Which seats are suitable for the VAZ 2107 without modifications?

Repair of front seat slides

VAZ front seat slides include the following parts:

Repair of seat mechanisms is carried out with the seats already removed. To restore the functionality of the mechanism, the following operations should be performed:

• clean from dirt;
• if necessary, replace worn or damaged parts;
• lubricate

Dismantling the slide is done as follows:

1. Remove the spring.
2. Remove the rod pin.
3. Unscrew the bolts securing the slide to the seat.
4. Remove the skids.
5. Remove the screw rod from the bracket.
6. Move the sliders along the guides.
7. Remove sliders and rollers.

After disassembly, you can inspect the parts to determine the cause of the breakdown. The lack of fixation of the seat back of the VAZ 2107 can be eliminated by replacing it (or replacing the comb or clamp). To do this, you will have to cut off the broken part with a grinder and weld a new one in its place. (More details here) The upholstery of the chair must be protected from welding by covering it with a wet cloth. If possible, it is better to leave one frame of the chair before welding. At the same time, you can wash the seat upholstery.

Step-by-step instruction

First, the front seats are moved all the way forward (to provide access to the rear brackets). Then the chairs are moved back. To unscrew the bolts you will need a “13” wrench. Disconnect the electrical connector from the front seat. The next stage is dismantling the seats.

If necessary, factory seats are replaced with new analogues. Before installing the seats, you will need to make sure that the guide rails are parallel. Then the regulator is raised and the seat is moved back all the way.

The brackets are tightened to a torque of 20 N.m. The seats are moved forward, the rear brackets are tightened using the same method. The wires are connected to the battery. If the slides are installed, they are lubricated with Fiol-1 or Litol-24.

To tune the interior of the VAZ 2106, you will also need to remove the rear seat. First, experts advise studying the design of the rear seat. This sofa consists of a cushion and a backrest. The first element is fixed with two spikes welded to the body of the “six”. These spikes are installed in special holes located along the edges of the sofa.

Rear seat repair

The backrest of the rear seat can be easily removed. To do this, you need to lift it slightly so that the staples are separated from the latches. To remove the saddle, you should grab it by one edge with both hands and pull it up strongly, this will ensure it moves away from the lock. Then the same is done with the other side, after which the repair can begin.

Read, it may come in handy: Installing a VAZ-2107 radio: how to connect correctly

Fastening the front seats

Many owners of the VAZ 2107 model, which has already been discontinued, want to decorate the interior by installing seats from other car brands. This primarily applies to the front seats. In this case, you should pay attention to UNP products. Which seats are suitable for VAZ from the company’s catalog? Almost everything. You can choose anatomical seats, such as “Boxer”, “Racer”, “Sport”, etc. They are quite lightweight, since the frame is made of durable fiberglass, have a steel frame and a bucket shape with side supports, which increases the quality of driving. The seat backs often have reinforcing pads, and the headrest is integrated. The seats are thin due to fiberglass, which gives additional space to passengers sitting in the back.

Sports UNP seats are perfect for the VAZ 2107. They have maximum lateral support, a one-piece design, an integrated headrest, allow you to install sports belts (3-6 attachment points), additional pillows, including lumbar support. All UNP products can be easily integrated into any car due to the availability of installation adapters, which are sold along with the seats. In the case of the VAZ 2107, we are talking about the slide and side mounting brackets.

Installing a sports or anatomical car seat is not a cheap pleasure, so many car enthusiasts want to know whether seats from a foreign car will fit in a VAZ 2107. Experts believe that almost anything that fits the dimensions can be supplied if it is possible to carry out high-quality welding work. For example, in the “seven” you can try to put parts from Opel (Vectra A, Cadet) or from Skyline.

It should be borne in mind that the installation of non-original seats may raise questions from regulatory authorities, since such an operation is considered to be making changes to the design of the machine.

Tip 4: How to remove a car seat

There are situations in which a car owner needs to remove the seats from his car. The reason may be repair, cleaning or replacement of seats. It is not always worth contacting an expert with this problem. It is also possible to remove the seat

You will need

• - wrench;
• – screwdriver (phillips).

