Review of the best stamped wheels for VAZ

Rating of stamped wheels

The market offers products from dozens of well-known manufacturers from Europe, Asia, and the United States. Stamped wheels of different sizes are available; you can choose from a VAZ or a prestigious foreign car. The VyborExperta.ru team selected brands known to car enthusiasts for testing. Basic technical characteristics were checked, the data obtained was compared with the information specified in passports or certificates. When compiling the review, reviews from car owners and the opinions of specialists from tire shops and service stations were taken into account.

Experts paid attention to the following parameters:

• Geometry - all wheels must have the same diameter, alignment deviations are not allowed;
• Anti-corrosion treatment - the better the quality of protection, the longer the consumables will last;
• The quality of stamping - detailed elaboration of the pattern, the absence of burrs that can damage the tire are important advantages;
• Quality of steel – manufacturers have different grades of steel at their disposal; the service life of the wheel depends on the selection of material;
• PCD – precision location of mounting holes ensures simple installation and increases reliability;
• Offset – affects the position of the wheel relative to the body, the load that is placed on the wheel bearings.

Not all models were able to pass testing without comments. Deviations in geometry, traces of corrosion, incorrect location of mounting holes, poor stamping quality - discs with such characteristics were excluded from our rating.

The best stamped wheels according to reviews

The famous KFZ concern produces high-quality wheel rims. In terms of technology and production, their “stamps” are almost the best in Europe. Well-known car manufacturers - VW, Alfa Romeo, Toyota - order wheels from KFZ.

Thanks to the high level of production, the company produces efficient and durable wheels at an affordable price. Certified products are represented by more than 500 standard sizes of finished products. The brand has been included in the rating of stamped wheel rim manufacturers for several years now.

Wheels from Dotz

The Germans produce not only high-quality equipment, but also steel wheels using the stamping method. The well-known brand Dotz produces models for middle and luxury class cars. Compared to KFZ, the company produces products not only for basic configurations, but also for other car models.

High-tech Dotz stampings are used by fans of fast driving and restyling. This is not the first year that the company has taken pride of place in the ranking of the best wheel stampings for cars. Reliable and durable Dotz wheels for normal driving will last for many years and provide a comfortable ride.

The best R14 stamped wheels

R14 steel wheels are installed on sedans and station wagons from VAZ, Ford, Citroen and other budget cars. The components must be of good strength and light weight. VyborExperta.ru compared the characteristics of 6 models with this radius and recommends two brands that are distinguished by high quality steel, good corrosion protection, and ideal geometry.

Magnetto Wheels 14016 5x14/5x100 D57.1 ET35

The Italian company Magnetto Wheels owns factories in 30 countries, including Russia. Products are supplied to the secondary market, for assembly line assembly to such automakers as Citroen, Suzuki, Volkswagen, GM, Renault. The company independently engages in design and production. The company supplies its products to the iconic Black Cab taxi. Our own production of rolled metal allows us to control the entire manufacturing process.

Magnetto Wheels 14016 has 5 mounting holes, 35mm offset and 5J rim width. Strict geometry ensures controllability on difficult roads. The spacing of the mounting holes complies with the current standard, allowing for installation as quickly as possible. Three-layer painting provides effective protection against corrosion.

Advantages:

• Stylish design allows you to ride without hubcaps;
• Availability of certificates;
• A wide dealer network makes products accessible;
• Low price;
• No rust;
• Availability of markings.

Flaws:

• Not detected.

During the development, the peculiarities of Russian roads were taken into account. High-strength steel was chosen for the model, and the design made it possible to reduce weight without losing strength. This provides an increased resource when operating the machine in difficult conditions.

Trebl 5220

Consumables are produced by an international company, one of whose factories is located in Yaroslavl. The enterprise is equipped with modern automated equipment and has a quality laboratory. All products are certified. The innovative painting line provides reliable protection against corrosion.

Trebl 5220 is available on the aftermarket. The wheel has strict geometry and is distinguished by good stamping quality. The model has 4 mounting holes, rim width 5J with offset 35 mm. The production uses durable, ductile steel, which, according to reviews from car owners, bends but does not break when subjected to strong impacts.

Advantages:

• Minimum amount of weights when balancing;
• High maintainability;
• Low price;
• Wear-resistant corrosion protection;
• Good resource.

Flaws:

• Simple design.

The best R15 stamped wheels

Wheels with a diameter of 15 inches have become widespread. These wheels are installed on 850 brands of cars. Among the consumers of the products are well-known auto giants: Ford, Renault, Volvo, Opel, Lada. With this radius, manufacturers manage to find a good balance between strength and weight.

