Nissan juke. control geometric dimensions of the body

Linear dimensions of the Lada Granta body

Body control points are needed for defect detection and adjustment of car body parts. To correct the geometry of the body, special rulers and tape measures are used, using geometric dimensions, special tools and stands.

By inspecting a car after an accident, the presence of “hidden” deformations in the power elements of the body can be determined:

- by the presence of distortions in the front parts; the magnitude of protrusions of one part relative to another;

— for violations of gaps in the interfaces of openings with doors, hood, trunk lid.

Damage to the body of a passenger car usually leads to the appearance of various distortions, which manifest themselves in violation of the geometric parameters of openings (doors, hood, trunk lid), side members, and interior frame beyond the permissible limit. Depending on the complexity of the damage, body distortions are classified into 5 types.

Opening skew includes violations of the geometric parameters of various body openings beyond the permissible size. Various combinations of side door, windshield or rear window frame distortions are classified as this type of damage.

A slight misalignment of the body involves damage that violates the geometric parameters of the openings of the hood or trunk lid (tailgate) beyond the permissible size without violating the geometry of the base of the body, door and window openings, with the exception of gaps between doors and front or rear wings.

Body distortion of medium complexity includes simultaneous violation of the geometric parameters of the openings of the hood and trunk lid (tailgate) or damage to the body with violation of the geometric parameters of the front or rear side members beyond the permissible dimensions without violating the geometry of the interior frame. For front-wheel drive vehicles, only the misalignment of the rear side members is taken into account.

A body distortion of increased complexity involves a simultaneous violation of the geometric parameters of the front and rear side members or damage to the body with a violation of the geometric parameters of the front and rear side members and the interior frame, or only the front side members for front-wheel drive vehicles - in excess of the permissible size.

Body distortion of particular complexity includes damage with violation of the geometric parameters of the front and rear side members and the interior frame beyond the permissible dimensions.

Elimination of body distortions is carried out by restoring damaged elements of openings, side members, and frames using straightening - stretching, shrinking and straightening until they are given their original geometric parameters.

Below are the geometric dimensions, relative to the control points, of the Lada Granta car.

rice. 2

Figure 2 shows the geometric dimensions of the engine compartment of the Lada Granta.

rice. 3

Figure 3 shows the dimensions of a car windshield.

rice. 4

Figure 4 shows the dimensions of the rear window of a Lada Granta car.

rice. 5

In Figure 5, the dimensions between the measurement points of the luggage compartment of the Lada Granta car body

rice. 6

In Figure 6, the geometric dimensions between the points of the lower parts of the Lada Granta car

Features of car modernization

Lada Granta Liftback is the most popular and sought-after model

The most popular among buyers is the Lada Granta liftback, released for free sale in 2014 and becoming a new modernized version of the sedan from AvtoVAZ. In many characteristics, these two cars are similar. However, judging by the first impression, the liftback looks much brighter and more expensive than the sedan with its clearly budget trim. Manufacturers have successfully given a second life to the sedan, using new modern trim along with sporty elements. At the same time, the overall dimensions of the car also received significant changes.

First of all, attention is drawn to the new bumper configuration and the fact that the liftback can be driven with any type of transmission. The air intake became wider and longer, and the side edges of the fairing were improved using plastic inserts, in the center of which fog lights were placed. The front optics themselves are now made more elegant and sophisticated, which, in turn, adds progressiveness to the car. Unlike the sedan, the door to the luggage compartment has been completely modernized and equipped with large glass, adding visibility from the cabin.

Lada Granta

The most popular version of the Grant today is the sedan. The liftback has also become a good seller, but it is still far from being a sedan. The VAZ 2190 is designed for 4 passengers, according to the documents it looks like a B-class car, but after considering the dimensions, you can safely classify it as a C-class.

