Replacing windshield wipers on a Priora with your own hands: choosing suitable models, how often you need to change them, replacement instructions for different options

Size of brushes for Lada Kalina, Priora, Granta cars

The wipers on these cars are not symmetrical.
On the driver's side they are 60 cm long, and on the passenger side - 40 cm. It is noteworthy that in this case the wipers cannot be replaced with larger ones. The rear clear has a length of 36 cm and also does not change. As for Lada Priora cars, their wipers are also not the same. On the driver's side they are 53 cm long, and on the passenger side - 50 cm. In this case, only passenger options are allowed to be changed. Those who wish can use smaller ones, 48 ​​cm long, or larger ones - 51 cm. As for the rear wiper, in this case it is smaller than that of the Lada Kalina - 33 cm.

Lada Granta cars have the same cleaners as the Lada Kalina. So the dimensions are as follows:

• driver's brushes – 60 cm;
• passenger – 40 cm.

To summarize, we note that windshield wipers for cars are very important, especially in winter, when it snows and the road is practically invisible. They are also needed during rain, in order to clean the windows and not interfere with visibility on the road.

No car is produced without these devices. In general, glass cleaners on modern cars do not differ much from older brands.

The only thing is that the technical characteristics of the new models are more advanced. Previously, brushes could only remove water from the glass, but now they are able to remove dirt, midges, snow, etc. Thanks to this, visibility is significantly improved. Modern wipers are resistant to even the most severe frosts. They are made from durable materials and are divided into winter and summer.

If the brushes are smaller than expected, then due to the small cleaning area, the overall level of efficiency of the windshield wipers will decrease. Plus, an island of dirt and water forms in the center of the windshield, which will significantly impair visibility while driving. Let us recall that in the previous article we looked at why the stove fan does not work and how to repair it yourself.

Size of windshield wiper blades for Lada Samara series cars (2115, 2114 and 2113)

These cars leave the factory with seven-fold windshield wipers, which are 51 centimeters long. If replacement is necessary, you can use a 53-centimeter-long windshield wiper for the driver's wiper, but on the passenger side you will have to leave a 51-centimeter-long blade, since if you install an extended wiper, a “waterfall” will form in the center of the windshield.

Note that Lada Samara cars also have rear wipers. Cars leave the factory with a windshield wiper 30 centimeters long, but you can install a blade 33 centimeters long - this will not cause any problems. Note that, if you wish, you can even install brushes 40 centimeters long, but you will need to move a couple of teeth on the wiper motor to adjust its stroke.

All models of cars produced by the AvtoVAZ automobile concern indicated in the title of this section of the article are the progenitors of the Lada Samara series. It is for this reason that their front wipers are symmetrical, just like those of their descendants, and have a length of 53 centimeters.

Lada Kalina windshield wiper blade size

Lada Kalina cars have non-symmetrical wipers. So, on the driver’s side the wiper blade is 60 centimeters long, and on the passenger side – 40 centimeters. At the same time, liberties with the size of the driver’s “wiper” are not allowed, but the passenger one can be increased to 41 centimeters. The rear windshield wiper blade on the Lada Kalina is 36 centimeters long.

https://www.youtube.com/watch?v=pl7_9CmEXq4

Lada Priora windshield wiper blade size

Lada Priora cars are equipped with asymmetrical windshield wiper blades. On the driver's side, the wiper is 53 centimeters long, and on the passenger side it is 50 centimeters long. As in the case of the Lada Kalina, liberties are allowed only with the passenger “windshield wiper”. You may notice a standard windshield wiper that is either 48 centimeters or 51 centimeters long. The rear wiper on the Lada Priora is 33 centimeters long.

Lada Granta windshield wiper blade size

Lada Granta cars inherited the glass cleaning system from the Lada Kalina car. In this regard, the length of the driver's windshield wiper is 60 centimeters, and the passenger's is 40 centimeters, but it can be replaced with a windshield wiper 41 centimeters long.

How to remove without a puller

Actually, there are a lot of instructions on the Internet on how to do this without any side tools.

