VAZ 2107 lamps: what they cost, which ones are better to install


Article: P147-04.43

Order code: 012008

In stock Available for order – >10 pcs. Data updated: 05/14/2021 at 15:30

Order code
012008 Articles P 147-04.43 Manufacturer AUTO FITTINGS Catalog group: ..Electrical equipment Electrical equipment Width, m: 0.04 Height, m: 0.02 Length, m: 0.04 Weight, kg: 0.015
Description

Main light switch

Designation – P 147-04.43

Applicability

– main light VAZ-2107

Design features – keyboards.

Technical characteristics: – inclusion of various consumers depending on the symbol on the key and the electrical circuit – number of positions – 6 – rated voltage – 12; 24 V – highest load current – ​​10; 5A – weight – 0.025 kg

The main manufacturer is JSC AVTOARMATURA

Information used: Avtokomplektatsiya LLC

Product reviews

Certificates

Reviews

There are no reviews for this product yet.

Write a review

  • Switch key VAZ-2107 external lighting AUTOMATIC ARMATURE Article: P 147-04.43 Order code: 012008 195 ₽ or place an order by calling 8 800 6006 966

Availability of goods in warehouses and stores, as well as the price of the goods is indicated on

14.05.2021 15:30

.

Prices and availability of goods in all stores and warehouses are updated once an hour.
If there is a sufficient quantity of goods in the store you need, you can buy it without pre-ordering. Internet price
– valid when ordering on the website or through a call center operator by phone

8-800-600-69-66

. Subject to sufficient quantity of goods at the time of order.

Price in stores

– retail price of goods in store sales areas without pre-order.

The period for moving goods from a remote warehouse to the warehouse of an online store.

The parts data presented on this page is for informational purposes only.

518ba3368faea55a62fccf57d6052c7b

Add to cart

Available to order:

Order quantity:

Product successfully added to cart

!

Instrument lighting bulbs.

#1 Driver

  • Our people
  • 681 messages
  • 0 thanks
  • City VAZ 21074, Nizhny Novgorod region,
  • Top
  • Answer
  • Quote
  • Insert nickname or quote

#2 dimas777

  • Legends
  • 993 messages
  • 0 thanks
    • City VAZ 2107, Donetsk, Ukraine

    Don't tune in, you'll still get x. th

    • Top
    • Answer
    • Quote
    • Insert nickname or quote

    #3 CockroachY2K

    Full-time engineer

  • Our people
  • 921 messages
  • 0 thanks
    • City of St. Petersburg, Stachek
    • Car: Hyundai Solaris Family and Hyundai Solaris Comfort+Prestige
    • Top
    • Answer
    • Quote
    • Insert nickname or quote

    #4 [Grinders]

    Auto Insurance Expert

  • Users
  • 154 messages
  • 0 thanks
    • City VAZ-21053 1997 and VAZ-21102 2003, Nizhny Novgorod [52RUS],
    • Top
    • Answer
    • Quote
    • Insert nickname or quote

    Design and characteristic malfunctions of the rear lights of the VAZ-2107

    Structurally, the rear light of the VAZ-2107 car consists of:

    • left and right diffusers;
    • left and right conductors;
    • two 4 W lamps and two sockets for them;
    • six lamps with a power of 21 W and six sockets for them;
    • four M5 nuts.

    The brake light and side lights on the rear light should be red, the turn signal should be orange, and the reverse light should be white . The most typical malfunctions of the rear lights of the VAZ-2107:

    • lack of mass on the lantern;
    • lamp burnout;
    • oxidation of contacts;
    • broken or frayed wiring;
    • failure of connector contacts, etc.

    No mass

    One of the reasons that the tail light does not work may be the lack of weight on it. You can check the integrity of the ground wire visually or by ringing it with a tester. The ground wire in the standard configuration of the VAZ-2107 is usually black, and it occupies the extreme position on the connector block. It is followed by wires:

    • brake light (red);
    • side lights (brown);
    • fog lamps (orange-black);
    • reverse lamps (green);
    • direction indicator (black and blue).