Instructions

1. Open the car door wide to remove the rear seat . Later, you will find a small handle from the pillow lock. It is located under the pillow on the side. Press this handle without applying much force so as not to break it, because it will be quite difficult to buy the same one anywhere. Take special care when pulling out the pillow, lifting its edge. Then go around the car and do the same on the other side. This is necessary so that all ends of the seat cushion are disconnected from the grooves. Pull the cushions out of the passenger compartment, lifting them slightly.

2. Set the head restraints to the lowest position and, using significant force, pull them up until they stop. In order to remove the head restraints from the back of the rear seat, you need to reach the latch and press it.

3. Look for the release strap on the back of the seat and begin to pull it up. If the seats in the cabin have been reupholstered, you may not be able to feel it the first time. But rest assured, it is there anyway. It is possible that the latch may jam during operation, then try again several times. If the result is still not achieved, lubricate this mechanism with lithol, and then remove all the elements.

4. To remove the front seat of a car, place the lever in the middle position. Unscrew the bolts on both sides of the runners, then press the lever and move the seat as possible, and then immediately up as much as possible. After this procedure, the seat should automatically detach from the runners on which it is attached.

5. Find the bolt connecting the backrest to the seat and unscrew it if you want to remove the seat in parts. After this, unscrew the backrest adjustment wheel from its socket. It is located on the side of the seat. Later, remove this backrest from the grooves of the seat and carefully remove it from the passenger compartment.

Video on the topic

Note! The plates may be in different conditions. If the vehicle has been used for a long time, surface damage is acceptable. Be careful with the force you use!

Useful advice Do not try to lift the pillow from both sides at once when you climb into the cabin.

Which seats fit without modifications?

If there is a desire to change the seats in the cabin of the seven, then you need to install seats from a foreign car, which are characterized by increased comfort. In this case, a problem arises - the cost of seats from foreign cars is sometimes 2 times higher than the price of new seats for the seven. To reduce costs, you need to choose used models of chairs that will cost no more than new factory models.

To install new seats in the interior of the seven from a foreign car, the following factors must be taken into account:

1. Dimensions or dimensions of devices, which should not be much larger than standard ones. There are no problems with this, since seats from foreign cars are not only comfortable, but also often have small dimensions, that is, they are compact.
2. Mounting type. The brackets for the new seats, ideally, should fit the mountings in the cabin, so that they can be installed in the classic cabin without modifications. This factor plays an important role, since the fastening affects not only the possibility of placing seats in the VAZ 2107 interior, but also the safety of their operation. In most installation options, it is still necessary to make or select some spacers, washers or bushings in order to align the mounting points of the skid and the car body. But there is no need to weld or cut anything with a grinder.
3. Shape and type of cladding. These are secondary factors that affect the comfort and appearance of the cabin. Most models of seats from foreign cars have a quite presentable appearance, and their installation does not require the use of covers.

By installing or replacing VAZ 2107 seats with analogues from a foreign car, you can simultaneously obtain benefits such as increased comfort, as well as changing the interior design for the better. No matter what model of foreign car the seats in the seven are installed on, they will still look better than the standard ones. Taking into account the factors described above, it is necessary to figure out which car the seats for the seven are suitable for. Preference should be given to the following brands:

• The 1993 Toyota Corolla E100 is an ideal option, since the interior of the LADA 2107 fits not only front seats without any special modifications, but also a rear sofa. In addition, devices from a car of this year of manufacture will not cost exorbitantly, so you can buy them very cheaply at a disassembly site.
• The 1996 Mercedes W210 is another good option. Reviews from car owners who have installed Mercedes seats indicate a number of advantages - no need for modifications, comfort, improved interior design.
• Toyota RAV4 - you also don’t need to make any modifications, you just buy, change and enjoy.
• Ford Scorpio - devices from the Ford brand are distinguished by their presentability. By installing such seats, you can enjoy long trips in a domestic car.
• Audi A80 - can be made without major modifications. The result of the replacement is a high quality of comfort, a large number of controls and settings, as well as a change in the interior of the cabin.
• Mazda 6 - fits perfectly under the standard brackets of the classics.
• Ford Recardo - you can completely install both the front and rear seats on the VAZ 2107.

Read, it may come in handy: Installing a central lock on a “seven” with your own hands (photo, video)

You can also install devices from car brands such as Skoda and Fiat. However, there are some features that need to be taken into account - this is a shift in the center of gravity. Having installed such chairs, you will need minor processing in the form of making a couple of holes, performing additional fastening. This will increase the stability and reliability of structures.

