Geometric dimensions of the VAZ 2110 body according to control points

Rating:

Tags:VAZ 2110/2111/2112Body geometry

VAZ 2110 cars that leave the factory assembly line have clearly verified body dimensions. However, few people pay attention to them when buying. As a rule, a driver begins to become interested in the dimensions of the body of his car in the following cases:

With proper body repair, geometric dimensions can only be checked by taking measurements

1. There are plans to buy a car of this brand second-hand, but the buyer wants to make sure that the vehicle has not been in an accident before. Body geometry will help answer this question.
2. The driver himself got into an accident. This could be a collision with another vehicle or a tree, curb, wall, etc. Body repair materials will be needed. In addition, the driver will need to select tools (for example, find out the dimensions of the slipway for body repair).

Dimensions of the engine compartment of the VAZ 2110

The question arose about replacing the TV (s/o) with a VAZ-2110, as there was great sadness. Like everyone else, in order to save money, as well as gain experience, it was decided to do it yourself. The question arose about the geometric dimensions of the engine compartment. I found a couple of diagrams on the Internet

Comments 18

I also need sizes to check, so which ones to use!

I made it approximately according to my measurements

You probably haven’t been here for a long time) I’ve already done and sold the car! I won’t edit the blog anyway!

Yes, I already made mine too. But this recording will still be useful to someone

Wow, I should try to measure it)

Didn't take any measurements? Otherwise, in just a week I’ll go on vacation, and I’ll start doing shamanism a little

Not yet, I won’t get around to it, but I’ll definitely write back if I intend to)

I would be very grateful

Vitaly Kakhovka on YouTube did the 10th family in the video everything is there

Thank you. Let's take a look too

A1=119.5 A2=119.5 B=127 B1=46 B2=46 D1=49.5 D2=49.5 D=96))) my TV is further welded

Thanks Slav. We will still wait for at least a couple of measurements to choose the “golden mean”, so to speak.

Thank you for your quick help in measurements pandaaaaaaaaaaa And so here are his measurements: A1=118.5 A2=118.5 B=127 B1=44 C2=44 D1=48.5 D2=48.5 D=95.5 Thanks to him It seems that the dots are not seriously gone, +- 0.5 cm

Thanks for the sizes, I couldn't find them anywhere. According to these dimensions, they are one to one + -5 mm (as they measured with a tape measure) But between the glasses (shock absorber rod), according to the book there should be 1103 mm, but for me it is 1003 mm. I don’t understand how this happens((

I won't even give you a hint.

Thank you for your quick help in measurements pandaaaaaaaaaaa And so here are his measurements: A1=118.5 A2=118.5 B=127 B1=44 C2=44 D1=48.5 D2=48.5 D=95.5 Thanks to him It seems that the dots are not seriously gone, +- 0.5 cm

Is this the exact size?

Depends on what. You can choose a middle ground. There is generally little information about the VAZ-2110

I'll write first. My sizes may differ radically from yours, since I measured the points as I currently have them. And so: A: I couldn’t measure it because of the installed 3 liter receiver. B: 126.5 cm. B: left - 45 cm, right - 45 cm. (right and left, as look at the picture) D: L - 48 cm, R - 48.5 cm. D: 95.5 see. Feel free to write measurements, I really need them. It took me a maximum of 1 minute of my time. Thanks everyone for your help

Cars coming off the assembly line have strictly verified body dimensions. As a rule, no one pays much attention to this when buying a new car.

However, the need to measure and check the geometric dimensions of the VAZ 2110 body with the instruction manual may arise in the following cases:

• you buy a car second-hand and are not sure that it has not been in an accident. It is because of this that, as a rule, the geometry of the VAZ 2110 is most often violated;
• you yourself got into an accident, even ran into a stone, curb, etc., causing the car to receive a serious blow.

Basic reference dimensions of attachment points for components and assemblies

Stories from our readers

“Fucking basin. "

Hi all! My name is Mikhail, now I’ll tell you a story about how I managed to exchange my two-wheeler for a 2010 Camry. It all started with the fact that I began to be wildly irritated by the breakdowns of the two-wheeler, it seemed like nothing serious was broken, but damn it, there were so many little things that really started to irritate me. This is where the idea arose that it was time to change the car to a foreign car. The choice fell on the melting Camry of the tenth years.