The procedure is approximately this:

• Unscrew the nut and remove

• The leash will sit very firmly, especially if the car has a long mileage, say 100,000 kilometers

• We try to remove it, but it won’t come off. I would like to note that it works for some, but judging by the reviews, only 10% of them do.
• WD-40 into the connection so that it acidifies a little. I stood there for about 2 – 3 hours and nothing worked

• We knock on the connection to loosen it a little. This is done with whatever is at hand, I personally get this feeling. Some with a mallet, some with a hammer, others with a wrench and so on. IT DIDN'T WORK FOR ME.
• After all these manipulations, we are trying to pull off the holder, but someone lifts the brush up and pulls it! Some people simply pull the eyelet itself, others put the nut back on and pull the eyelet up and the blade itself down (it turns out like a lever). BUT the damn thing was just sitting there, like it was boiled, and it turned sour, so sour.

• There is one last point. Someone is trying to place a block next to the wiper and pry it with something metal! This is good if you have a body nearby, that is, metal, but I have plastic and it’s almost impossible to do this

Let me say this, some people can remove the leash with their own hands! Others don't. In general, on DRIVE they write that it is better to go to a service station and they will take everything down for you. Now let's move on to the most interesting part.

How to choose the right size of windshield wipers for a Lada Granta without compromising their quality?

Replacing brake pads with your own hands: how do you know when it’s time to change?
step-by-step instructions on how to replace brake pads on a car (90 photos) The safety of the driver and passengers primarily depends on the quality of cleaning the windshield, so every car owner must control this issue. Wipers are classified as consumables, so sooner or later every car enthusiast will be faced with the need to replace them. What size is the Lada Granta windshield wiper and in what cases do the blades need to be changed - we will tell you more about this below.

There are several signs that indicate that the purifiers need replacing:

1. The primary and most important is poor cleaning quality of the windshield, the appearance of streaks and streaks when fluid is supplied from the washer reservoir. As a result of wear of the blades themselves installed on the wipers, the quality of glass cleaning is reduced to a minimum. Poor cleaning results in obstructed visibility.
2. The appearance of noise and squeaking when the wipers operate. As a rule, extraneous noise appears after the brushes begin to wear out and the glass is poorly cleaned. But there are also cases when the sound appears first, and only then the ineffectiveness of the brushes. So if you notice squeaking or noise, keep in mind that you will have to change your wipers soon.
3. The glass began to darken. As a rule, darkening of the glass is caused by the use of a low-quality washer, but the reason may also lie in damage to the rubber blade. This will cause the angle of the wiper edge to be offset.
4. The windshield wipers seem to “jump”. As a result of an increase in lifting force, the following problem appears - the wipers begin to work faster, and accordingly, they can jump over some areas of the glass surface.

The brush does not adhere tightly to the glass surface

Brush sizes

Standard sizes of windshield wipers for Grant:

• according to the technical manual, the size of the driver's wiper is 600 mm;
• The size of the passenger cleaner is 410 mm.

Alternatively, you can use longer windshield wipers:

1. On the passenger side, you can install a longer wiper, its size should be no more than 450 mm, this will allow it to engage a larger amount of surface.
2. As for the driver's brush, it is better not to experiment here. For example, if you install a 610 mm wiper, this will cause it to touch the car body during operation, and accordingly, a knock will appear (video author - TheLadaKalina 2).

Types of wipers

There are two types of wipers for the Lada Granta:

1. Frameless. Such products are better pressed against the surface of the windshield, which allows for better cleaning. Due to the absence of a frame, such devices practically do not freeze during the frosty season, which greatly simplifies their operation in winter. In addition, when operating at high speed, frameless products produce an order of magnitude less noise.
2. Frame. This option is older, since it was previously widely used on many cars. Their cost is lower, but they are equipped with a frame, which in any case will freeze during cold weather. However, products of this type tend to cause less damage to the surface of the windshield, since they are not pressed against it as tightly, unlike frameless options.