Being a successor of the “Kalina” traditions, the sedan was even assembled on its platform and borrowed a lot of things from Kalina: body, chassis, interior. On the other hand, it is a different car with a different character, larger cargo compartment, redesigned design, etc. The trunk has been increased to 500 liters.

Here are the standard body dimensions of the Lada Grant.

Lada Granta body dimensions

As you can see, the dimensions of this VAZ model are 22 cm longer than those of the Kalina, but 7 cm shorter than the “Samarov” modifications.

Now other characteristics in more detail:

• The radiator grille has received a new corporate style, now resembling a Volga rook, which is held in place by a powerful molding. This grille cools the engine compartment more effectively, as it is equipped with large “nostrils”;
• The bumper is much softer than the VAZ ones and is painted in body color on some car trim levels;
• The general lines of the hood and trunk roof are slightly raised;
• The front optics have received more enlarged outlines, and in the basic version the cars are also equipped with daytime side light.

As for the trim levels, the new sedan can be purchased in 3 versions. The coolest is the Lux, equipped with a 98-horsepower engine and featuring a completely different level of interior equipment.

Among the features of the Granta body, one can highlight the good quality of the assembly and good quality of materials. The body parts are connected to each other using high-tech automated German welding. This allowed domestic producers to reach a completely different level.

We also highlight the good quality of painting and resistance to anti-corrosion treatment. Both of these processes are also carried out on German-made automated lines with excellent precision.

The modified body geometry gave the new Russian car a stylish, aspirational lines. This had a beneficial effect not only on the exterior, but also made it possible to significantly reduce the AED resistance. Now this coefficient is 0.36, which is more than 6 percent less than the base model. In addition, the pointed hood is less harmful to pedestrians, experts say.

Important functions are performed by overhangs:

• The Granta's rear overhang has been extended by 15 cm. In turn, this makes the interior even more spacious than before;
• The front overhang is designed in such a way as to reduce the thermal load on the engine and its environment.

As for other body differences:

• The underbody was specially designed for the new Russian car. Special metal sheets with special hardening and double-sided galvanization are a good solution that significantly increases service life;
• As for quality of life, in this particular case the indicator is increased by 12 percent when compared with Kalina;
• The weight of the car was reduced by as much as 40 kg, which could not but affect the handling. Now it has become much easier to maneuver in city tight rows, it is more convenient to take turns;
• It has become easier to install an additional roof rack, since the manufacturer has provided good, strong fastenings on top of the door seals.

Unfortunately, Granta did not lose the traditional VAZ “sores”:

• It is inconvenient to adjust the side mirrors. But this is not necessary, since they provide quite good visibility;
• On the other hand, short drivers will have poor visibility of the road due to the raised lines of the hood and trunk.

Advantages of different modifications of Grants

Dimensions of Lada Granta Sport

The car is produced in three modifications - standard, norm and luxury. They are distinguished primarily by the size of the body. The changes affected the bumper, mirrors, and radiator grille. The luxury modification received door moldings, alloy wheels and fog lights.

The most powerful Grant accelerates to hundreds in just 12 seconds. The sound insulation of the cabin is not ideal, but it is good enough that at this speed the noise does not create discomfort. The developers of Grants took care of the safety of the car. The interior is equipped with inertial belts and an airbag for the driver. Standard and luxury models also have airbags for the front passenger.

The interior of the cabin, when upgrading the model class, is distinguished by various additions that make operating the car more comfortable and enjoyable. Even if these are small details, such as the trim of the interior trim, the container for glasses, the divided back of the rear seats, but this brings not only aesthetic pleasure, but also significant convenience. The climate system is included in the luxury model range, as is remote control of the door locks and trunk of the car.

Heating the front seats will be useful, especially in latitudes with harsh climates. And the built-in audio system will help set the mood - everyone will want to take their favorite music with them on the road. Especially if the road ahead is long. It is worth noting that long distances are not a problem for Granta. This is a durable car and quite economical - fuel consumption for the extra-urban cycle is about 6 liters per 100 km, and for the combined cycle - only 7.5. Despite its dimensions, the car is maneuverable and in urban conditions consumes only 8.5-9.5 liters per 100 km.

