VAZ 2114: where is the cabin filter located - types of filters, what is an adapter?

Owners of VAZ 2114 cars often complain about the carelessness and short-sightedness of the domestic manufacturer. In their opinion, some systems of the fourteenth Samara model have specific shortcomings. Take, for example, the cabin filter of a car, which receives the most complaints. It consists of a strip of filter material placed between two plastic grids. The configuration of such a flimsy filter is capable of retaining only the largest debris, allowing all other small particles of dirt and various gaseous compounds to enter the cabin.

Of course, given this state of affairs, any VAZ 2114 car owner will dream of installing a normal cleaning element. And this can be done, but first you should take care of purchasing a cabin filter adapter. This is exactly what we will talk about in our article. You will learn what functions it performs and how you can make it yourself.

What does the cabin filter adapter look like and what functions does it perform?

Cabin filter adapter with a filter installed in it (new model) from VAZ-2110
The cabin filter adapter allows you to install a modern cleaning element in your car, which will retain dust and prevent it from settling on the inside of the windshield, dashboard and interior trim.

The product is a modernized casing for the cabin ventilation system with the function of integrating a cabin filter from VAZ 2110 cars. It has a detachable metal structure, consisting of two parts - front and rear, into which the filter is installed. The joints of both parts of the adapter are sealed with rubber gaskets, which improve the tightness of the structure and prevent moisture from entering the interior blower fan. The lower plane of the adapter is also treated with the same seal. The sides of the front part are responsible for keeping the filter dry when it rains or when washing the car. The location of the adapter in the car ensures that the filter is installed forward in the direction of travel of the vehicle. This orientation of this design allows the installation of a pleated cabin filter of the tenth Samara family. At the same time, removal and installation of the filter component for its periodic cleaning and replacement can be done in a few seconds. The adapter can be installed on cars with various modifications of the standard casing, and all thanks to the universal fastening of the adapter. There is no need to remove the heater fan during installation.

Advantages of the VAZ 2110 cabin filter

Carbon and anti-allergenic dust filters for VAZ-2108, -2109, -21099, -2114, -2115 (Samara family) VAZ 2110 cabin filter It is
not for nothing that we say that it is better to install a filter of the tenth Lada family on a VAZ 2114 car. A reasonable question arises: what are its advantages over the “Samarov” filter?

Even if you just look at these two filter elements, you can already see that the working surface area of ​​the VAZ 2110 interior compartment is much larger than that of the Samarovo one. To be more precise, 6 times. This configuration of the cabin filter allows, with significantly lower air resistance, to improve the filtration of polluting particles through more dense packing of the paper element. According to filter manufacturers, the efficiency of filter material in filtering out dust particles up to 1 micrometer in size is 95%. Mechanical contaminants measuring 2 micrometers are retained by 98%. Thus, installing an adapter can allow you to enjoy all the benefits of a modern cabin filter without significant loss of air volume.

Why is replacement needed?

The main reason for replacing the cabin filter is dust. The most active period of pollution is summer and spring. The weather is dry, and therefore a very large amount of dust forms on the roads and on the street.

Obviously, the replacement is carried out in order to increase the efficiency of cleaning the air that we breathe while inside the car. If you ignore the need to change the filter element, you will soon begin to inhale large amounts of dust and microparticles that can cause diseases of varying degrees of complexity.

Young children can develop serious allergies if they constantly drive a car with an old cabin air filter. Therefore, this is primarily a health issue.

Price issue

This entails the need for certain costs to purchase two filters per year. But there is no need to worry, since the price of a regular filter component is only 150 rubles. A higher quality carbon filter costs a little more - 300 rubles. It's a small price to pay to stay healthy and comfortable inside your car.

Where can I get a cabin filter adapter for a VAZ 2114?

You can purchase a cabin filter adapter for a VAZ 2114 in three ways.

The simplest of them is purchasing a product in an online store. For example, on the website adaptech.spb.ru/order.htm they offer to purchase an adapter for only 1,600 rubles.

The advantages of this method: The original adapter is much better - thick metal, powder paint.

Cons: Painfully expensive delivery, and the price is too high.

The second way to acquire a treasured item is to buy it through the same ubiquitous Internet from the St. Petersburg Samodelkins.

The advantages of this method: Low price

Cons: You can also get confused yourself.

Well, and finally, the third way to get the desired spare part is to make your own interior adapter.

The advantages of this method: Savings and a sense of personal satisfaction from the work done to improve your “pelvis”.

Cons: 8 hours of effort and preliminary preparation of the necessary materials.

But we are not afraid of difficulties, right? And we can modernize our bird ourselves in our garage. And with the money saved, we’d better buy a new carbon filter from the “ten”.

Adapter

Alas, the quality and efficiency of the standard cabin filter provided for the VAZ 2114 leaves much to be desired.

Essentially, it is a strip of filter material that is located between two plastic grilles. The effectiveness of this design is insignificant, which forces car owners to take certain measures.

The best measure is to install a filter adapter. Making it yourself is not difficult, although there are other ways to obtain this design.


Adapter drawing example

Thanks to the adapter, it becomes possible to install a truly effective air purifier for the cabin, which retains the smallest particles and does not allow the driver and passengers to breathe dust.

Externally, the adapter is an improved housing for the interior ventilation system with a filter built into it. The design consists of two elements - the rear and the front. A filter is inserted into the rear component, and the joints between the adapter parts are sealed with rubber gaskets. This ensures the necessary tightness. The design nuances will allow you to avoid moisture penetration even when washing the car.