There is also a hybrid version of the product, but it has the same characteristics as frame wipers, so we do not recommend choosing it. The most technologically advanced option is frameless products, but their cost is higher (the author of the video is the remgar channel).

Recommendations for selection

Let's consider several product manufacturers:

1. Frameless Bosch Aerotwin. Belgian-made products are equipped with native fastenings; the main advantage is a long service life, as well as aerodynamics and the absence of extraneous sounds during operation.
2. SWF VisioNext - also of the frameless type, equipped with a hook-type fastening. The products are manufactured by Valeo, which also produces many other types of components and parts for cars.
3. Bosch Twin Spoiler frame brushes. Dimensions fit standard Granta windshield wipers. Despite the fact that the products are frame, they are quite reliable and have a long service life.
4. Champion Aerovantage. This manufacturer has been on the market for quite a long time, during which time it has been able to win the trust of many of our compatriots. The products belong to the premium segment of the market and are equipped with a steel frame.

Choosing a wiper based on weather conditions

Nowadays, there are many different types of wipers. Each of them implies its use in certain conditions. They are divided into two types: summer and winter.

Summer

In the summer, even inexpensive wipers can provide good cleaning of the windshield. Since weather conditions allow the cleaning gum to remain elastic for a long time. Therefore, in the summer, you can use any type of wipers. But frameless ones cope best with large amounts of moisture on glass; they have a more expensive price compared to their competitors.

The cost of frameless wipers starts from 300 rubles per piece.

The cost of frame brushes is from 100 rubles per piece.

Winter

In winter, at low temperatures, snow or ice frozen on the windshield begins to melt and drain when the heater operates in the cabin. This greatly interferes with visibility; ordinary windshield wipers are not able to cope with this task, since their rubber band will “stiffen” at low temperatures and will not press tightly against the windshield.

Winter glass cleaners are able to remain flexible during low temperatures. These wipers are framed and have frame protection from snow and ice getting into them.

The cost of winter wipers starts from 500 rubles per piece.

In winter, the use of frameless wipers is not advisable because when brushing a large amount of snow off the glass, such a brush is more likely to be damaged.

How to choose the right size of windshield wipers for a Lada Granta without compromising their quality?

How often should you change antifreeze?

The safety of the driver and passengers primarily depends on the quality of windshield cleaning, so every car owner must control this issue. Wipers are classified as consumables, so sooner or later every car enthusiast will be faced with the need to replace them. What size is the Lada Granta windshield wiper and in what cases do the blades need to be changed - we will tell you more about this below.

There are several signs that indicate that the purifiers need replacing:

1. The primary and most important is poor cleaning quality of the windshield, the appearance of streaks and streaks when fluid is supplied from the washer reservoir. As a result of wear of the blades themselves installed on the wipers, the quality of glass cleaning is reduced to a minimum. Poor cleaning results in obstructed visibility.
2. The appearance of noise and squeaking when the wipers operate. As a rule, extraneous noise appears after the brushes begin to wear out and the glass is poorly cleaned. But there are also cases when the sound appears first, and only then the ineffectiveness of the brushes. So if you notice squeaking or noise, keep in mind that you will have to change your wipers soon.
3. The glass began to darken. As a rule, darkening of the glass is caused by the use of a low-quality washer, but the reason may also lie in damage to the rubber blade. This will cause the angle of the wiper edge to be offset.
4. The windshield wipers seem to “jump”. As a result of an increase in lifting force, the following problem appears - the wipers begin to work faster, and accordingly, they can jump over some areas of the glass surface.

The brush does not adhere tightly to the glass surface

Brush sizes

Standard sizes of windshield wipers for Grant:

• according to the technical manual, the size of the driver's wiper is 600 mm;
• The size of the passenger cleaner is 410 mm.

Alternatively, you can use longer windshield wipers:

1. On the passenger side, you can install a longer wiper, its size should be no more than 450 mm, this will allow it to engage a larger amount of surface.
2. As for the driver's brush, it is better not to experiment here. For example, if you install a 610 mm wiper, this will cause it to touch the car body during operation, and accordingly, a knock will appear (video author - TheLadaKalina 2).