TZSK Renault Logan 6×15/4×100 D60.1 ET40

The model is produced by the Tolyatti Steel Wheel Plant, which is one of the three leading manufacturers in Russia. Stamping is performed on German and Czech equipment. Painting is carried out by an Italian automated line that performs catapharesis priming. Corrosion protection is highly effective and increases service life.

The disc is stamped R15 for Renault, the components are supplied to the conveyor on which Logan is assembled - one of the most popular cars on the Russian market. The model has four mounting holes, rim width 6J and offset 40 mm. The production uses ductile steel, which helps the wheel withstand numerous dynamic impacts when driving on bad roads.

Advantages:

• Low price;
• Good maintainability;
• Correct geometry;
• Light weight.

Flaws:

• There are products with uneven coloring.

Eurodisk 64A45Z

The brand belongs to the international holding WPT, one of whose factories is located in the Leningrad region. The enterprise is equipped with modern equipment and an automated painting line. Finnish steel is used in production, which has good ductility.

Has 4 mounting holes, rim width 6J, wide offset 45 mm. Designed for completing domestic cars and budget foreign cars. The wheel has a standard design and fans of a stylish exterior will have to purchase wheel covers to make the car attractive. Ideal for a full spare.

Advantages:

• Good corrosion protection;
• Resistance to dynamic impact;
• High quality stamping;
• Light weight.

Flaws:

• Overcharge.

Which stamped wheels to choose for Lada cars

These wheels are made from carbon sheet steel. About 60% of cars in the Russian Federation and CIS countries are equipped with just such products. The reason for this popularity is its low cost. The cost of one disc in the TopDetal.ru online store is a little more than 500 rubles. The price depends on the car model for which the disc is intended and on its diameter. Buying stamps in an online store is much easier, since everything can be done right from home, even from a mobile phone.

Rating of budget stampings by manufacturer:

1. KrKZ (Kremenchug, Ukraine). Low price (1300 rubles), good design and painting characterize the wheels on the positive side. But they have a very large mass and poor resistance to side impacts.
2. Mefro (factories in South Korea and Germany). At a low cost (about 2,700 rubles) there is a complete absence of radial runout, zinc protection, resistance to side impacts on curbs. The downside is a huge number of fakes.
3. TZSK (Togliatti) - low cost (1750 rubles), light weight, high degree of strength. The disadvantages are that the metal used in production is too soft and the paint is not durable.
4. Eurodisk - low price (850 rubles), high-quality paintwork and complete absence of radial runout. But one of the disadvantages is the weakness of the metal.
5. Trebl (China). There are no radial runouts, low cost (RUB 1,225), the geometry of the disc and the quality of the paint coating are controlled during production. But China has never been famous for the high quality of its products, corrosion protection is weak, and strength indicators are low.

AvtoVAZ vehicles use wheels with a rim diameter of 12' and above. The most common are 13' and 14' - you can view the characteristics and purchase them on this page. Installation of larger sizes will require changes to the design of the vehicle. Without these changes, driving the car will be problematic - the tires will rub against body elements when turning. It depends on the make and model of the car which stamped wheels you need to buy.

The best stamped wheels R16

R16 wheels are installed on premium passenger cars, crossovers, small SUVs and commercial vehicles. The components are characterized by high strength, resistance to dynamic effects and static loads. R16 stamped wheels are installed on Ford, Mitsubishi, Volkswagen, Audi, Toyota.

GAZ Sobol 2217

The Gorky Automobile Plant produces popular commercial vehicles, equipping its vehicles with wheels of its own production. These products are subject to increased demands, since light-duty trucks are operated intensively and often in difficult conditions. Components for Sobol 2217 can withstand high static and dynamic loads and have high abrasive resistance.

The wheel has 5 mounting holes, rim width 6J, offset varies in the range of 40-45 mm. Products are available in different shades, which allows you to choose the best option taking into account the design of the machine. According to reviews from car owners, the mounting holes are made correctly, so installation does not cause problems.

Advantages:

• Well balanced;
• Reliable corrosion protection;
• Stable rim geometry;
• Wide windows for anti-skid bracelets;
• Low price.

Flaws:

• Unstable reach width.

KFZ 8312

The products of the Austrian holding Alcar are supplied to the conveyors of 14 car manufacturers. The company produces more than 4.5 million products annually, and the KFZ 8312 model is one of the most popular in the company’s catalog. In production, special grades of steel are used that combine high strength and elasticity. This makes the wheels resistant to high static and dynamic loads and ensures good maintainability.