    Lamp burned out

    The most common malfunction of rear lights is the burnout of one of the lamps. In this case you will need:

    1. Remove the plastic plug from the trunk side, which is secured with four plastic screws;

    Contacts have oxidized

    Oxidation or clogging of the contacts of the connector block may be a consequence of their insufficiently tight connection, as well as dust and other small mechanical particles getting inside the headlamp due to wear or drying out of the rubber seal. The processes of oxidation and contamination of contacts can be prevented through regular preventive inspections and maintenance of all elements of the lighting system.

    There are many cars whose rear lights do not work at all, or only work halfway; others do not turn on their turn signals and drive with the rear fog lights on. I'm not one of those riders. I do everything so that my car works as it should, so that the moss of signals is visible and does not blind.

    Ivan64

    https://www.semerkainfo.ru/forum/viewtopic.php?f=7&t=14911&start=75

    Broken wiring

    The integrity of the wiring is checked with a multimeter if the location of the break cannot be determined visually. The purpose of each of the wires coming to the connector can be determined from the VAZ-2107 electrical equipment connection diagram.

    Video: how to improve the performance of the rear lights of a VAZ-2107

    Failure of connector contacts

    Deterioration of contact in the detachable connection between the board and the plug can lead to burnout of the track with the impossibility of restoration. In this case, additional wires are soldered between the connector and the socket or the connector is completely replaced. It should be remembered that the new board may be equipped with a cartridge with non-spring metal, so it makes sense to keep the old cartridge. When replacing the board, it should be taken into account that the color of the wires may not match the color on the original blocks, so it is better to focus on the order of the contacts and solder the wires of the new connector to the wires in the harness sequentially one at a time.

    Connection diagram

    On the board connector, the tracks leading to the sockets of different lamps are marked with numbers:

    • 1 - mass;
    • 2 - brake light;
    • 3 — side lights;
    • 4 — fog lights;
    • 5 — reversing lamp;
    • 6 — direction indicator.

    Digital indicators

    Now let's move on to digital indicators. There are only two of them: the total mileage of the car and the daily mileage.

    • Total mileage - located under the speedometer needle, has a value range from 0 to 99,999 km. Shows the number of kilometers traveled over the entire period. Helps determine the mileage required for an oil change and timely overhaul;
    • Daily mileage - located above the speedometer needle. Its range is from 0 to 999 km. Helps calculate fuel consumption per 100 km, under different driving modes.

    That's all, we have figured out what each sensor and device means. It is highly recommended that you do not ignore them, and the chance of an unpleasant surprise on your trip will be greatly reduced.

    • Luminous flux: 2500 / 2500 lm
    • Power: 25 / 25 W
    • Warranty period: 2 years
    • Luminous flux: 100 lm
    • Power: 1W
    • Warranty period: 1 year
    • Luminous flux: 180 lm
    • Power: 1W
    • Warranty period: 1 year
    • Luminous flux: 800 lm
    • Power: 21 W
    • Warranty period: 1 year
    • Luminous flux: 150 lm
    • Power: 1.3W
    • Warranty period: 3 years
    • Luminous flux: 100 lm
    • Power: 1W
    • Warranty period: 1 year
    • Luminous flux: 2000 lm
    • Power: 17 W
    • Warranty period: 3 years
    • Luminous flux: 400 lm
    • Power: 2.5W
    • Warranty period: 1 year
    • Luminous flux: 800 lm
    • Power: 21 W
    • Warranty period: 1 year
    • Luminous flux: 800 lm
    • Power: 5W
    • Warranty period: 2 years
    • Luminous flux: 400 lm
    • Power: 2.5W
    • Warranty period: 1 year
    • Luminous flux: 260 lm
    • Power: 4.3 W
    • Warranty period: 1 year
    • Luminous flux: 150 lm
    • Power: 1.3W
    • Warranty period: 3 years
    • Luminous flux: 300 lm
    • Power: 3W
    • Warranty period: 1 year

    What kind of bulbs are in the headlights?