Types of wipers

There are two types of wipers for the Lada Granta:

1. Frameless. Such products are better pressed against the surface of the windshield, which allows for better cleaning. Due to the absence of a frame, such devices practically do not freeze during the frosty season, which greatly simplifies their operation in winter. In addition, when operating at high speed, frameless products produce an order of magnitude less noise.
2. Frame. This option is older, since it was previously widely used on many cars. Their cost is lower, but they are equipped with a frame, which in any case will freeze during cold weather. However, products of this type tend to cause less damage to the surface of the windshield, since they are not pressed against it as tightly, unlike frameless options.

There is also a hybrid version of the product, but it has the same characteristics as frame wipers, so we do not recommend choosing it. The most technologically advanced option is frameless products, but their cost is higher (the author of the video is the remgar channel).

Recommendations for selection

Let's consider several product manufacturers:

1. Frameless Bosch Aerotwin. Belgian-made products are equipped with native fastenings; the main advantage is a long service life, as well as aerodynamics and the absence of extraneous sounds during operation.
2. SWF VisioNext - also of the frameless type, equipped with a hook-type fastening. The products are manufactured by Valeo, which also produces many other types of components and parts for cars.
3. Bosch Twin Spoiler frame brushes. Dimensions fit standard Granta windshield wipers. Despite the fact that the products are frame, they are quite reliable and have a long service life.
4. Champion Aerovantage. This manufacturer has been on the market for quite a long time, during which time it has been able to win the trust of many of our compatriots. The products belong to the premium segment of the market and are equipped with a steel frame.

Dimensions

It should be noted: a feature of this car is the ability to install custom-sized wipers. If the length is more than 508 mm, no difficulties will arise. The following sets of pairs of brushes can be installed:

• 550 mm + 500 mm;
• 530 mm + 530 mm;
• 530 mm + 510 mm;
• 530 mm + 500 mm.

The operation process itself usually does not cause problems. But you need to remember that the increased weight, length and generally non-standard design have a greater impact on the gearbox, engine and slots - on which the leads are installed. Long-term increased load, especially at high speed, can lead to rapid wear of the splines. Or failure of the electric motor.

Original articles

AvtoVAZ, like many other car manufacturers, does not independently manufacture small parts. Including brushes. The official supplier of VAZ wipers until 2021 is Bosch. The products of this company are supplied to the AvtoVAZ plant. After which it is packaged in original boxes.

But it should be noted that purchasing original components does not affect the warranty. No problems during installation, as well as during operation, are also guaranteed

It is only important to carefully examine the box. Because there are a lot of fakes on the market. Windshield wiper blades have the following part numbers:

Windshield wiper blades have the following part numbers:

Replacement options

Finding and purchasing original windshield cleaning blades is not a trivial task. It is much easier to purchase high-quality analogues

It is only important to pay attention to the article number, as well as the length. The cost varies depending on the brand, quality and type of brushes themselves. The following varieties are presented on the market in the Russian Federation for 2021:

The following varieties are presented on the market in the Russian Federation for 2021:

The following varieties are presented on the market in the Russian Federation for 2021:

• frame;
• frameless;
• hybrid;
• winter.

Frame

Frame modifications are also often called classic. They have an important drawback: at high speed, due to an unsuccessful aerodynamic shape, the degree of cleaning is significantly reduced. But some models are equipped with a special spoiler. Due to this, air resistance is reduced. The advantage of frame brushes is their low cost.

Frameless

Frameless ones are made of a single piece of rubber. This makes it easy to clean the surface of the windshield even at high speed. Air resistance will be minimal. The cost of wipers of this type is slightly higher than frame ones. But they are more convenient to use. Removing and replacing old brushes of any type with new frame ones will not be difficult.

Hybrid

Hybrid wipers combine the advantages of frameless and frame models. They are brushes made entirely of rubber. But having a rigid frame made of metal or other materials. They do a good job of cleaning the windshield even at high speed on the highway. This applies to both normal precipitation in the form of rain or snow. So does dust and road dirt.