The Lada Granta meets the expectations of car enthusiasts - a compact body, but a roomy interior, a low price, but a reliable car. This whole set of characteristics served as the key to people's love and high popularity of the car.

Removing old glass

Car dealerships always replace the seal. When making repairs yourself, you need to check the part and if there are no creases or stretch marks, then the elastic band can be reused. Dismantling old glass in stages:

1. Make a through hole in the sealant in the side of the windshield with an awl.
2. Stretch the string.
3. Tilt the string towards the glass and forcefully cut out the part around the perimeter.
4. If there is a danger of damaging the paintwork because the string is crooked, it is better to cover the frame with tape.
5. Pull out the windshield.

The most important step in self-installation is preparing the seat. The frame must be cleaned of old glue and primed. It is recommended to use assembly cutters or a construction knife. You cannot clean the seat down to the metal; it is better to leave up to 1-2 mm of the old sealant. When gluing, this will give additional grip and increase adhesion.

Features of external and internal design

VAZ 2191 is the first car with a liftback body from AvtoVAZ, and one cannot help but note a very successful debut. The appearance is much more attractive than the sedan; the more rapid lines do not deprive the car of its elegance. New front and rear bumpers, painted in body color, have a stylish design and give the car a modern look. The liftback body has less hydrodynamic resistance than its counterparts. The clever shape of the sloping roof prevents splashing on the rear window, cleaning it with air flow. New limiters on the front doors with a fine-tuning effect, which allows you to close the doors securely and easily without effort or slamming. One of the significant advantages of this car, rightfully called a family car, is the presence of a large trunk, the volume of which is 440 liters.

The interior of the VAZ 2191 is not much different from the Lada Granta sedan, but there are a number of improvements. The seats have high-quality upholstery with decorative inserts; thanks to the elastic pile of the fabric, it better supports the driver’s back when cornering. The seats, as well as the steering wheel, can be adjusted to suit your anatomical features.

The most expensive equipment - luxury prestige - is equipped with:

• rear seat head restraints,
• heated mirrors and a joystick for adjusting them,
• two airbags,
• climate control,
• large 7-inch on-board computer display with touch control,
• electric steering and other pleasant little things.

Replacing windshield wipers on a Lada Granta (+photo)

Replacing windshield wipers on a Lada Granta is quite easy, as on most cars. Almost every car enthusiast has changed windshield wiper blades on a Zhiguli and can easily do this on a Grant.

Let's look at a little instruction:

1. Raise the windshield wiper arms to a vertical position.
2. Turn the brush so that it is perpendicular to the lever.
3. Remove the lock from the lever. To do this, press on the protrusion, which is located between the brush and the lever.
4. Installation is carried out in reverse order.

The quality of road visibility is one of the key factors in safety and accident prevention. Almost every third driver faces the problem of poor-quality windshield/rear window cleaning.

In sunny weather this is not as important as in rain, fog, snow, when every second counts. The most common defect is the formation of “islands” of dirt in the center and edges of the windshield

When driving in a straight line, visibility is not hampered, but when you start to turn, you feel all the “charm”. There is only one solution to the problem - replacing the Grant liftback wipers, even despite the actual absence of defects or damage.

Body geometry VAZ 2112 slip dimensions

To independently solve the problem of restoring parts of a VAZ 2112 car, you need to have the geometric dimensions of its body. In professional workshops, these parameters must be taken into account, and they are individual for each machine model. Violation of body geometry must be eliminated, since it significantly reduces the safety of driving such a car. From this article you can learn important information about the indicators on which high-quality repair of the VAZ 2112 body depends.

The influence of body geometry on handling

During the operation of a VAZ 2112 car, sooner or later deformation of body parts occurs. Safety on the road and ease of operation depend on the level of their wear.