Yes, I had matured morally, but financially I just couldn’t handle it. I’ll say right away that I am against loans and taking a car, especially not a new one, on credit is unreasonable. My salary is 24k a month, so collecting 600-700 thousand is almost impossible for me. I started looking for different ways to make money on the Internet. You can’t imagine how many scams there are, what I haven’t tried: sports betting, network marketing, and even the volcano casino, where I successfully lost about 10 thousand ((The only direction in which it seemed to me that I could make money was currency trading on the stock exchange, they call it Forex. But when I started delving into it, I realized that it was very difficult for me. I continued to dig further and came across binary options. The essence is the same as in Forex, but it’s much easier to understand. I started reading forums, studying trading strategies. I tried it on a demo account, then opened a real account. To be honest, I didn’t manage to start earning money right away, until I understood all the mechanics of options, I lost about 3,000 rubles, but as it turned out, it was a precious experience. Now I earn 5-7 thousand rubles a day. I managed to get the car buy after half a year, but in my opinion this is a good result, and it’s not about the car, my life has changed, I naturally quit my job, I have more free time for myself and my family. You’ll laugh, but I work directly on the phone)) If If you want to change your life like me, then here’s what I advise you to do right now: 1. Register on the site 2. Practice on a Demo account (it’s free). 3. As soon as you get something on the Demo account, top up your REAL ACCOUNT and go to REAL MONEY! I also advise you to download the application to your phone, it’s much more convenient to work from your phone. Download here.

Deformed areas of panels are straightened, as a rule, manually using special tools (metal, plastic, wooden hammers and various mandrels) and devices. Straightening with heating is used for upsetting (pulling) highly stretched surfaces of panels. To prevent sudden swelling and deterioration of mechanical properties, the panels are heated to 600-650°C (cherry-red color). The diameter of the heated spot should be no more than 20-30 mm.

Factory dimensions

All linear dimensions of the VAZ 2110 body can be found by looking through the instruction book or rummaging around on the Internet.

But the main dimensions are:

• if we take the end points of the front and rear bumpers, then here we have 4265 mm;
• length between the centers of the front and rear wheels, the so-called. wheelbase is 2492 mm;
• from the center of the front wheel to the extreme point of the front bumper - 829 mm;
• from the center of the rear wheel to the end point of the rear bumper - 944 mm.

The height of VAZ 2110 is 1420 mm.

Factory dimensions for length and width

• in front at the extreme points of the “factory” mirrors – 1875;
• front excluding mirrors (purely hardware) – 1680 mm;
• distance between the centers of the front wheels – 1400 mm;
• the rear of the car has a width between wheel centers of 1370 mm.

Length

The geometry of the VAZ 2110 body is described in the operating instructions. The main parameters for checking body geometry are as follows:

1. There should be 4.265 meters between the extreme points of the front bumper and the rear bumper.
2. The distance between the center of the front wheel and the center of the corresponding rear wheel is 2.492 meters.
3. The distance from the center of the front wheel to the end point of the front bumper is 0.829 meters.
4. The distance from the center of the rear wheel to the end point of the rear bumper should be 0.944 meters.

The height of the car is always stationary - 1420 mm

You should try to avoid welding and other work that involves thermal heating of the metal.

Instrumental check by checkpoints

And yet, things are not always so simple. And even an experienced eye will not always notice small “inconsistencies”. With proper body repair, the geometric dimensions can only be checked by taking measurements. Professionals use special meters for this.

But to carry out this procedure at home, an ordinary tape measure is sufficient. You need to find special control marks that are located on the bottom of the VAZ body. It is from them that measurements should be taken. How and in what sequence can be found in the operating instructions for the VAZ 2110.

If, say, you need to make sure that the linear dimensions of your particular car (for example, you changed the wings, door, etc.) match, then you should not always trust even the operating instructions; sometimes you can find errors there too.

As control dimensions of the body, use the dimensions you personally took from the side of the car where no replacements or straightening were carried out.

Check points on the body and underbody

It is necessary to take measurements at the following points:

1. Diagonal. Before measuring body dimensions using reference points, you can take just two measurements that will help clarify the picture. Drive the car onto an overpass or pit and use a tape measure from below to measure the dimensions diagonally. They must match, as they say, neck to neck. Match up? Great, but don't stop there;
2. Racks. You definitely need to check the racks. First - from the unbeaten side (if such is known), then - from the bat. In principle, in this case you can choose any body points (the main thing is that they are the same on both sides). For example, from the pillar to the edge of the bend on the rear doors. Also on the front ones. The sizes match - great. Let's move on;
3. Roof. To make sure that the roof of the VAZ 2110 does not “sink”, you need to measure the dimensions of the door diagonals - from the lower rear corner diagonally to the upper front corner. Naturally, the dimensions on both sides should be the same. In addition to this, it is advisable to measure the diagonals of the roof itself;
4. Windshield. For some reason, many people believe that if the windshield “fits” normally, then control measurements are not needed, they say, the geometric dimensions of the body are in order. This is mistake. You need to measure - moreover, diagonally, and choosing points at the same distance on both sides.

Body geometry and its diagnostics

ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline! Read more"

The most important components of body geometry are called control points. It is the knowledge of their location and the ability to correctly measure the distances between them that determines the structure of checking the body for deformation. You can learn more about control points from the technical documentation for each car model.