Winter

Winter wipers are distinguished by their elasticity - even at sub-zero temperatures they clean the glass well

But it is important to remember that their price is usually an order of magnitude higher than regular ones. Because they are more expensive to produce. In this case, to avoid rapid wear of such parts, you can purchase them as replacements.

And install only in difficult weather conditions. For example, in winter

In this case, to avoid rapid wear of such parts, you can purchase replacement parts. And install only in difficult weather conditions. For example, in winter.

How Priora wipers should work correctly

Wiper design

The main parts of the windshield wiper are the supporting frame and the cleaning element.

The supporting frame is made of metal or plastic. Wipers with a metal frame are more durable and strong. This frame is used to make winter windshield wiper blades.

Wipers with plastic frame

There is another type of brush design - frameless brushes. The frame in such brushes is a cleaning rubber band and the wiper itself is made entirely of rubber.

The cleaning element is made of soft rubber or silicone, which ensures a tight fit to the windshield and excellent cleansing of moisture.

Wipers for Lada Granta dimensions

Foreign manufacturers indicate the length of the windshield wiper in inches, so the suitable length for a passenger blade is 16″. Sixteen inches - 406 mm, probably because of this, brushes with lengths of both 40 and 41 cm can be installed on the right side of the Granta. If desired, you can install a passenger windshield wiper up to 45 cm, but I would recommend staying in the range of 400...410 mm.

I have added brush article numbers to the selection: they will help you find specific products in stores that sell auto parts (this is faster and, most likely, cheaper). Also, the articles will allow you to avoid compromises in the form of several centimeters in the length of the brushes - choose only what is made specifically for your car.

Finally, a comparison of prices for windshield wipers.

Frameless wipers on Granta

An excellent option is the Bosch Aerotwin kit (code - AR601S, article number - 3397118907). This is a set of brushes with a length of 600 and 400 mm, which are produced in Belgium, with a “native” and single fastening. They clean perfectly, do not creak, are durable, and aerodynamic. Read more about the Bosch Aerotwin line.

A good option is two SWF VisioNext brushes: 600 mm (code - 860, article number - 119860) and 400 mm (code - 840, article number - 119840). These wipers are also designed to be mounted on a “hook”. SVF is part of the Valeo group; windshield wipers are produced in Poland and France. Read more about SWF wipers.

An available option is two brushes from the St. Petersburg company Horse Ballistik, 60 and 41 cm. When installing, you will have to use an adapter for attaching the “hook”. If you are offered a choice when purchasing, take the option with a rubber tape - it squeaks less.

Hybrid wipers for Granta

An excellent option is a pair of Denso Hybrid brushes: 600 mm (article number - DUR-060L) and 400 mm (article number - DU-040L).

Denso wipers are a modification of frame windshield wipers, covered with an aerodynamic casing on top.

Frame wipers for Granta

Take a look at the pair of Champion Aerovantage single wipers: 600 mm (ref. A60/B01) and 400 mm (ref. A41/B01). Champion Aerovantage - premium quality brushes with a full metal frame

A good option is a set of frame wipers Bosch Twin Spoiler 601 S (article - 3397010297), which can accommodate a pair of 600+400 mm. Reliable frame wipers with spoiler, made in Belgium.

Radiator grill VAZ 2107 chrome

Finally, I would recommend perhaps the most inexpensive frame windshield wipers with a famous brand - a pair of Bosch Eco frame wipers: 60C (3397004673) and 40C (3397004667).

Video of installing wipers on Priora

Look at an example of installing Bosch Aerotwin brushes with a hook mount:

The length of the windshield wipers on the Lada Priora on the driver and passenger sides is 20″ (508 mm), the rear ones are 13″ (330 mm).

Standard sizes of wipers on Lada Priora:

The size of brushes for Lada Priora depends on their location and the type of car body.