VAZ 2112 has been produced since 1999. The car body of this model is similar to the 2110 modification, the difference is that the first is slightly shorter than the second.

The steering wheel makes turns easier and faster.

Model 2112 is characterized by a sporty character. It combines the winning parts of the 10 with the estate rear seat from the 2111, making the car much roomier and more maneuverable. The ability to transform the rear seat allows, if necessary, to significantly increase the volume of the interior. Improved handling characteristics have simplified the process of entering a turn, which has significantly increased the level of safety for road users.

The VAZ 2112 has several modifications, for example, model 21123 is characterized by an original design of the hood and bumper, which allowed the car body to become popular among many car enthusiasts. After some time, the VAZ 2112 had a new grille model, and the hood took on a standard look.

Geometric dimensions of the “two-piece”

VAZ 2112 is one of the most popular models among the cars produced by the domestic automotive industry. It is relatively inexpensive, has a good design and different body styles.

The main geometric dimensions of the body of this car are as follows (in mm):

• length – 4170;
• width without mirrors – 1680;
• height – 1435;
• width with mirrors – 1875;
• rear door opening diagonal – 1320;
• short diagonal of the rear side window frame – 230;
• the distance between the center of the upper beam of the rear door opening to the middle of its lower beam is 1050;
• the long diagonal of the rear side window frame is 710.

The rarest body type of the 2112 is a coupe, or three-door hatchback. This is a sports model, it stands out from others, which are monotonous in terms of the geometric dimensions of the body. It was the design features of the VAZ 2112 coupe that allowed the model to become in demand at one time. However, after ten thousand examples of the 2112 coupe were produced, production ceased, so it is considered a rare model.

Several modifications of the VAZ 2112 were equipped with hatches, which greatly increased the comfort of the driver and passengers on the road. The geometric dimensions of 2112 made it possible to equip the car with many additional functional capabilities.

Body parts most susceptible to deformation

Sharp braking or untimely start provoke, first of all, damage to the bumper. If it is insignificant, then during repairs it is possible to achieve the performance of standard geometry. In the presence of complex deformations, this cannot be done, so it is easier to replace the damaged body part with a new one.

If the owner of the car does not take enough care of the condition of the body, then those parts that have close contact with the road surface are quickly eaten away by corrosion. And repairing the hood, doors and hidden body parts instead of timely prevention is already more difficult and expensive.

The question arose about replacing the TV (s/o) with a VAZ-2110, as there was great sadness. Like everyone else, in order to save money, as well as gain experience, it was decided to do it yourself. The question arose about the geometric dimensions of the engine compartment. I found a couple of diagrams on the Internet

Comments 18

I also need sizes to check, so which ones to use!

I made it approximately according to my measurements

You probably haven’t been here for a long time) I’ve already done and sold the car! I won’t edit the blog anyway!

Yes, I already made mine too. But this recording will still be useful to someone

Wow, I should try to measure it)

Didn't take any measurements? Otherwise, in just a week I’ll go on vacation, and I’ll start doing shamanism a little

Not yet, I won’t get around to it, but I’ll definitely write back if I intend to)

I would be very grateful

Features of the bodies of “Ladovo” models

ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline! Read more"

Since we started with QOL, let’s continue this topic. For the frame of Ladovsky models without glued glass, the quality of life is 14 thousand N*m/degree, which is a very good mark. And with glass this figure is even higher.

The testing of the Lada body in the rear turned out to be especially good. Thus, in the rear door opening, after a tough diagonal pressure test, the changes were recorded as only 1.5 mm, whereas on most foreign cars the same figure was 5-6 mm.

The body design of the Lada Largus and other similar models fundamentally complies with current European standards in terms of protecting passengers and the driver. The front subframe on Ladovsky models is one of the most important body elements responsible for this indicator. It is even considered an auxiliary spar, significantly increasing the strength of the body, as well as absorbing impact force.