VAZ 2110 body dimensions

After identifying damage, the integrity of the body is usually restored in special workshops. Experienced straighteners bring the body back to normal in the shortest possible time, if only the deformations are of moderate or minor severity. A body that has been in a serious accident and has received a lot of deformation is usually easier to replace with a new one.

What deformations can occur on the VAZ 2110?

VAZ 2110 control body dimensions

The “Ten” involved in the accident will have certain deviations from the standard positions marked at the factory. And destruction in this case means the following:

• Deviations in terms of the standard wheel arrangement, as evidenced by poor vehicle stability and increased tire wear;
• The diagonals, again, standardly installed at the factory, are violated. Doorways, pillars and other areas of the body, one way or another, associated with the impact zone are especially often affected.

Body geometry dimensions of the VAZ 2110 after the accident

In most cases, the destruction of functional elements is associated with the appearance of folds in the floor or other components of the body. In addition, external impacts cause a significant increase in the part in areas far from the point of impact.

Note. Such structurally weak areas include empty spaces between welds, side members and other elements where free mutual movement of metal sheets is observed.

Several ways to check the body for deformation

You can determine the deformation of a body that has been in a moderate accident at first glance. On the contrary, if the blow was weak, then it can be extremely difficult to determine the damage by eye. In this case, you have to carefully carry out diagnostics, measure compliance, and so on.

VAZ 2110 body geometry dimensions and tools

A hydraulic jack helps to carry out an initial inspection of the car. Thanks to the lift, you can examine the condition of the floor, feel those parts of the body that are inaccessible for inspection with the normal position of the car, for the presence of folds. After detecting the latter, as a rule, they are marked with a marker, which makes it possible to easily find deformed areas during subsequent stages of work.

If such a check does not give any results, proceed to the next stage of the examination, which involves checking the wheels. It is no longer a jack, but a special stand that helps carry out the check. Using such equipment, it is easy and faster to carry out the second stage of diagnostics. Check the front and rear wheels of the car at control points using calipers with a special profile shape.

Geometry and body dimensions of the VAZ 2110: measuring setup

Checking the compliance of the control points of the “shoes” of the car involves verification (comparing) the wheel coordinates located on one side of the car with the coordinates on the other side. Body deformation becomes obvious if measurements show significant deviations from specified standards.

Another method of diagnosing damage to the “tens” body is to compare the diagonals. The exact coordinates of the main diagonals are given in the table below. This diagnosis is considered the most correct, since it is carried out using a symmetry check.

Body geometry VAZ 2110 dimensions via computer

Modern technologies make it possible to check body geometry using various tools. A computer on which appropriate measurements are carried out helps a lot in this matter. The option of checking using template tools and mechanical measurements is also used.

As a rule, at home on a VAZ 2110 you can remove the geometric dimensions of the body yourself using a standard tape measure. But at the service station, a special telescopic ruler is already used for the same purpose, which gives more accurate results.

VAZ 2110 body dimensions and geometry

But both of these measurement methods have a significant drawback. Thus, they do not make it possible to measure spatial deformations. The latter can only be diagnosed using template or computer methods. This will give a complete picture of the deformations, which will allow the damage to be eliminated most effectively. Although, the price of such a check will be many times higher.

The car body is an intricate and complex structure that has a number of values ​​required for normal operation. Their violation causes significant deviations, the configuration of the entire body changes. By measuring the geometry of the body, the car owner has the opportunity to detect even the most minor defects, which can lead to big problems in the future.

Body geometry dimensions of the VAZ 2110

Subtleties of body repair

Body repairs are most often carried out after an accident, but also if some parts are rusty. But you should still try to avoid welding and other work that involves thermal heating of the metal.

Small scratches and chips can become a source of corrosion in the future. In order to avoid this, it is best to tint small defects. Details: https://vazweb.ru/desyatka/obschee/kak-podkrasit-skolyi-na-mashine-samomu.html

If possible, try not to remove bezels. This can also lead to changes in body geometry. And after any repair work related to the body, be sure to check its linear dimensions.

1. we need control dimensions of the engine compartment for the VAZ 2110-12. Question from: Ilya Koloskov 2. Who knows how to connect an additional output, thick black wires on the Centurion 20 signaling Question from: Ivan Morozov. Dimensions of the engine compartment of the VAZ 2110.

Similar articles

10 comments on “Dimensions of the engine compartment of the VAZ 2110. We need reference dimensions of the engine compartment for the VAZ 2110-12”

2. These are the power input and output of a normal open relay (built into the unit), if you connect ground or “+” to one wire, respectively, when this channel is activated, ground or “+” will appear on the second wire

Repair of Zhiguli in Rostov-on-Don

This car is familiar to everyone. For some, this is the first car in their life, but for others, it is a reliable friend forever. Cars of this brand have their own characteristics, and if you need high-quality and fast repair of your Zhiguli, contact our technical service “Body Rostov-on-Don” for help!