    The manufacturer installed only three light bulbs in the VAZ 2107 headlights:


    Left headlamp VAZ 2107 and location of lamps in it

    Appearance Type according to GOST

    (domestic labeling)

    EEC type

    (international modern marking)

    Purpose Description Location

    in the device

    (photo above)

    Where can I buy
    AKG12-60+55H4high and low beamhalogen, double-spiral, power 60 and 55 W 1
    A12-4-1T4Wparking lightsincandescent, power 4 W 2
    A12-21-3P21Wdirection indicatorincandescent, power 21 W 3

    As a conclusion

    Changing the lamps on the headlights of a VAZ 2107 is not a difficult task. The main thing is to act carefully, because not so often a living person looks into them. Some parts may become “bitten” and will not want to be removed the first time. With a lot of force, there is a chance of breaking them. For example, when replacing dimensions, they often jam in the reflectors. There have been cases in my practice where they were “torn out” with a piece of that same reflector, and this was a replacement for the entire headlight.

    So, you need to be careful, the “Seven”, although a strong machine, can tolerate and forgive you a lot, but some of its elements require a certain “tenderness”. A car is like a girl - the way you drive it is the way you will live with it - a popular automotive saying.

    Review of some faults

    The lack of light does not always mean burnt out lamps; there are several main reasons why problems arise, and we will look at them:

    Bulbs Since the lamps in this model are combined, then if both low and high beam lighting disappear at the same time, the light bulbs are to blame. Of course, there may be other reasons, but they are less likely. Relay The low beam on the VAZ 2107 is separate, so if the low beam has disappeared, then you need to start looking for the reason by checking this element. Its location is shown in the diagram below, there are also other important components of the system, all of them are located in the mounting block, which is very convenient. Fuses This model has a separate fuse, like each type of light in the headlights. For example, different elements are responsible for the right low beam and the left low beam, and the same is true for the high beam. If you have lost the light on one of the lamps, then start with the fuses and only then move on to the other components. Wiring If the low beam on the VAZ 2107 does not light, then the cause may be poor wiring in the car. First of all, you need to check the contacts on the connections in the lamp socket, and also ring the circuit at all connection points; over time, the contacts can burn out and work poorly. Also, in older machines, the wire may break through to ground due to the loss of its properties by the insulation or its destruction.

    Important! Sometimes voltage surges occur in the system and the low beam coils in two lamps can simultaneously burn out, this is very similar to a relay failure, but you should not change it, first be sure to check the part with a tester, and if everything is fine with it, the reason is precisely lamps

    In the diagram, the low beam relay is designated R3, and the high beam relay is designated R2

    What factors influence the quality of road lighting at night?

    Let's list why your headlights don't shine well, and when the car left the showroom, you were happy with the head optics.

    1. Brightness of installed lamps. There are “stock” incandescent, halogen, LED and xenon lamps. Ascending, brightness increases, xenon is considered the brightest light; a dim lamp is one of the reasons for poor headlights
    2. Wear of the headlight glass and its reflector;
    3. Adjusting the angle of inclination and rotation of the headlight.

    We will consider each of these points in detail in separate articles. Let's start with the brightness of the light bulbs.

    VAZ-2107 diagram: first option

    Full size wiring diagram:

    How to remove and repair the signal button on the steering wheel using the example of a VAZ 2107

    Carrying out independent repair of the signal button on the steering wheel of a VAZ 2107 will not be difficult.

    To do this, just read the following instructions:

    1. Initially, it is recommended to disconnect the ground from the battery, since the upcoming work is electrical. This will eliminate the possibility of a short circuit.
    2. To remove the steering wheel top cover, you will need to unscrew two bolts from the inside using a Phillips screwdriver.
    3. The steering wheel itself is dismantled using an open-end or regular 24mm wrench, which is used to unscrew the fixing nut. To completely remove this part, you will need to perform rocking movements in different directions while simultaneously applying pressure in your direction.
    4. After removing the steering wheel, you can find a special contact that should be cleaned of oxidation/contamination and bent if it is positioned incorrectly.
    5. The entire structure is assembled to its original state in reverse order.
    6. Performs a system health check.