The high quality of life of the Ladovsky body also has a beneficial effect on obtaining high-quality sound comfort in a car showroom. The frame does not twist over bumps and bumps, no deformations or anomalies occur between the interior and body elements, which ultimately has a positive effect on the absence of squeaks.

Note. Of course, in addition to the quality of life indicator, the quality of interior elements also affects the high level of sound comfort. They were obtained through proper calculation so as not to come into contact with the body in places where squeaking might occur. This was achieved by fixing the plastic components with special fasteners and minimizing the various gaps that arise one way or another between them and the body.

A lot of original parts, interchangeability of interior elements between Ladovsky models, enlargement of some parts of the body - all this was only a plus. In particular, the increase in some body elements led to a decrease in their number, which reduced production time and had a positive effect on performance.

Granta Lada overall body dimensions

The dimensions of any car have a significant impact on if. Comfort concerns the basics, then the passengers under their leadership are the first to feel comfortable when, and the driver is talking about the luggage compartment, the first thing that comes up is the practicality of the car. allows Clearance to feel confident on country roads. You can continue to give a lot of examples.

Statements like these do not bypass the heroine of today's homeland - the article model Lada Granta.

If we take a closer look at the interior, we immediately notice the commendable design of the seats, in the construction of which the manufacturer set the goal of ensuring the most comfortable seating for the participants of all voyages.

What external dimensions can Grant please?

For clarity, we present the body characteristics in comparison with its relative, the Lada Kalina.

1. length, in So the Lada Granta defeats its rival with a difference of 220 mm, because this parameter reaches 4260 mm.
2. The width is 1700 mm, similar to Kalina's figure. The differences are not large if you take the sedan version.
3. Parity is maintained in height, since this figure for both “Russians” is 1500 mm.
4. A similar picture is observed when comparing the bases - each mm for 2476.

Thanks to the increase in body length, the luggage compartment of the Granta has a large supply of free space, 440 liters compared to 355 liters of its rival.

The rear track of the Lada version of the Granta liftback reaches 1414 mm. This model allows you to have good stability and smoothness in easy to move road irregularities.

The size enclosed by the edge between the front bumper and the center of the axle is 804 mm at the front, and 980 mm at the rear.

The better to decarbonize the rings in the engine

The ground clearance of the model in question here, as in the case of the body, the sedan can boast of a value of 160 mm. However, in the line of the model Lada Granta there are liftback versions, for example, equipped with automatic transmissions, the ground clearance of which is slightly reduced, or rather, to 140 mm.

This indicator, in terms of its significance, is among the cohort in terms of the best cross-country ability and proudly migrated from its predecessor “Prosvet”. Viburnum is enough to guarantee that you can overcome:

• unpaved directions with a scattering of hummocks and holes;
• urban areas;
• snow-covered country roads;
• small hills with steep uncritical slopes.

What are the dimensions of Grants How

inside? It has already been indicated that the internal dimensions of our LADA are no less important. Granta, these indicators have a genuine impact on the impact of comfort on long-distance “cruises”

Grant filter replacement of cabin filter

Grant connector Indispensable

Diagnostics The advantage of the interior is the ability of the seats to be adjusted to many adjustments. The interior space is sufficient and carefully thought out, thanks to which long trips turn into fun and comfortable events.

If the value is set to the height from the joint of the seat cushion to the back of the seat, then it will be 910 mm for the front passengers, and rear passengers will have 80 mm more at their disposal, that is, 990 mm. The width of the seats is respectively 490 mm and 510 mm. The space available for the legs behind the seated driving participants in the process can reach a maximum height of mm.335 seat placement relative to the bottom of the front row for the row is 285 mm, and for 340 – the second mm. This parameter may vary depending on the seat adjustment (front).

For those who are interested in the distance between the pedal assembly and the front end of the driver's seat, thanks to regulation it can also vary from 335 mm to 560 mm.