Wiper parameters for hatchback and station wagon:

• Length of driver's windshield wipers: 508 mm (20″).
• Passenger wiper length: 508 mm (20″).
• Rear wiper length: 330 mm (13″).

Windshield wiper parameters for a sedan:

• Length of driver's windshield wipers: 508 mm (20″).
• Passenger wiper length: 508 mm (20″).

Important: the rear wiper is not included in the factory equipment of the Lada Priora sedan. If necessary, the original frame wipers for this Lada model can be replaced with alternative sizes - 530 and 510 (mm), 550 and 500 (mm) or 630 and 480 (mm)

Increasing the size allows for better glass cleaning

If necessary, the original frame wipers for this Lada model are replaced with alternative sizes - 530 and 510 (mm), 550 and 500 (mm) or 630 and 480 (mm). Increasing the size helps to clean the glass better.

Possible sizes of wipers on the driver's side for Lada Priora of all years of production.

Data in inches.

Possible sizes of wipers on the driver's side for Lada Priora of all years of production.

Data in inches.

Possible sizes of rear wipers for Lada Priora of all years of production.

Possible sizes of wipers on the driver's side for Lada Priora of all years of production.

Data in inches and (mm).

Possible sizes of wipers on the driver's side for Lada Priora of all years of production.

Data in inches and (mm).

Possible sizes of rear wipers for Lada Priora of all years of production.

Data in inches and (mm).

Replacement

Replacement should only be carried out with the hood closed, otherwise the wiper will not rise.

With the wiper raised, pull the wiper blade down with controlled force. After which the brush will be removed.

If the wipers have not been changed for a long time, then it is necessary to apply quite a bit of force, since the debris and dirt accumulated over the period of operation acted as “glue” and firmly fixed the brush in its seat.

Before installing a new brush, it is necessary to clean the surface of the hook from rust.

Installing a new brush is done by inserting the brush into the wiper hook.

The wiper blade replacement process is complete.

Source

FakeHeader

Comments 20

It's strange how they fit in with you? I had a 51 cm passenger side that touched the plastic along the edge of the glass. Right now I set the driver’s to 54-53 and the passenger’s to 47, everything is fine... but 56 won’t fit there...

On a Priora, the wind slats get in the way, but I have a Ten-Prior.

How is this “ten-prior”?

At first it was just 2110. And then it started! Nowadays, the Priora’s filling is luxury, but not everything is finished yet. Read the introduction to the blog.

My driver's license is 53 and the other is 50. It won't fit anymore.

The wind slats interfere with the Priora.

I thought you didn’t check the prior...

I seem to have these from the factory, if I'm not mistaken))

The dealer could have supplied it or you are mistaken.

Look at my main photo, it looks the same)

I have 54 cm and they barely climb on top of each other, but your 56 cm is probably a lot

I don’t know how he “climbs a little,” but everything works well for me.

Not. They also work great, I mean, when not working, the left brush rests slightly on top of the right one.

This means it is not installed correctly, it must be placed in the lower position.

I put it in the lower position, I have frameless ones, there are no two positions on the bracket, only in the middle. Anyway, the factory recommends 50 cm, no more.

We replace the brushes when the quality of windshield cleaning deteriorates, approximately once a year - preferably before the start of the autumn-winter period. The length of both windshield wiper blades is 500 mm. When purchasing imported brushes, you should focus on the size of 20′ or 510 mm. If the brushes are very dirty or covered with ice, they should be removed and cleaned. Brushes should be washed periodically under the tap with warm water and soap.

Be careful when removing the brushes: the lever under the action of the spring may suddenly drop onto the glass and break it. To do this, move the lever with the brush away from the windshield.

By pressing the brush locking tab...

...move the brush from the hook of the lever so that the brush lock comes out of the hook.

Remove the brush from the lever. If you need to replace the brush retainer, move it from the brush axis and remove it. Similarly, remove the other windshield wiper blade.

Read more: Daewoo nexia on-board computer

Frameless type brushes can be installed on the car. Install the brushes in reverse order.