    Causes of reverse lights not working

    If you find that the light on the seven does not light up when reversing, then you need to immediately identify the problem and fix it. Most likely the reason will be:

    1. Fuse blown. If any electrical appliance or circuit malfunctions, the first step is to check the serviceability of the fuses. From the name you can guess that the essence of a fuse is to protect an electrical circuit from high current and short circuit. If the fuse is blown, it needs to be replaced and the lights will work properly.
    2. Bulbs burn out. One of the reasons is the burnout of the lamps, but this factor is easy to exclude, since if the lamps burn out, not both of them burn out at once.
    3. The integrity of the wiring is compromised - mechanical stress often contributes to damage to the wires. Rarely is the cause of their damage due to a short circuit. To determine if the wiring is working properly, you will need to use a multimeter by ringing each wire or measuring the voltage on the lights.
    4. Sensor malfunction - it is also called the reverse switch, since it is responsible for turning on and off the light alarm. Moreover, it may either break, in which case it will need to be replaced, or the terminals may oxidize, compromising the quality of the contact connection.


    This is what the sensor on the gearbox looks like:

    The sensors on 4- and 5-speed gearboxes of 7s are different. You need to pay attention when purchasing.

    Malfunction of the reverse sensor is quite common, so you first need to check the integrity of the fuse, then make sure there is voltage on the lights, and only then proceed to replace the switch in question. Moreover, its malfunction can be manifested not only by the lack of lighting of the lights, but also by constant burning. If the 3X lights are constantly on, then it is necessary to replace the sensor.

    How to find the reverse sensor VAZ 2107

    The element in question, which is responsible for turning the rear lights on and off on the VAZ 2107, is located in the main mechanism - this is the gearbox. To find the location of the switch, you need to crawl under the car and look at the box. The element is attached to the bottom of the gearbox on the right side.

    It is impossible to confuse it with another sensor if you know where the box is and what it looks like. There is only one sensor installed on the box, not only on carburetor, but also on injection modifications.

    This small part cannot be repaired, so if it is found to be faulty, it will need to be replaced. To make sure that the cause is in the device in question, you should remove the lead wires from the sensor terminal, and then move the gear shift lever to the reverse position. Set the multimeter regulator to the continuity position and touch the two contacts with the probes. If the device emits a sound signal when the reverse gear is engaged and, on the contrary, is silent when the lever is moved to the neutral position, it means that the element is working and you need to look for the cause in other components. Knowing where the frog is located on the VAZ 2107, it will not be difficult to check it further.

    Read, it may come in handy: Repair of door hinges VAZ-2101-2107


    Location under the bottom of the car

    Stop signal

    The brake light switch is located on the brake pedal hanger holder . The brake light is turned on as follows: when you press the brake pedal, the spring in the switch presses the control pin. At the same time, the contacts in the switch close the brake light circuit. When the brake pedal is released, the pin returns to its original position and the brake light goes off.

    If the brake lights do not work on a VAZ-2107, you should make sure that the cause of the malfunction is not in the switch. To do this, you need to unscrew the ends of the power wires and place a jumper between them: if the brake lights turn on, the switch should be repaired or replaced. To replace the brake light switch, you must turn it clockwise 90 degrees and remove it from the mount. After installing the new switch, make sure that the neck of the switch fits snugly against the brake pedal and turn it 90 degrees counterclockwise. The new switch is adjusted automatically when the brake pedal is pressed. The switch operates normally if the brake light is turned on no earlier than the brake pedal has been moved 5 mm, but no later than it has been pressed 20 mm.

    Fuse F11 is installed in the brake light circuit, which, in addition, is responsible for the operation of the interior body lighting.

    Some VAZ-2107 owners install an additional brake light so that the signals given by the driver are more visible on the road. This type of brake light is usually placed on the rear window inside the cabin and operates on LEDs.

    Main causes of malfunction and methods of elimination

    In principle, there are few reasons that cause this malfunction, and almost any of them can be eliminated independently with basic electrical knowledge. So, the main reasons for the failure of the rear dimensions are as follows:

    1. The fuse responsible for the side light has blown.
    2. The contact in the connecting blocks for the power supply of the size lamps has disappeared.
    3. The power cable has broken.
    4. The power wire is shorted to the body.
    5. The side light bulb has burned out.