The model has 4 mounting holes, which are correctly located on all disks. The rim width is 6.5J and the offset is 40mm. The wheels are relatively light in weight, which makes it possible to equip crossovers with good dynamics. Alcar products have good corrosion protection: according to reviews from car owners, rust does not appear in minor scratches.

Advantages:

• Stable geometry;
• Minimal balancing required;
• Long service life when used in harsh conditions;
• Easy installation.

Flaws:

• High price.

Top 5 best stamped wheels

1. KRKZ wheels
2. TZSK wheels
3. Magnetto Wheels
4. KFZ wheels
5. Treble discs

Unfortunately, it is not possible to determine the best wheels based on the results of any tests, since no automobile publication has conducted such tests for a very long time. Therefore, the main criteria for determining the best were the popularity and number of reviews for the products of each company listed above.

One of the most popular stamped wheels are KRKZ wheels. They are chosen by the majority of owners of inexpensive cars; the rating of these wheels on YandexMarket is one of the highest, and the cost, at the same time, is one of the lowest (largely due to the crisis in Ukraine).

The second most popular can be considered the wheels of the well-known TZSK plant in the country. Its products are also one of the most inexpensive and at the same time very popular and have a good rating on YandexMarket.

The next most popular are the wheels of a well-known company from near St. Petersburg with the Italian brand Magnetto Wheels. The cost of these discs is also one of the most attractive, which leads to good demand for these discs.

The fourth place is occupied by the products of the Austrian company KFZ. There is no doubt about the quality of the discs of this brand, but the products of this brand are much more expensive than other offerings on the market, and also have a low rating on YandexMarket, which determined its low place in our Top 5.

The last place is occupied by the products of the Chinese company Trebl. The cost of this company's discs is not the lowest, but they still have the lowest rating on YandexMarket.

Best stamped wheel R17

Large diameter wheels are installed on budget and premium cars. Manufacturers equip sports models, commercial vehicles, SUVs and crossovers with consumables. The large radius of stamped wheels makes the components heavier, so it is recommended to install R17 wheels on cars with powerful engines.

Dotz Dakar 7×17/6×139.7 D110 ET20

The German company DOTZ is today part of the large Alcar holding. The products are manufactured in two factories in Germany. Production volume exceeds 1.2 million discs per year. All products have European and German quality certificates. The production process uses steel, which is characterized by high strength and ductility.

The Dakar 7x17 model was developed for SUVs and pickups. Wide ventilation holes make the design more aggressive. The six mounting holes always correspond to the location of the mounting bolts. Rim width 7J, offset – 20 mm. The protective coating has good hydrophobic characteristics, which promotes self-cleaning of the surface.

Advantages:

• Reinforced design;
• Good corrosion protection;
• Resistance to dynamic impact;
• Impeccable balance;
• Precise geometry.

Flaws:

• High price.

The best manufacturers of stamped wheels

One of the largest companies producing stamped wheels in Europe. It is part of a large holding whose production is based in countries such as Austria, Switzerland, Germany, the Czech Republic, Spain and Brazil.

The manufacturer has been presenting steel stamping wheels on the market for many years. A large number of world-famous automobile concerns order stamped wheels for the basic configurations of their cars from KFZ. Brands such as Toyota, VW, Alfa Romeo are regular partners of the company. Well-established production in 35 factories located around the world allows the brand to have a colossal audience.

Innovative production technologies and the use of high quality metal help to achieve a high level of strength of the finished product. Also, stamped wheels from KFZ have an excellent design and reasonable prices.

Fully certified products are represented in more than 500 standard sizes. The selection of wheels can be carried out for absolutely any car. In Russia, the most common “stamps” are sizes R13-R16. Every year, high sales levels and excellent product reviews are guaranteed.

Advantages:

• highest reliability;
• light weight, on average 15-25% lower than that of other manufacturers;
• thanks to 3-layer coating technology, high resistance to corrosion processes is available;
• attractive design;
• wide range and variety of models;
• acceptable prices.

Flaws:

• Many buyers note that the ends of the surfaces are highly susceptible to the oxidation process.

Pedantic Germans managed to establish the production of some of the best stamped wheels in the world, produced under the DOTZ brand. Initially, the company produced products under three fundamentally different brands (in addition to DOTZ, there were AEZ and ENZO), but later united them into a single Alcar group, and now mainly produces products from the first.

The company's products are most widespread in Europe, where most of the manufacturing plants are located. The discs they produce belong to the class of elite and semi-elite, as a result of which the price for them is not low. Unlike the previous brand, this one supplies wheels to automakers to equip them with far from basic car configurations.