Our center’s specialists provide a full package of bodywork: major body restoration, straightening, painting of individual parts and even stylish airbrushing! For all types of work you will receive a long-term guarantee, as well as a high discount! Here you will find a large selection of original spare parts and accessories.

The friendly team of the Kuzovnoy Rostov-on-Don service will answer all your questions and provide reliable and effective service for your car!

Attention! Prices are presented for Golf cars and are indicative. The final cost of the work can be found out after an assessment by a specialist.

Our services

• Body repair
• Body repair after an accident
• Car painting
• Bumper repair and painting
• Repairing dents, scratches and chips on the body
• Car body polishing
• Selection of paint for cars
• Airbrush
• Free tow truck
• Free on-site assessment
• Calculation of repair costs based on photos

Questions

• Are there any requirements for the condition of the body before applying an airbrush design?
• So what exactly is included in the concept of “body repair”?
• How to repair a car's coating yourself?

Ask a Question

Prices by brand

• Audi
• BMW
• Citroen
• Ford
• Honda
• Hyundai
• Infiniti
• Kia
• Land Rover
• Mazda
• Mercedes
• Mitsubishi
• Nissan
• Opel
• Peugeot
• Renault
• Chevrolet
• Skoda
• Subaru
• Toyota
• Volkswagen
• Volvo
• VAZ
• Lexus
• Porsche

Customer Reviews

I contacted the Kuzovnoy body repair center after an accident. To specialists send.

The other day I ordered left doors for my 99. I think the owners of this car know it.

I trusted my son to drive the car out of the garage while I opened the gate from the yard to the street.

The condition of the car body in the future will have a significant impact on its appearance and ability to operate.

The visual qualities of a car are noted depending on the condition of its body.

It often happens that various body defects need to be corrected, and as a result, body repair of VAZ cars is very popular.

Initially, the plant produces models that do not have any additional body protection, not counting the protective layer and paintwork.

If the outer layer is damaged, no matter how, it is necessary to repair the body using at least the simplest methods - protect the metal from spontaneous destruction and restore the paintwork.

The last part of the VAZ car body repair is its painting, which consists of two stages:

• Preparation for painting - at this stage it is usually determined which areas the paint should be on, while protecting the remaining areas from paint with covering paper and creating a temperature most suitable for high-level painting;
• Painting is the final step in body repair.

To properly paint a VAZ car, it is important to find a coating that matches the color of the given body and has approximately the same shelf life.

Sidebar text widget

To independently solve the problem of restoring parts of a VAZ 2112 car, you need to have the geometric dimensions of its body. In professional workshops, these properties must be taken into account, and they are individual for each machine model. Violation of body geometry must be eliminated, because it significantly reduces the safety of driving such a car.

From this article you can learn important information about the indicators on which high-quality repair of the VAZ 2112 body depends.

Popularity of VAZ cars

In addition, the production produces vehicle kits for assembling Lada cars, as well as their modifications, based on orders from other manufacturers. The main branch and production facilities of the company are still located in Tolyatti.

Many cars produced by the automaker became a real hit of the Soviet automobile industry. For example, such a powerful version of the Zhiguli as the VAZ-2103 became one of the most prestigious cars in the USSR. And the VAZ Niva generally became a sensation in the global automobile market.

However, despite the numerous advantages of VAZ cars, these cars also break down. Especially when you consider that people still use cars of this brand that were produced decades ago. And, apparently, for a long time they will overcome the numerous potholes and holes of their native roads.

Possible malfunctions of brands of this company, in principle, correspond to similar problems of other cars. And we will be happy to offer you car repair work for such brands of the VAZ automobile concern as

• 2101,
• 2103,
• 2102,
• 2106,
• 2107,
• and other models of both Soviet and modern production (for example, Lada Kalina, Lada Priora, etc.).

Impact of body geometry on handling

During the operation of a VAZ 2112 car, at some point deformation of body parts occurs. Safety on the road and ease of operation depend on the level of their wear.

VAZ 2112 has been produced since 1999. The car body of this model is similar to the 2110 modification, the difference is that the first one is slightly shorter than the second one.

The geometric properties of the 2112 made it possible to equip the car with many additional functional capabilities.

Sharp braking or an untimely start provoke, at first, damage to the bumper.

It combines the winning parts appropriate for the “ten”, as well as the rear seat of the station wagon from the 2111 model, which made the car much roomier and more maneuverable. The ability to transform the rear seat allows, if necessary, to significantly increase the volume of the interior. Improved maneuverability properties have simplified the process of entering a turn, which has significantly increased the level of safety for road users.