Some owners of future practical LADA Granta steering wheels will probably be interested in the overall dimensions. The wheel diameter leaves the steering wheel at 375 mm. The remaining indicators are not particularly important here and we note that they are not capable of having the slightest negative impact on driving comfort.

In the trunk of a Lada Granta

Another important advantage is the overall dimensions in the luggage compartment width. in the compartment compartment reaches 1350 mm, and in the opening this parameter is 950 mm. The depth of the compartment 1025 reaches mm, and the internal height is 600 mm. These dimensions will allow you to transport even medium-sized household appliances.

Dimensions of Lada Granta and VAZ-2107 - compare dimensions

A car should not only be comfortable, but also practical. The size of the car directly affects the interior space and the ability to transport luggage. The dimensions of the LADA Granta allow you to feel comfortable in the cabin and carry a significant amount of luggage. To make it clearer, let’s compare the dimensions of the Lada Grant and the VAZ-2107. Everyone knows the seventh model of the Volzhsky Automobile Plant well, so the “seven” was chosen for comparison.

The length of the Lada Granta is 4 meters 26 cm. If you compare the new Togliatti sedan with the outdated VAZ-2107 model, it is immediately clear that the new Granta is 11.5 cm superior to the “seven”.

The wheelbase of the new car is 2476 mm, which is 52 mm longer than that of the seventh model. It becomes clear that the interior of the Lada Grant is larger.

The width of the LADA Granta is 1 meter 70 cm, which is 8 cm more than that of the VAZ-2107. There is no doubt that the interior is wider than the old “classic”. The height of the new sedan is 1 meter 50 cm (excluding mirrors). This is 54 mm more than the same “seven”.

The trunk of the Lada Granta has a volume of 480 liters. The seventh model can accommodate 379 liters, that is, 101 liters less. In addition, the trunk volume of the LADA Granta can be increased due to the folding backrests of the rear seats, which our summer residents will especially appreciate.

In this case, you can transport very large loads.

The ground clearance of the Lada Granta with curb weight is at least 16 cm. The ground clearance of the VAZ-2107 to the rear axle beam is 154 mm, and to the additional muffler housing is 120 mm. As you can see, a deep rut is more dangerous for the seventh model.

By the way, the track of the front wheels of the LADA Granta is 1430 mm, the rear - 1414 mm. The “seven” has a front wheel track of 1365 mm, and a rear wheel track of 1321 mm. Taking into account the longer wheelbase of the new sedan, you can be sure that the Lada Granta is much more stable on the road than the seventh model.

The size of LADA Granta tires in the “Standard” version is 175/70R13, that is, the tires are mounted on 13-inch wheels. This modification of the sedan comes off the assembly line with conventional stamped wheels. Lada Granta “Norma” tire size is 175/65R14. Cars in this version, depending on the configuration, are equipped with 14-inch stamped or cast wheels.

Components of an air conditioner

The thermostatic valve is located in the evaporator housing and is designed to reduce pressure. This phenomenon causes the refrigerant to boil in the evaporator. It should be noted that the device does not require configuration.

As for the receiver-dryer, this unit is used for liquefied refrigerant purification. Filtration is carried out using silica gel. Long-term depressurization of the air conditioning system requires replacement of the device. This is due to the fact that the dehumidifier in the Frost model, after refueling the system, is not able to fully perform its functions. The result can be the formation of acids and their destruction inside the air conditioning system.

The components of the structure under consideration are connected to each other by a pipeline. This product is made of aluminum alloy and has a single sealed circuit. During the operation of the vehicle, it is recommended to avoid possible dents or scratches on this pipeline.

The moving elements of the air conditioner are connected to each other by special flexible inserts made of synthetic raw materials. These inserts can withstand pressures up to 30 bar. Each rubber pipeline connection is equipped with rings that are designed to improve sealing. It should be noted that these rings are disposable, so they require replacement when dismantling or disconnecting pipelines and inserts.