    Now let’s talk about methods for eliminating these faults, but first let’s take a look at the external lighting diagram of the VAZ 2107:

    Product range

    The website catalog presents LED products for the VAZ 2107 model car. We sell lamps for all VAZ external lighting devices:

    • Rear (4-15 W), front (4-15 W) and side (0.7 W) turn signals;
    • For low and high beam headlights (16/16-30/55 W);
    • Front (0.5-1 W) and rear marker lights (1 W);
    • Rear fog lights (3.3-7.4 W);
    • Rear license plate illumination (0.5-3 W);
    • Brake light (3.3-7.4 W);
    • Reverse (3.3-8 W).

    All devices come with a minimum one-year warranty.

    You can order LED products for the VAZ 2107 car on the website or by phone. Before placing an order, you can consult with our manager - a specialist will tell you which model of light bulb is ideal for installation in the headlights of your car.

    The site also presents lamps for DRLs, low beams, PTF and car interior. You can order the product on the website or by calling the phone number indicated above.

    How to replace low and high beam bulbs with H4 socket

    The design of such lamps is universal. Therefore, replacing light bulbs on foreign and domestic cars will not be much different. The bases are the same, the methods for attaching them to the reflectors are the same, and the methods for connecting the wiring are similar.

    1. Remove the protective cover from the inside of the headlight

    2. Disconnect the lamp connection socket to the car wiring and remove the H4 lamp from the headlight unit of the VAZ 2107

    3. Unclip the spring clips securing the lamp to the headlight reflector

    5. Take out the light bulb along with the H4 socket. If the lamp is intact and you continue to use it, it is recommended not to touch the bulb with your hands, it may “burn out.”

    Installation of new lamps occurs in the reverse order. The screenshots show an example with the classic VAZ 2107 model, since it also uses an H4 socket with low and high beam lamps in one housing. The principle is the same, so this will be useful not only for Tazavod, but also for owners of other car brands.

    Schemes of individual blocks of the seven

    Power supply system

    Power plant starting system

    1 - starter; 2 - relay; 3 — ignition switch; 4 - battery

    Ignition system

    1 - generator; 2 — ignition switch; 3 - distributor; 4 - breaker; 5 — candles; 6 - coil; 7 - battery

    Contactless ignition system

    External and internal lighting

    Windshield wipers and washers

    1 — electric motors of the windshield wiper; 2 — washer motor; 3 — mounting block; 4 — ignition switch; 5 - washer switch

    Cooling Fan

    1 — fan electric motor; 2 - sensor; 3 — mounting block; 4 - ignition relay; 5 - ignition switch.

    Fog lights

    Driving a car in rain or snow can create a lot of trouble for the driver who is forced to drive the car in poor visibility conditions. In this situation, fog lights (FTL) come to the rescue, the design of which provides for the formation of a light beam that “spreads” over the surface of the roadway. Fog lamps are usually yellow, since this color tends to dissipate less in fog .

    Fog lights are usually installed under the bumper, at a height of at least 250 mm from the road surface. The installation kit for connecting PTF includes:

    • set of wires;
    • relay;
    • button.

    In addition, a 15 A fuse will be required, which will be installed between the relay and the battery. The connection should be made in accordance with the diagram supplied with the installation kit.


    The fog lights must be connected in accordance with the diagram supplied with the installation kit.

    Video: self-installation of fog lights on the “seven”

    Rating of the best headlight lamps for VAZ 2107

    The main question that needs to be resolved when compiling a rating is what criteria should be used to select devices? What does better mean – brighter, more durable, cheaper? Therefore, before choosing the best of the best, we will divide the lamps into three categories:

    • standard;
    • with increased light output;
    • with increased resource.

    Now let’s create a ranking table for each category.