Windshield wipers, wipers, brushes - all these are elements of one device on a Priora car. They help the driver clear the windshield from raindrops and melting snow. There are many manufacturers on Priora whose brushes fit the car without any problems. Read the article to the end and find out the full list and prices of manufacturers. Let's say the following: the average price starts from 300 rubles. The quality of their work is specified in technical regulations, but even the driver himself will not be happy if the wipers do not clean the glass well - driving blindly is dangerous. The Priora car has three wiper speed modes - which helps cleaning in any rain. To clean the rear window, a rear wiper is installed on three car bodies. The sizes of wipers on Priora are the same in all bodies: hatchback, station wagon, sedan.

The windshield wipers on the Lada Priora have to be changed periodically, just like in any other car. New elements of the cleaning device are chosen with special care - it is easier to buy a good pair so that it works for a long time, for an above-average amount, than to constantly buy the cheapest one, being nervous because the wiper blades do not clean anything.

If the wipers on the Lada Priora do not work, this is a reason to understand the system and try to correct the situation. There may be several reasons: freezing to the glass, the wiper wiring is shorted, or the wiper motor simply cannot cope with the resistance - I’ll tell you more about this later. Thank God on a Priora car this is, firstly: not a common problem, and secondly, the price of the motor starts from 2500 rubles. If the brushes are not working, it is recommended to travel by vehicle only in dry weather without precipitation or slush. If the size of the windshield wipers of a Priora car does not suit the owner, he can try installing non-standard windshield wipers to improve visibility on the road. In driver communities and from personal experience, I can say that this part sometimes scratches the glass, but this is all because it rarely changes - change them every season and there will be no scratches on the glass.

Possible windshield wiper malfunctions

Email The purifier motor does not work, the bimetallic fuse does not operate and the F11 fuse in the mounting block does not blow.

The power wires of the gearmotor are damaged or the connector contacts are oxidized - Check the wires, clean the connector contacts

Wiper switch damaged - Replace switch

Sticking motor brushes, severe contamination of the commutator - Check the position of the brushes and clean the commutator

Broken wire in the armature winding of the electric motor - Replace the gear motor

The electric motor does not work, the bimetallic fuse trips or the F11 fuse in the mounting block blows

The brushes are frozen to the glass - Move the brushes away from the glass

A foreign object has entered the mechanism - Check the mechanism

Short circuit in the armature winding of the electric motor - Replace the gearmotor

The electric motor does not operate intermittently

Wiper switch damaged - Replace switch

Wiper relay damaged - Replace relay

Brushes do not return to park position

Wiper relay damaged - Replace wiper relay

Poor pressing of the contact petals of the limit switch to the gear motor gear - Bend the contact petals of the limit switch

Contamination of the limit switch contacts in the gearmotor - Clean the contacts

DC voltage is not supplied to the gearmotor connection block - Determine the cause of the malfunction and eliminate it

The wiper motor runs but the brushes do not move.

The gear teeth of the gear motor are broken - Replace the gear motor

Weak fastening of the crank on the axis of the gear motor gear - Tighten the crank fastening nut.

Wiper blade sizes for VAZ: Priora, Lada Kalina, Largus

To drive a car safely, you need a good overview, so it is very important to select the right VAZ windshield wiper (windshield wiper) blades for your car. Next we will tell you:

• what is affected by the length of the brushes;
• how to select brushes by length;
• what is the size of brushes for VAZ cars: Priora, Lada Kalina, Largus.

What does the length of the brushes affect?

The shape of the front glass is selected based on parameters such as the size of the car and the effect of glass on aerodynamic resistance. Therefore, both the height and width of the glass on cars of different brands and models differ. Therefore, the length of the wiper blades suitable for these cars also differs. After all, the windshield wiper lever is selected in such a way that, when in a completely vertical position, its tip falls at the center of the height of the glass. In this case, properly selected wiper blades run almost flush with the seal at the top and level with the dashboard at the bottom, allowing the blades to clean the area that gives the driver maximum visibility.