The VAZ 2112 has several modifications, for example, model 21123 is characterized by an unusual design of the hood and bumper, which allowed the car body to become popular among many car enthusiasts. After some time, the VAZ 2112 had a new grille model, and the hood took on a standard look.

Geometry check

Here are four main types of measurements that will allow you to make sure that the car has not been in an accident and has the parameters you need:

1. Reconciliation of diagonals. Before proceeding with detailed calculations, you should make two simple measurements that will immediately identify the problem. The car needs to be measured diagonally on both sides. If the measurement results coincide (with an accuracy of a millimeter), this will mean that the body as a whole has the correct shape. But we should not stop at these two dimensions.
2. Checking the height of the racks. To take this measurement, you need to measure the height of the racks in four places. It is important to take measurements from the front and rear, as well as from both sides of the machine. The four indicators must match.
3. Identification of a distorted roof plane. To find out if your car's lid is in place, take measurements from the door diagonals. You need to measure from the bottom rear corner of the door to the top front corner, and vice versa. If the indicators coincide on both sides, good. Just in case, it’s worth checking the roof diagonals.

1. Determining the correct location of the front glass. Contrary to popular belief, even if the windshield fits correctly, its geometry can be distorted. Therefore, be sure to compare the lengths of the diagonals of this part.

As a rule, problems with mismatched machine parameters arise after road accidents. However, this does not happen 100% of the time.

Welding or other repairs that involve heating the metal can affect the physical parameters of the vehicle. Therefore, each time take the above measurements after the car has been to the auto repair shop.

Geometric dimensions of the “two-piece”

This is a sports model, it stands out from others, which are monotonous in terms of the geometric dimensions of the body. The design features of the VAZ 2112 coupe allowed the model to become suitable in its time. But after the production of 10 thousand copies of the 2112 coupe, the creation was completed, so it is considered a rare model. Several modifications of the VAZ 2112 were equipped with hatches, which increased the comfort of the driver and passengers on the road by an order of magnitude. The body length of the 2112 is 4170 mm, the volume of the luggage compartment is 400 liters..

• length – 4170;
• width without mirrors – 1680;
• height – 1435;
• width with mirrors – 1875;
• rear door opening diagonal – 1320;
• small diagonal of the rear side window frame – 230;
• the distance between the center of the upper beam of the rear door opening to the middle of its lower beam is 1050;
• the long diagonal of the side rear window frame is 710. The VAZ 2112 is one of the most popular models among the cars produced by the Russian auto industry.
  It is relatively affordable, has a good design and different body styles. The main geometric dimensions of the body of this car are as follows (in mm): The rarest body type of the 2112 is a coupe, or 3-door hatchback. Thanks to these changes, the unit is easier to control compared to the tenth model. The steering wheel allows you to make turns easier and faster. The 2112 model is characterized by a sporty character.

Geometric dimensions of openings

Body parts more susceptible to deformation

If it is insignificant, then during repairs it is possible to achieve the features of standard geometry. In the presence of complex deformations, this is unrealistic, so it is easier to replace the damaged body part with a new one.

If the owner of the car does not take sufficient care of the condition of the body, then those parts that have close contact with the road surface are quickly eaten away by corrosion. And repairing the hood, doors and covered body parts instead of timely prevention is already more difficult and expensive.

Body frame parts

1 – radiator frame lining;
2 – radiator frame; 3 – upper cross member of the radiator frame; 4 – right front wing; 5 – front panel; 6 – hood hinge; 7 – hood; 8 – right front door; 9 – wind window pillar; 10 – interior panel of the front door; 11 – inner panel of the rear door; 12 – right rear door; 13 – frame of the roof hatch; 14 – left side; 15 – roof panel; 16 – rear suspension spring support; 17 – trunk lid; 18 – inner panel of the trunk lid; 19 – side window frame; 20 – rear bumper; 21 – rear pillar; 22 – left rear door; 23 – rear wheel arch; 24 – middle floor; 25 – spare wheel niche; 26 – central pillar; 27 – left front door; 28 – front pillar; 29 – front floor; 30 – left front fender; 31 – front suspension spring support; 32 – bracket; 33 – front spar; 34 – towing eye bracket; 35 – front panel; 36 – front bumper The body of the VAZ-2110 car is a monocoque four-door sedan, consisting of a body frame and attachments.

The body frame includes a base, sidewalls, roof and frame parts, connected to each other by electric welding (spot, seam and arc), and is a non-separable structure that has sufficient rigidity and is capable of carrying all the components of the car, mounted body components, components and interior details, etc.

Attachment components include the side doors, hood, trunk lid, front fenders, bumpers and radiator trim.

The doors, hood and trunk lid are attached to the body using hinges. The front fenders are attached to the body with bolts.