    The best lamps with standard characteristics

    Appearance Name Peculiarities Rating Cost, rubWhere can I buy
    Osram Original H4minimal risk of dazzle by high beams, long service life7150
    NARVA H4 STANDARD 48881low cost, weak “long-range”, stability of parameters throughout the entire service life6100
    Philips Crystal Vision H4decent “far”, weak “near”, long service life, comfortable color temperature, high cost5950

    The best lamps with increased luminous efficiency

    Appearance Name Peculiarities Rating Cost, rubWhere can I buy
    Osram Night Breaker Laser H4excellent light distribution, decent resource by the standards of “bright” lamps, high cost81 500
    Philips Vision Plus H4reasonable price, comfortable color temperature, high range7600
    Koito WhiteBeam III H4good brightness, white light, decent resource, good light distribution, high cost61 670
    Bosch Xenon Silver H4Good light distribution, comfortable color temperature, low resource51 100

    The best lamps with extended service life

    Appearance Name Peculiarities Rating Cost, rubWhere can I buy
    Bosch Longlife Daytime H4resource corresponds to the declared one, difficult to find on sale, low cost8260
    Philips LongLife EcoVision H4good light distribution, good resource, yellowish “near”6400
    Osram Ultra Life H4low range, afraid of power surges and shaking2500

    So we got acquainted with almost all the lamps installed in the VAZ 2107 car. Now you can buy the desired type of lighting fixture without first disassembling the lamps.

    Previous

    Car lampsHow to replace the license plate light bulb Renault Logan

    Next

    Car lampsHow to choose LED lamps for a car

    Replacing stock lamps with LED ones

    There is a large selection of LED lamps from different manufacturers on the market for any budget, but in order to purchase high-quality lighting equipment for a car, you need to know the main features that distinguish a high-quality H4 LED lamp from Chinese junk. The latter will shine poorly, their durability will be short - just throw your money away.

    They differ in design and type of LEDs used. In order not to lengthen this article, you can get acquainted with these features, how they affect the quality of the glow of LED lamps and their service life in a separate review
    on the Avtoyoutube website
    . There you will also find videos of comparative tests of halogen lamps and LEDs, a comparison of different manufacturers in terms of brightness and quality of illumination, and advice from experts in the field of automotive lighting technology on the correct selection of light for headlights.

    In order for an LED lamp for low and high beam to shine well and not blind oncoming cars, it must have:

    1. Reflective, evenly shaped protective curtain that completely covers the low beam LED crystals
    2. Diodes must be made in the form of separate crystals; the use of a COB (chip-on-board) matrix is ​​not allowed. Otherwise you will not get a clear cut-off line
    3. High-quality LEDs are considered to be crystals produced by Philips ZES or CSP. Their location on the circuit board will coincide with the location of the halogen lamp filaments, which guarantees high-quality headlight luminescence
    4. The thickness of the housing where the matrix of diodes is located and their arrangement should follow the filament of a halogen lamp.

    The screenshot above shows the main visual signs of high-quality LED lamps for H4 sockets

    . Everything else can produce a blurred cut-off line, illumination of the left side of the road, and an unclear beam of light.

    In addition, Chinese manufacturers, in order to increase sales of their products, indicate sky-high brightness numbers on the packaging. You shouldn’t believe the inscriptions of 4000-5000 lm - it’s all a lie

    . In the best case, the total luminous power of two LED lamps is indicated. You can “squeeze” a maximum of up to 2100 lm from one light bulb.

    Therefore, be careful and attentive when choosing LED lamps for your car.

    . To avoid getting into trouble, use the tips listed above. This will guarantee the purchase of high-quality H4 LED equipment for head optics.

    Good luck to everyone on the roads!

    Video on how to choose the right LED lamp with H4 base:

    Sources:

    https://subscribe.ru/group/lyubim-nashi-avtomobili-tyuning-obsluzhivanie-remont-novosti-i-poleznaya-informatsiya/16130250 https://avtoyoutube.ru/svetodiodnye-lampy-vaz-2107.php https: //www.netuning.ru/shop/vaz_2107 https://newsvo.ru/kak-zamenit-lampy-v-farah-vaz-2107.dhtm https://zen.yandex.ru/media/id/59ab872ae86a9e96d63241ad/ 5db7ec99df944400af66f889

    Rating
    ( 2 ratings, average 4.5 out of 5 )
    Did you like the article? Share with friends:
    For any suggestions regarding the site: [email protected]
    Для любых предложений по сайту: [email protected]