How to select VAZ brushes by length

The easiest way to find brush sizes is in the car's operating instructions. If you do not have such instructions and you cannot download them on the Internet, then remove the old brushes installed on your car and measure their length. It often happens that a person bought a car, but it has inappropriate brushes installed and there are no operating instructions. In this case, we recommend doing the following:

• place the windshield wiper arms vertically;
• measure the distance from the attachment point to the rubber seal;
• subtract 5 mm from this distance and multiply by 2, this will be the length of the brushes.

This technique can be used not only for the front brushes, but also for the rear brushes. On many machines, the lengths of the right and left brushes are different, so their optimal length can be found in the operating instructions or on the forums of the owners of such machines, for example:

1. Scorpio club https://www.souleyman.ru/forum/viewtopic.php?p=279085.
2. Opel Omega Club: https://www.opel-omega.ru/index.php?showtopic=9896.
3. Drom https://forums.drom.ru/toyota-caldina-carina-corona-premio-allion-avensis/t1151162577.html.

Brush sizes for VAZ cars: Priora, Lada Kalina, Largus

We have compiled a table that includes the dimensions of all popular cars produced by AvtoVAZ:

vipwash.ru

Standard size of wipers for Lada Priora

The standard equipment of the Priora comes with standard windshield wipers, the size of the blades is:

• on the right and left wipers of the Lada Priora sedan - 508 millimeters;
• on the rear windshield wiper, which is used in station wagon or hatchback cars, - 330 millimeters.

The standard windshield wipers of all Priora models work quite well, but many car enthusiasts are dissatisfied with the area that does not clear and remains right in the center during snowfall or heavy rain. To fix this problem, they install an extended length windshield wiper. If you are interested in this possibility, the maximum dimensions of the wipers will be as follows:

• 630 millimeters for a brush located on the driver’s side of the vehicle;
• 480 millimeters for the wiper on the passenger side of the windshield.

Replacing the Brushes of a Priora Generator With Air Conditioning ~ AUTOINTERLINE.RU

How to Priora generator brushes

If the owner of a Priora sees that the battery , then first you need to check the condition of the generator brushes . Priora with air conditioning. Do not rush to remove the gene to replace brushes, oil change +.

In what cases is it necessary to replace the charging relay? The opposite of removing the relay from the VAZ 2107 generator. It is worth noting that at first the battery charge will decrease slightly, but if the problem is not corrected in a timely manner, the battery charge will soon disappear altogether.

Alternator belt Kalina 2 with air conditioning and at. the worn brushes
of the Priora generator correct this problem .

And since this process is not so complicated, you can carry out such work yourself, taking into account advice from professionals in your field.

Tools for work

Before you begin replacing worn elements, you should prepare the necessary tools:

• wrench size 13, it is best to use an open-end wrench;
• a screwdriver; a flat tool is better suited for this task;
• a car head with a so-called size 10 wrench.

Step-by-step replacement of generator brushes

replace worn brushes without removing the generator from your car. Replacement of the Lada Lada Priora generator - replacement of the diode Priora with air conditioning and power steering.

However, according to experts, this process will be much simpler if you remove the generator from its permanent place before replacing it. Replacing the VAZ 2107 generator brushes, checking the VAZ 2107 charging relay.

After the generator is removed, the replacement process is performed in the following order:

• using a screwdriver, remove the cover, made of plastic to protect the generator
  , in order to be able to get to
  the brushes ;
• the connecting plug with the wires is disconnected from the brushes ;
• two fixing fasteners, which are located at the edges of the elements being inspected, are carefully unscrewed;
• using a size 13 wrench, unscrew the fixing bolt in the center of the element;
• after all the fasteners have been unscrewed, the brushes should be removed to inspect their external condition and replace them.

How to replace the LV without removing the generator on a Priora Luxury with air conditioning (voltage regulator)

Subscribe to the channel.

How to remove the generator brushes without removing the generator itself | Priora 2

Removing and installing the generator

Lada
Priora
16 valve with
air conditioning
,
alternator
.