The front and rear buffers are secured with bolts. The radiator trim is secured using plastic clips and two bolts.

The windshield is three-layer “Triplex” type. Door glass, side and rear glass are tempered. The windshield, rear and side windows are glued to the body.

The front seats are separate, with backrest tilt adjustment and longitudinal movement mechanisms, with easily removable headrests, adjustable in height. The back of the front seats can be adjusted to a comfortable position for relaxation.

The rear seat has a one-piece cushion and a backrest divided into two parts by a folding armrest. Behind the armrest there is a hatch that can be closed with a lid, after removing which it becomes possible to transport long items in the trunk, partially letting them into the cabin.

The front and rear side seat belts are inertial, and the rear middle passenger lap belt is non-inertial.

The car interior is equipped with a cigarette lighter, front and rear ashtrays, sun visors, a heater, rear-view mirrors, and handrails. There is a mount for a fire extinguisher under the driver's seat, and a first aid kit under the passenger's seat.

The vehicle is equipped with front and rear towing eyes. In a variant version, the body can be equipped with headlight cleaners and washers, front wheel aprons, an additional brake signal, sill fairings, an air conditioning system, electric door locks, an electric trunk lock, electrically heated front seats, and side door safety linings.

The ventilation and heating of the interior is controlled automatically by the controller. If the car is equipped with an air conditioning system, the controller also controls the microclimate in the cabin automatically. Some of the cars produced can be equipped with a manually controlled ventilation and heating system.

The body has exhaust ventilation through deflectors with valves installed at the ends of the front and rear doors.

.. 170 171 172 173 174 175 176 177 178 179 180 ..

Lada VAZ-2110 (2111, 2112). Body

Body frame parts: 1 — radiator grille; 2 — radiator frame; 3 — upper cross member of the radiator frame; 4 — right front wing; 5 — front panel; 6 — hood hinge; 7 — hood; 8 — right front door; 9 — wind window pillar; 10 — interior panel of the front door; 11 — inner panel of the rear door; 12 — right rear door; 13 — roof reinforcement; 14 — left side; 15 — roof panel; 16 — rear suspension spring support; 17 — trunk lid; 18 — inner panel of the trunk lid; 19 — side window frame; 20 — rear bumper; 21 — rear pillar; 22 — left rear door; 23 — rear wheel arch; 24 - middle floor; 25 — spare wheel niche; 26 — central pillar; 27 — left front door; 28 — front pillar; 29 — front floor; 30 — left front fender; 31 — front suspension spring support; 32 — bracket; 33 — front spar; 34 — bracket for towing eye; 35 — front panel; 36 — front bumper.

Description of design The body is all-metal, welded, load-bearing structure. Most of the body panels are galvanized to improve their anti-corrosion properties. Electrozinc is applied on the inside to the front and middle floor panels, the side of the body, the wind strut amplifier, the outer panels of the trunk lid and doors, the front and rear fenders and a number of other parts (more than 30 positions in total). The rear wheel arches are galvanized on the outside. The rear panel, cross members and floor connectors, the inner panel of the trunk lid and hood, the trunk lid reinforcement and a number of other parts are coated with electrozinc on both sides. The engine splash guard, radiator frame, AB platform, gas tank flap cover, extensions and connectors of the rear wheel arches and a number of other parts (about 10 positions) are treated with hot-dip galvanizing (on both sides). The thickness of the main body panels is 0.8 mm. The body elements are connected to each other by contact welding, and in hard-to-reach places by semi-automatic electric welding in an inert gas environment. Panel joints and welds are sealed with mastic. After welding the panels, the body is phosphated, electrophoretic and secondary primers are applied and painted. Hidden body cavities are treated at the factory with the Oremin preservative. All glass is curved, polished, safety type. The windshield is three-layer, the door glass and rear window are tempered. Rear window - with heating element. The windshield, rear and side windows are glued into the body openings and are part of its power circuit. Door glass is sliding.

Energy-absorbing bumpers are installed at the front and rear. Removable body parts: doors 8, 12, 22, 27, trunk lid 17, hood 7, front fenders 4 and 30, bumpers 20 and 36. The front seats are separate, with adjustment of longitudinal movement and backrest tilt. Headrests are removable and height adjustable. The rear seat has a one-piece folding cushion. The backrest is divided into two parts by a folding armrest. Behind the armrest there is a hatch with a lid. By folding the armrest and lid, you can transport long items in the trunk, partially placing them in the cabin. The front and rear side seats are equipped with seat belts with inertia reels, the middle one is equipped with only a lap belt. In a variant version, the car can be equipped with headlight cleaners and washers, an additional brake signal, door sill fairings, an air conditioning system, electric door locks, electric windows, an electric trunk lock, electric heated front seats, a “Lux” instrument panel, an on-board computer, mirrors with electric drive and electric heating. The interior heating and ventilation system is described in the “Heating and Ventilation” section.