Article on the topic: Fog lights on the VAZ 2114: installation and connection diagram

When planning the installation of the adapter, experts strongly recommend using a pleated cabin filter borrowed from the VAZ 2110.

The simplicity of the adapter design makes it possible to replace the filter with your own hands in the shortest possible time. And during installation you do not have to remove the heater. So this is an ideal solution to significantly improve the ventilation system of your VAZ 2114.

Options for obtaining an adapter

If you have made the right decision that you want to get an adapter for your VAZ 2114, you need to decide how exactly you will get it.

There are three main options for this.

Option Advantages Flaws
Buy a device in the online store You get a high quality device, made of thick metal and powder coated The high cost of the product itself, plus equally expensive delivery
Order from those who make them with their own hands The purchase will be much cheaper compared to an online store If desired, you can make such a device yourself, spending only on consumables. Quality may be poor
Do it yourself Significant financial savings, the ability to produce a truly high-quality adapter. You will know what it is made of and how You will have to spend a lot of time and effort on manufacturing

You should start making your own adapter only if you are completely confident in your own abilities. Spend the money you save on purchasing a high-quality carbon filter from a VAZ 2110.

Making the adapter

The instructions for creating an adapter with your own hands are quite simple. Another question is how accurately you can implement your plans.

  1. Find diagrams to create an adapter. Now there are many of them on the Internet. Just keep in mind that you need an adapter specifically for the VAZ 2114.
  2. Make a layout out of paper so that you understand exactly where each part goes and how they are connected to each other.
  3. Stock up on the required amount of stainless or galvanized steel. Some people use plastic, but it is a little more difficult to work with, plus it can cause problems when getting bends.
  4. Cut out the necessary adapter elements from the material, guided by the drawing and layout.
  5. Use a vice and mallet to make bends. The walls will be thin, so do not use a metal hammer. It is better to take a wooden or rubber mallet.
  6. The parts are connected using M3 bolts or rivets.
  7. The advantage of rivets is that you do not need to drill holes in the metal. But they also have a drawback - a high probability of damage to a thin sheet of metal.
  8. At the last stage, carefully treat all joints, connections and holes with sealant. This will allow the structure not to make unnecessary noise while driving.

Article on the topic: Replacing the oil pressure sensor on a VAZ 2109


Finished design

The manufacturing process will take at least 6 hours. Plus, you will additionally have to spend time studying diagrams, drawings and creating a layout. So be patient.

Step-by-step instructions for making a cabin adapter

  • So, before you start working with metal, you should make templates for parts from paper. We print out drawings of the parts of the structure and glue them together. Here's what we got:

Printed from Compass 3D V12 1:1

  • After this, we take the resulting stencils, metal scissors and cut out the galvanized parts.
  • Next, we bend the parts in a large vice, using a wooden mallet so as not to spoil them.
  • Then we drill holes with a drill, metal drill bit 3.
  • We fasten the parts with M3 bolts.
  • Next, you can install our craft. First, the part for the motor. Then on top is the part with the frame for the filter.
  • To make installation easier, the plastic grille to protect against leaves was removed.
  • We treat the adapter itself with glass sealant, carefully coating all the cracks and joints so as not to siphon, otherwise the whole point of the installation will be lost.
  • We also treat the places where the adapter comes into contact with the car body with auto sealant (silicone will not work)
  • The final touch is a rubber seal on the top of the adapter to protect the hood trim.
  • Now you can install a cabin filter of the new tenth sample.

Bottom line: if you wish, you can also paint the resulting upgrade and begin to fully enjoy the clean air of the cabin!

Installing the adapter and filter

Well, now you can proceed directly to installing the entire structure with a new effective carbon filter.


Installation with adapter

  1. Wait for the sealant on your adapter to dry completely.
  2. Select a cabin filter that suits your requirements or financial capabilities.
  3. When choosing between a reusable and disposable filter, experts advise choosing the latter. Although reusable ones can be cleaned, disposable ones have a long service life, plus the cost is significantly lower. Buying reusable filters is an imaginary savings that negatively affects the quality of air purification.
  4. Remove the old filter. To do this, you need to lift the hood and disconnect the rubber seals from the clips.
  5. Using a screwdriver, remove the mounting screws and remove the plugs.
  6. Remove the frill.
  1. Remove the mesh from the plastic element.
  2. Take out the old filter.
  3. Clean the seat so that your insert fits firmly and securely.
  4. Treat the adapter with glass sealant, taking care to seal all cracks. Otherwise there will be no point in installing it.
  5. The installation sites, or rather the contact between the adapter and the body, must be treated with automotive sealant. Just don't use silicone compounds.
  6. Next, install the rubber seal over the adapter, which will protect the hood trim.
  7. Insert a brand new cabin filter into the stainless steel structure.
  8. Perform the reassembly procedure.

The new type of filters are designed for approximately 30 thousand kilometers. But if the operation of your car involves regular driving on dusty roads, it is better to change it more often - twice a year.

Such modernization of the air purification system in the VAZ 2114 cabin significantly increases its efficiency. You breathe truly purified air and stay healthy.

Unfortunately, many consider this an unimportant point. But when every time you get into the car, you start coughing, sneezing or choking, inhaling dust, you will probably think about the need to change not only the filter, but also install an adapter for it.

Rating
( 1 rating, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]