How to restore geometry

Restoring geometry in the garage comes down to straightening the body elements and tightening all the bolts, if the car was not involved in an accident. The measurements between the technological holes are checked with a tape measure. If the geometry is slightly damaged due to long-term use, it is recommended to check all body fasteners and welds.

It is almost impossible to thoroughly restore the body after an accident on your own, without special equipment. Even if measurements are taken with millimeter accuracy, it is often impossible to align body elements; it is necessary to replace them with new ones. If the frame is deformed, you will need to install the car on a stand and carry out stretching.

Geometry of Lada Granta (VAZ 2190)

Body dimensions of VAZ cars, data on geometry and control points of Lada 2190 from factory documentation.

Reference linear dimensions of the door openings of the Lada Granta Reference linear dimensions of the windshield and rear window openings of the VAZ 2190 Control dimensions of the body in the engine compartment (underhood space of the Lada Granta) Reference dimensions of the trunk lid of the VAZ 2190 Main dimensions of the body of the VAZ 2190 (Lada Granta) bottom

Lada Granta Sedan overall dimensions

overall dimensions of the Lada Granta Factory diagrams show the overall dimensions of the Lada Granta body, the distance between the wheels, the angles of the front and rear overhang, the track width, the spaciousness of the interior and some other dimensions.

Comparison of interior dimensions of Lada Granta with competitors: Daewoo Nexia, Renault Logan, Zaz Chance.

Lada Granta interior dimensions

Dimensions of Lada Granta liftback

Overall dimensions of the Lada Granta liftback The width and height of the body remained similar to the Lada Granta sedan, only the length of the body differs; in the liftback it is 14 mm shorter. The interior dimensions of the Lada Granta liftback are also almost the same as those of the sedan. The only exception is the space above the head of the rear passengers, which has decreased by 8 mm. The trunk volume is 440 liters, but can be increased to 760 liters if the rear seat backs are folded.

Dimensions of the trunk of the Lada Granta liftback:

Dimensions of the trunk of the Lada Granta liftback It is also worth noting the difference in the dimensions of the luggage compartment. In the sedan and sport body, the trunk has the same volume - 520 liters, but in the liftback, the trunk is increased to 760 liters, thanks to the modified body.

Comparison of overall dimensions of Lada Granta liftback and sedan

The width of all three types: sedan, liftback and sport is absolutely the same. The dimensions of the car, from the edge of the left mirror to the edge of the right, are 1.7 meters. These dimensions are not very different from other Lada models (in width). At the same time, roominess and comfort are completely different in each model. For example, in Grant the interior is quite spacious, which cannot be said about Kalina. The height of the sedan and liftback body is the same, and is equal to 1.5 meters. But as for the Lada Sport, its height is slightly smaller - 1470 mm. The difference of 30 mm is achieved due to the lower suspension. Dimensions indicating height are calculated from the road surface with which the wheel comes into contact to the top point of the car's roof. Also, the Sport Grant has a wider wheelbase. That is, despite the same width of all bodies, for this sample, the wheel axles are lengthened by 15 mm. Of course, such a difference is not significant, and with such dimensions, the wheel will not stick out from the arches, increasing the dimensions of the car.

The doors are quite wide, which ensures comfortable entry and exit of passengers. The height of the rear door is 97.2 cm, and the width is 61 cm at the bottom and 83.3 at the top. The front doors have slightly larger dimensions: height – 1 meter, width – 1 meter 72 millimeters. With the doors fully open, access to the interior will not be a problem.

www.cargeometry.org

Lada Granta Liftback • Becky's Pearl. › Logbook › 96. Truth is born in disputes! 07/28/2018.

And again I am glad to welcome my subscribers. Today’s post will be dedicated to a small dispute with a work colleague.

The owner of the Izh 2126 Oda claims that his car is more spacious than the Granta liftback.

Let's take a closer look at these cars, take comparative measurements of the interior and draw parallels.