Linear dimensions of Lada Granta

Dimensions of Lada Granta door connectors

Dimensions of the engine compartment of the Lada Granta car

Dimensions of the windshield frame of the Lada Granta car

Dimensions of the rear window frame of the Lada Granta car

Dimensions of the trunk door opening of the Lada Granta car

Dimensions of the underbody of the Lada Granta car

What is “wheel alignment”

The wheels of the car must be positioned relative to the horizontal plane at a certain angle (camber), the same applies to the vertical plane (toe). This is required to achieve better tire traction and acceptable vehicle handling.

Correct setting of camber and toe angles ensures stable handling and stability of the vehicle

Convergence

This value can be either “plus” (when imaginary lines running parallel to the drive wheels will have an intersection point in front of the “nose” of the vehicle) or “minus” (when the intersection point is located behind). You need to understand that the closer the toe angle is to zero, the less resistance the vehicle has to the rolling effect.

A negative toe angle is bad. In this case, poor handling and poor response when turning the steering wheel will be observed. In addition, this will lead to the car yaw during travel (especially at high speed). The risk of an uncontrolled skid will increase significantly.

With “positive” toe-in of the front wheels, the vehicle is more responsive in handling, and it will be easier for the car enthusiast to take turns. It is also recommended to install the wheels of the rear axle with a positive toe value, then the car will become as stable as possible when driving straight.

If the convergence angles strongly differ from the factory settings, increased tire wear is observed:

• If positive - on its outer part;
• When negative – internal surfaces.

Therefore, it is not recommended to experiment with this angle.

Camber

Camber is the angle between an imaginary vertical plane and the lateral plane of the wheel. If the upper parts of the wheels “look” towards the center of the car, the camber angle is considered negative, and if outward, then positive. A significant discrepancy between the camber angles and the parameters set by the manufacturer will lead to rapid tire wear. Moreover, the car will begin to “drag” towards the wheel that has the maximum camber angle.

Custer

The behavior of a vehicle while driving is influenced by caster - the angle between an imaginary vertical and the axis of rotation of the wheels while turning the steering wheel.

Its meaning can have both positive and negative meanings. Because of this angle, the drive wheels will invariably return to their original (neutral) position. Its value determines the change in wheel camber when turning the steering wheel and the stabilization of the car while moving along an arc trajectory. The higher this value, the greater the stabilizing effect.

Caster angle - deviation of the angle of the longitudinal axis from an imaginary vertical line

The camber and toe angles should be constantly monitored, but the caster is set by the manufacturer during the development of the vehicle, and in most cases there is no need to change it.

It is important that the angles are the same on both sides of the vehicle. Otherwise, the car may behave unpredictably on the road - the car will “steer” to one side

Factory settings are 1 degree 30 minutes (plus/minus 30 minutes).

Control points of body geometry of VAZ 2110, 2111, 2112

A significant part of the repair work on cars, especially those arriving after road accidents, falls on body repairs. In most cases, when repairing a body, it is necessary to check the geometry of the attachment points of components and assemblies of the vehicle chassis. Geometry of the body and engine compartment of the VAZ 2110-12 in the diagrams:

If the body is heavily damaged, it is recommended that all interior trim be removed to facilitate measurement, inspection, and installation of hydraulic and screw jacks to correct distortion and damage to the body. Protrusion of the front surfaces and removable parts relative to adjacent panels is eliminated by fitting and adjusting them.

Complex do-it-yourself body repairs

The reason why a complete body repair becomes necessary is most often the same - a serious accident. In this case, the following defects may be observed:

• serious damage to the body;
• change in body geometry;
• subframe deformation.

The service station uses professional equipment for complex body repairs of such damage: stocks, automated computer installations. Thanks to them, you don’t have to worry about how to completely replace the car body or straighten a huge dent. When hard-to-reach places, such as the bottom, are deformed, the car is most often turned over. Inexperienced motorists will be helped by a video on how body repairs are done on a car shifter in auto repair centers, how to edit the body or restore the geometry of the body.

Body dimensions (for tinsmith)

Rear side door openings

(Sedan, liftback, station wagon)

Underbody (3D dimensions)

Lada Priora hatchback: technical characteristics and features of the model

Before purchasing any car, the future owner carefully studies the main characteristics. The selection of a vehicle is primarily based on its power, efficiency, and safety.

Data on new modifications of familiar models is very important. For example, for a Lada Priora hatchback, the technical characteristics will indicate the updates received, modifications to the car and advantages over analogues in a different body.

