 to R15, which made it possible to alternate them by season, periodically changing the side profile of the tire, or immediately use all-season tires with a diameter of R14.

VAZ tire size 2107

invariably amounted to only 3 main parameters - 175/70/R13, 185/60/R14 and 185/55/R15. The last of the listed parameters was actively in demand among lovers of fast driving on smooth city roads.

READ Lambda probe readings at idle

If we look at the concern’s earlier cars, we can see that the wheelbase of the Zhiguli has remained virtually unchanged for more than 40 years. This leads to moral backwardness of the technical equipment of the plant's products. At the same time, the lack of new developments greatly reduces both the speed of release from the assembly line and the cost of engineering equipment, which leads to a very attractive retail price for the vehicle.

• VAZ 2114. Produced in a smaller range - from 2001 to 2013. The car was just a restyled modification of the classic “nine”. The legacy of the outdated model did not affect the high popularity of this Lada, and all the wheels that were installed on hubs in the basic version had the same traditional bolt pattern 4x98, DIA 58.6 mm.

European standard bolt pattern 4x100 for Lada X-Ray

• Like the bolt pattern
  of the VAZ 2114, the width of the wheel rims was not much different from the “seven” and fluctuated between 5J – 6J for the entire production period. As for radius, the concern has completely eliminated the 15-inch diameter from the factory equipment, without prohibiting drivers from installing this parameter as an option. The bolt pattern of VAZ 2114 wheels in the current size also made it possible to install standard 4x100 wheels in accordance with the sizes usual for Europe.

Not a single Lada model has ever looked aggressive; the hallmark of the product was practicality and reliability in operation. The concern did not use extreme overhang indicators, and the wheels were always hidden under the body arches. The average ET limit values ​​for both VAZ 2107 and 2114 were ET25...35 mm, and deviations from this characteristic obligated drivers to install additional mudguards on the side parts of the body and change the design of the hubs, making them more durable to avoid deformations.

Minimum and maximum possible parameters of non-standard disks

So, the smallest disk diameter provided by the VAZ-2107 manufacturing plant is 13 inches. The maximum size should not exceed 15 inches, provided that low-profile tires are available.

The wheel rim must either correspond to the parameters of the VAZ-2107 hub according to PCD - 4x98 mm and according to DIA - 58.5 mm, or its installation will require the use of special adapter spacers. The product with PCD – 4x100 mm can be installed using fasteners with an eccentric.

You can try to get around the 5J-6J rim width limitation by changing the “ET” value. The use of spacers will reduce the size of the offset, which will allow the installation of wider wheels. But the question immediately arises about the appropriateness of these actions.

Giving a more modern look to any older car model is quite appropriate and acceptable in most cases. Changing disks in this sense is no exception. However, if you are carried away by tuning the VAZ-2107, you should not forget about the technical characteristics.

Any re-equipment must be accompanied by an improvement in both appearance and performance. Or at least you should try not to spoil what was originally there.

Sources

• https://kolesa.guru/diski/i-na-vaz-2107.html
• https://zapchasti.expert/kolesnye-diski/diski-na-vaz-2107.html
• https://mosautoshina.ru/auto/vaz/2107/
• https://bumper.guru/klassicheskie-modeli-vaz/kuzov/diski-na-vaz-2107.html
• https://kolesospec.ru/diski/modeli-avto-diski/diski-vaz-2107.html

Standard disk sizes VAZ 1.6i 2107x

The VAZ 2107 1.6i 2107x model was produced from 2002 to 2012. Table of standard and suitable wheel sizes for VAZ 2107 1.6i 2107x.

Disc drilling parameters are usually called bolt pattern:

• LZ (number of holes)
• PCD (hole center circle diameter)
• ET (disc offset)
• DIA (hole diameter)