Young specialists, the so-called new school, are working on the creation of “stamps” at the head office in Germany. This gives tangible results; now, in addition to excellent quality, all discs have an excellent design. The product is mainly aimed at fans of fast racing and tuners. But having bought them even for everyday driving, your children will most likely think about purchasing new ones (this is not an exaggeration).

A fairly wide range and diversity of products provides the manufacturer with millions of customers every year.

Advantages:

• excellent quality and reliability;
• high level of corrosion protection;
• guaranteed operational safety;
• perfect surface treatment of the disc, no chips, scratches, cracks, etc.;
• a large number of design types;
• a wide range of.

Flaws:

• high price;
• a large number of fakes on the market.

Mefro

Another manufacturer that started its activities in Germany. The first large-scale appearance of stamped wheels for cars on the market occurred in 1997 in Russia. The company immediately managed to establish itself as an excellent brand. Today, the main production plants are located in Germany, France, Turkey, Argentina, Russia, China, South Korea.

Discs from this brand are sold everywhere due to their availability. Just think about it, about 25 million different cars are equipped with the products of this company every year, with a financial turnover of more than 400 million euros. Such numbers say a lot about the prestige of the organization.

Excellent corrosion protection, strong steel manufacturing, durability and low prices attract more and more customers to the manufacturer. It is also worth noting the versatility and diversity of production. Mefro's product range includes wheels for tractors, trucks, trailers, motorcycles and cars.

Advantages:

• excellent quality and durability of products;
• good processing that prevents corrosion;
• no safety complaints were identified;
• wide and varied range;
• low prices.

How to choose a stamped disc

When choosing components, you need to know the basic parameters of stamped wheels, pay attention to the quality of corrosion protection and brand reputation. The number and diameter of the main holes must match the fasteners. When choosing interchangeable wheels with different radii, it is worth considering the weight of the components. It is recommended to understand the basic parameters before purchasing; this will allow you to choose consumables with a long service life and high resistance to dynamic impact.

Radius

The diameter is designated by the letter R, this marking came from tire manufacturers. The recommended radius is indicated in the car's passport and nameplate, which is located on the side of the doorway on the driver's side. Manufacturers recommend 2-3 options that can be used when completing the machine. The larger the diameter, the higher the non-damping load on the suspension. Increasing the radius leads to a reduction in braking distance and an increase in acceleration time.

Number and diameter of holes

You should only install wheels on your car with the bolt pattern recommended by the manufacturer. The number of holes must correspond to the number of fasteners. The diameter of the holes must be as specified in the instruction manual. Similar diameters cannot be used. If the specified size is 4x98, it is not recommended to install wheels with a 4x100 bolt pattern. During installation, only one hole will fit exactly, the rest will be displaced, which will lead to wheel runout.

Disc offset

The greater the offset, the deeper the stamped disc sits in the wheel arch. With a small offset, the wheel protrudes outward as much as possible, which affects the exterior. The offset must be selected in accordance with the recommendations of the car manufacturer. The incorrect choice of this parameter negatively affects the wheel bearings and suspension operation. This leads to accelerated wear of all chassis parts. A drastic change in reach changes the track width, which can negatively affect handling.

Fasteners

The number of fasteners depends on the diameter: the larger the radius, the heavier the wheel. As the weight increases, the number of mounting bolts increases. The minimum thickness of a stamped disk is less than that of components made using casting technology. For this reason, fasteners of short length are used.

Which stamped disc is better?

There are no universal components; this is due to the variety of cars and differences in operating conditions. All models presented in the review are distinguished by stable geometry and high maintainability. The VyborExperta.ru team recommends the following models in their categories:

• Magnetto Wheels 14016 - a combination of bright design and high strength;
• TZSK Renault Logan 6×15/4×100 – excellent protection against corrosion;
• KFZ 8312 – do not require complex balancing;
• Dotz Dakar – reliable in the most difficult conditions.

Only wheels that provide good handling and do not have a negative impact on the suspension are worthy of the title of the best components for a modern car.

Advantages of stampings over cast wheels

When choosing wheels, many buyers ask the question - which wheels are better, stamped or cast?

In fact, everything is very simple: in difficult operating conditions, such as in Russia, stamped discs turn out to be much more practical for reasons of economy. And it’s not just their lower cost compared to cast ones. You just need to take into account that when driving on bad roads there is a high risk of disc damage.

For an alloy wheel, any damage can be the last - alloy wheels are very easily destroyed and practically cannot be repaired. Even if the damage did not immediately lead to the destruction of the disk, it quite likely changed its internal structure, which is why such a disk no longer provides adequate traffic safety and its operation is dangerous.