We will not express our opinions; every sandpiper praises his swamp. Everyone will have their own opinion. And you yourself must decide which car is bigger, more comfortable and more spacious.

Let's look at the factory dimensions of these cars.

As a basis for comfort and space in the cabin, we will take the Vesta sedan, also for a work colleague. Let's compare them together.

All this action was filmed on a smartphone, so don’t kick too much!

What did we learn from these measurements?! Whatever you say, Oda seems smaller than Granta, but some measurements show discrepancies. So, for example, the opening of the luggage compartment turned out to be much larger than that of the liftback.

There is certainly a plus in this, but the size of the luggage space itself is significantly smaller, both from official figures and visually.

Oda’s trunk door spans the entire width of the car, which is why the usable opening is enlarged.

In a liftback, the tailgate closes as if inside the car, that is, it does not span the entire width of the body. It’s not for nothing that the car turned out to be more torsionally stronger than the sedan. The width of the opening box affects.

Based on measurements inside the luggage compartment, we also see numbers that speak for themselves.

Likewise, the depth of the loading space allows you to make sure which trunk is larger and deeper.

Let's look at car door cards.

As can be seen from the measurements, the width of Oda turned out to be slightly wider, by two centimeters. Oda door cards are flat and do not protrude. The doors are thin.

At the elbows, at the level of the armrest, the width of Granta was 140 cm. And at the level of the forearm, at the top of the cards, it was 137 cm.

However, visually the space in Grant seems larger. The height and length of the cabin probably affects this. In Oda there seems to be less space, this is felt both behind the wheel, in the driver’s seat, and in the passenger seat. Everything seems narrow, the roof and the pillar are pushing in. Perhaps this is due to the inclination of the racks; on Oda they are more inclined at a more obtuse angle than on Grant.

Installation process

Before installation, you need to prepare new glass:

1. Apply a layer of primer around the perimeter and wait 10 minutes.
2. Treat with primer and let dry for 10-15 minutes.
3. Apply a layer of glue 10 mm thick and 10-12 mm high along the edge of the glass. Make sure that the sealant strip is not interrupted.
4. After 15 minutes, apply the windshield to the frame, pressing lightly so that the sealant does not come out too much over the edge.
5. Install molding.
6. Secure the part with tape.
7. Cut off the remaining sealant with a knife.

The sealant dries in 24-36 hours. It is recommended to check the glued areas for leaks after the glue has completely dried. It is necessary to close the doors and pour water onto the front bucket, then carefully look inside the cabin to see if there are any leaks. If a defect is found, wait until the part dries, bend the rubber band and re-glue the leaky joint.

It is recommended to install attachments: mirrors, rain/light sensors, heating after all checks and the sealant has completely dried.

Trunk Kalina sedan

The configuration in this version is the first model whose dimensions were calculated by a computer program. The model has been produced since 2004. The sedan's dimensions are similar to the station wagon, but due to the difference in design types, the sedan's interior seems more spacious:

• length 4040 mm;
• width 1700 mm;
• height 1500 mm;
• vehicle clearance 160 mm.

The trunk of the sedan is 400 liters. This figure can be increased by folding the passenger seats. Trunk volume Kalina sedan:

• trunk width – 97 cm;
• height – 51.5 cm;
• diagonal – 97 cm.

The sedan has a fairly spacious interior and a roomy trunk, although it is not specifically designed for transporting large cargo. You cannot put large items in the trunk, but it is easy to transport luggage up to 500 kg.

Technical characteristics of Lada Granta

sedan 4-door

City car

• width 1,700mm
• length 4,268mm
• height 1,500mm
• ground clearance 190mm
• seats 5

hatchback 5-door

City car

• width 1,700mm
• length 3,926mm
• height 1,500mm
• ground clearance 190mm
• seats 5

liftback

City car

• width 1,700mm
• length 4 250mm
• height 1,500mm
• ground clearance 190mm
• seats 5