Dimensions and dynamic data of Priora hatchback

The solid hatchback has small but sufficient dimensions: length - 4.21 m, width - 1.68 m, height - 1.43 m. The internal space was reduced due to the small external dimensions, but had minimal impact on the comfort of travel for second-row passengers.

The technical characteristics of the Priora hatchback also had a slight impact on the trunk volume. In the sedan, the luggage compartment volume is 430 liters, and in the hatchback it is 360 liters.

The model is equipped with 1.6 liter petrol engines. The power plant is combined with manual or 5-speed automatic transmissions. Engine power is 87, 98 and 106 hp, the maximum possible speed is 176 (183) km/h. The technical characteristics of the hatchback indicated for the Lada Priora lead to the following fuel consumption in mixed mode: from 6.6 to 7.3 liters. The maximum figure applies to a model with an automatic transmission.

Features of operation of Priora hatchback

It is important to further study the internal features of the model before purchasing a car. For example, the Lada Priora hatchback technical characteristics, which are quite good, have a high-quality immobilizer and trip computer.

The model is equipped with electric power steering, electric windows, and heated exterior mirrors. No less important car settings include:

1. Precise steering wheel height adjustment.

2. The presence of a front airbag and emergency braking system.

3. Modern climate control and audio system.

4. Headlight range control and daytime running lights.

5. Alarm and central locking.

6. High-quality seat covering with automotive fabric.

The given technical characteristics of the Lada Priora hatchback and additions refer to the “norm” configuration. The base build lacks many of these comfort and safety features.

The cost of both modifications is almost the same, so with a small additional payment you can get a high-quality and reliable car. Subsequent modifications to the base car may take too much time, although the final price will not differ.

Particularly important for domestic cars are low consumption and cheap maintenance. The technical characteristics of the modern VAZ Priora hatchback model ensure minimal costs for vehicle diagnostics and repairs: maintaining the car in full working order is not difficult.

If necessary, the interior and exterior can be modified depending on the purpose of use. In its normal form, it can be used for family trips, daily commutes to work, and safe travel.

New Lada Priora trunk, dimensions, dimensions, ground clearance, ground clearance Lada Priora restyling

The dimensions of the restyled Lada Priora have not changed significantly. Although, due to the new front and rear bumpers, the length of the Lada Priora has changed by several millimeters.

As before, the restyled Lada Priora sedan has the longest length, which in the new version is 4,350 mm. The length of the station wagon is 1 centimeter shorter, but the Priora hatchback is even smaller, the length of this version of the body is 4210 mm. The width of the entire family is 1,680 mm and the wheelbase is the same for all 2,492 mm. But everyone’s height is different, the Lada Priora sedan is 1,420 mm, the hatchback is 1,435 mm, but the station wagon is generally 1,508 mm in height. The high height of the Priora station wagon is explained by the presence of roof rails. In a hatchback, the design of the rear part of the body is such that the car turns out to be taller than a sedan.

As for the ground clearance or ground clearance of the Lada Priora, the manufacturer indicates a figure of 165 mm for the sedan and hatchback, while the ground clearance for the Lada Priora station wagon is 170 mm. However, in fact, the ground clearance is greater; just pick up a tape measure and make sure of this. But the manufacturer is not mistaken; he simply indicates the vehicle’s ground clearance when fully loaded. At the same time, manufacturers of foreign cars are cunning and indicate the ground clearance of their cars in an unloaded state. therefore, the real ground clearance of foreign cars and their official data often do not coincide.

The luggage compartment volumes of the new version of Lada Priora in all three bodies have changed little. The sedan's trunk volume is 430 liters. The luggage compartment volume of the Priora hatchback is smaller, only 306 liters, but if you fold the rear seats (which cannot be done in a sedan), the volume increases to 705 liters. In the Priora station wagon, the luggage compartment volume is 444 liters, and with the seats folded down it reaches 777 liters. Unfortunately, the rear seats do not fold flat with the floor, and the large wheel arches eat up quite a lot of luggage space.

Further detailed data on the dimensions of the Lada Priora are in the table below.

Trunk volume of Lada Priora hatchback: size and characteristics

Lada Priora is considered one of the most expensive domestic cars, and it is also the most purchased car, since, according to car enthusiasts, it has stood the test of time. It is less expensive and its maintenance will be budget-friendly. Favorable price, attractive appearance and high power attract buyers.

When the driver has already decided on the brand of the car, you need to decide what equipment you want. Lada Priora is a car for young people. Of course, you want to choose a car worthy of your garage. This car has four configurations, but the most popular are the sedan and hatchback. There are also such types of equipment as station wagon and coupe. You must take the choice of car seriously, study all the characteristics well and choose the car that suits you. This is the only way you will understand the difference between analogues.

Explore the “insides” of the Lada Priora. For example, a hatchback will have a huge advantage with a high-quality immobilizer and trip computer, electric power steering, etc.