If desired, you can put seats in the seven from almost any modern car. And now their choice is huge. Such chairs can have all kinds of electrical adjustments, separate heating of the back and cushion, leather chairs can have ventilation, as well as a massage option.

There are a sufficient number of options without modifications, and which one is better to choose - it all depends on the finances, availability and desire of the car enthusiast. If you choose devices from Volkswagen, Nissan and Peugeot cars, then you cannot do without modifications. If you are sure that these brands have the best chairs, then if you wish, you can insert them into 2107, but you will have to modify the fastenings.

Spacers for the slide to level the tilt of the pillow

Options

First, it’s worth considering which seat options can be used in the VAZ 2107. Here you need to take into account the mounting features, as well as the dimensions of the seats. After all, this item should not only match the fastenings, but also fit normally in the cabin. There are examples when the seat is too high or interferes with driving. Therefore, you need to make your choice very carefully.

Many drivers claim that seats from a 1996 Mercedes W210 are optimally installed in this model. Such seats can be seen in many “sevens”. Moreover, the owners claim that no modifications were required for installation. Everything fit into the fastenings, as if it had been specially designed.

You can install seats from a 1993 Toyota Corolla in a similar manner. This option also does not need to be modified. We just install it, fasten it in the standard way, and move on. All fasteners fit perfectly.

If desired, you can install almost any seats from Skoda and Fiat. They are completely the same in terms of the size of the sled, as well as the main fastenings. But, there is one caveat. These seats have a slightly shifted center of gravity. Therefore, for greater stability and reliability of the resulting structure, it is recommended to add a couple of additional holes for fastening on each side.

Without modifications, you can install seats from Volkswagen, but this option is practically not used in practice. The reason is that the seat height is too high, making it inconvenient for drivers to operate the car.

It is also possible to supply options from Peugeot and Nissan. But there are a number of difficulties here. Installation will require a lot of reworking of the fasteners, which will take quite a lot of time. There may also be problems with seat settings.

Which seat is suitable for VAZ 2107? So many options

If you decide to modify a domestic “classic”, then you should figure out which seat is suitable for the VAZ 2107. It should be noted that the original seats do not have a high level of comfort. Therefore, VAZ drivers often prefer to install seats from other models. This allows you to make the car interior more comfortable and convenient. In practice, there are many options that are perfect for your car and also require virtually no modifications. You just need to choose the option that suits you best. There are also a number of models from which chairs can be installed with minimal modifications.

Which seat is suitable for VAZ 2107? In fact, the answer to this question is quite simple. There are quite a large number of options. A lot here depends on the capabilities of a particular driver. Not all of the acceptable seats can be quickly found in good condition. Also, some of them can cost quite a lot, this factor is also worth taking into account.

Installing a new seat

Let’s look at some of the nuances of installing foreign-made seats in “classics”. True, we will analyze only the most common problems. After all, each chair has its own requirements for installation and it will not be possible to describe all the options step by step in one article. Drivers usually face the following difficulties:

1. A common problem is the misalignment of the mounting slides. In this case, you will need to install the skids from the “original” car. To do this, you will need to drill additional holes for fastening in the bottom. Do not forget to carry out anti-corrosion treatment;
2. The simplest drawback is that the driver's seating position is too low. As a result, you cannot fully control the traffic situation. To avoid this problem, it is recommended to weld cross members into the bottom and install the seat slides on them;
3. Also, some drivers want to install an electric seat drive on the VAZ 2107. This approach allows them to be adjusted without effort. The process of installing an electric motor is not complicated. But, be sure to connect through a fuse. Moisture often accumulates on the floor of the car, which can lead to a short circuit.

Sources:

• https://automotogid.ru/remont-perednego-sidenija-vaz-2107/
• https://semerkavaz.ru/raznoe/zamena-sidenijj-na-vaz-2107/
• https://expertVAZ.ru/2107/remont-sidene.html
• https://provaz07.ru/salon-i-kuzov/kakie-sidenya-podxodyat-na-vaz-2107.html
• https://www.vazzz.ru/kakie-sidenya-ot-inomarki-podhodyat-na-vaz-2107-bez-peredelok/